valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Descaling filter 13.Steam release button 14.Steam release button “Pulse steam”* 15.Iron pilot light 16.Soleplate 17.Fabric protection soleplate cover* * Model dependent “auto” function This steam station has a unique “auto” function. When switching on the appliance it automatically sets the “auto” temperature setting and “auto” steam setting, which are suitable for all fabrics that can be ironed. The “auto” function prevents clothes from being damaged due to an unsuitable temperature being selected. The “auto” function does not apply to fabrics that cannot be ironed. Please check the garment care label for details or try ironing on a part of the cloth not visible normally. How to use the steam station 1. When the steam station is plugged in and main power button set to the “on” position (button illuminated), the display (8) lights up and shows all icons for 2 seconds. 2. After that time, the appliance shifts automatically to the “auto” settings the icons will flash until the temperature and steam settings are reached: enen 3. Temperature settings: Temperature level selection touch icon is used to change the temperature of the iron soleplate, if auto setting is not required Automatic temperature selection of the iron soleplate. It is suitable for any type of fabric which can be ironed on this setting Indicates that the selected ironing temperature is suitable for silk and synthetic fabrics. Indicates that the selected ironing temperature is suitable for wool. Indicates that the selected ironing temperature is suitable for cotton and linen. To change the temperature of the soleplate, touch the icon on the display (8) repeatedly. The iron runs through the following cycle: 4. Steam settings: Steam level selection touch icon is used to change the amount of steam coming out of the soleplate, if auto setting is not required Automatic selection of the steam flow. Low steam flow Medium steam flow High steam flow To change the amount of steam manually, touch the icon on the display (8) repeatedly. The steam generator runs through the following cycle: The selected icon flashes until the pressure corresponding to each steam level is reached. Steam is now ready to be released by pressing the steam release buttons (13 or 14*). 5. Other indicators: Indicates (flashing) that the auto shut off system has been activated. Indicates (flashing) that the water following cycle: tank(1)isemptyandmustbefilled. Indicates(flashing)thattheboilerandthefilter(12)mustberinsed. The selected icon flashes until the corresponding temperature is reached. The steam setting is automatically selected for each ironing temperature according to the The selected icon flashes until the pressure corresponding to each steam level is reached. Steam is now ready to be released by pressing the steam release buttons (13 or 14*). * Model dependent. 6. Beep activation/deactivation You can activate or deactivate a beep which may be heard when touching the icons on the display (8). To do this, simply touch the and icons at the same time for 3 seconds. After this time, a long beep will be emitted indicating that the beep has been activated or deactivated. enen Preparations before ironing (A) For details of the following actions, please see the related chapters of this user manual. 1. Release the iron from its secureLock system (10) by pulling the lever located at the heel of the iron backwards. 2. Remove any label or protective covering from the soleplate (16). 3. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad (2) from the appliance and place the iron on it on another solid, stable, horizontal surface. 4. Fill the removable water tank (1). 5. Unwind the mains cable (5) fully, and plug it into an earthed socket. 6. Set the main power button (9) to the on position (illuminated in red). 7. The temperature and steam level automatic selection function will be selected by default. This allows you to start ironing without having to select the steam or temperature levels. If required, you can select your preferred setting manually by using the touch icons on the display (8). The selected temperature and steam icons will stop flashing after a time, indicating that the appliance is ready to use. Remark: The steam generator will take more time to generate steam only on initial heating up, or after performing the de-scaling operation (Calc.n.Clean). When water is already present in the steam generator during regular use, heat up time to reach the operating temperature will be faster. 8. This appliance has a built-in water level sensor which indicates when the water tank (1) must be filled. The icon will flash when the water tank is empty. Important: • Normal tap water can be used. To prolong the optimum steam function you can mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. You can inquire about the water hardness with your local water supplier. • The wa...