valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Problem The steam generator does not come on. Possible causes • There is a connection problem. • The main power button is not switched on. Solution • Check the mains cable, the plug and the socket. • Set the main power (6) button to the “I” position. The iron does not heat up. • The main power button is not switched on. • The temperature control knob is set to the “min” position. • Set the main power (6) button to the “I” position. • Set the temperature control knob (10) to the desired position. The iron begins to smoke when switched on. • During first use: Certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. • During later use: the soleplate may be soiled. • This is completely normal and will stop after a short while. • Clean the soleplate according to the cleaning instructions in this manual. Water flows through the holes on the sole plate. • The steam function is being used before it has reached temperature. • The water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. • Reduce the steam flow when ironing at low temperatures (Variable steam control (4)). • Point the iron away from the ironing area and press the steam release button (11) until steam is produced. Dirt comes out through the sole plate. • There is a build-up of scale or minerals in the steam tank. • Chemical products or additives have been used. • Use tap water mixed 50% with distilled or demineralised water. If the tap water in your district is very hard, mix tap water with distilled water 1:2. • Clean the sole plate with a damp cloth. • Never add products to the boiler water. The iron does not produce any steam. • The boiler is not switched on or the water tank is empty. • The water tank is not fitted onto the housing correctly. • The steam regulator is set to the minimum position. • Set the main power (6) button to the “I” position and/or fill the water tank. • Fit the water tank back onto the housing correctly (you will hear a click). • Increase the steam flow by turning the steam control (4). enen Problem The ironed garment turns dark and/or sticks to the soleplate. Possible causes • The selected temperature is too high and has damaged the garment. Solution • Select a suitable temperature for the material being and clean the sole plate with a damp cloth. The soleplate turns brown. • This is a regular consequence of usage. • Clean the soleplate regularly with a damp cloth. The iron does not stop steaming after placing it on the pad. • “Intelligent steam” function activated. • Just press the trigger once again and the iron will stop steaming at once. The appliance makes a pumping sound. • Water is being pumped into the steam tank. • The sound will not stop. • This is normal. • If the sound will not stop, do not use the steam generator and contact an authorised technical service centre. Loss of pressure during ironing. Steam release button activated during a long period of time. Use the steam release button (11) with intervals. This improves the ironing result as the textiles will be dried and stay smooth better. Water leakage from the boiler Drainage plug located at the bottom of the appliance is loose. Tighten up boiler drainage plug with a coin If the above does not solve the problem, get in touch with authorized technical service. This appliance is labelled in accordance Advice on disposal with European Directive 2002/96/EG Our goods come in optimised packaging. This basically concerning used electrical and electronic consists in using non-contaminating materials which appliances (waste electrical and electronic should be handed over to the local waste disposal service equipment - WEEE). as secondary raw materials. Your local town council can The guideline determines the framework for give you information about how to dispose of obsolete the return and recycling of used appliances appliances. as applicable throughout the EU. You can download this manual from the local homepages of Siemens. frfr Nous vous remercions d’avoir achete la centrale de repassage a vapeur SL25, le nouveau systeme derepassage vapeur de Siemens. Lire cette notice tres attentivement et conservez-la pour des consultations ulterieures. Introduction Cette notice contient d’importantes informations concernant les fonctions de ce systeme ainsi que quelques conseils qui simplifieront le repassage. Ce puissant systeme produit de la vapeur sans interrupteur ce qui permet d’obtenir d’excellents resultats de repassage. Cet appareil est equipe d’un grand reservoir a eau, demontable qu’il est possible de remplir a tout moment sans besoin d’eteindre la centrale. Nous esperons que vous prendrez plaisir a repasser avec cette centrale de repassage. Remarque importante: Tenez la notice ouverte a la premiere page pour vous aider a mieux comprendre le fonctionnement de la centrale. Cet appareil repond a toutes les normes internationales en v...
Questo manuale è adatto anche per i modelli :Ferri - TS25GP100/01 (3.29 mb)