valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
• Press the steam release button again to switch the steam station back on. icon flashes. • Water tank is empty and must be • Fill the water tank. filled. “ ” icon flashes. • Boiler and filter must be rinsed. • Rinse the filter and the boiler according to the cleaning instructions in this manual (see section F). The steam generator does not come on. • There is a connection problem. • The main power button is not switched on. • Check the mains cable (5), the plug and the socket. • Set the main power button (9) to the “I” position (illuminated in red). When touching the display, the beep cannot be heard. The iron does not heat up. Water flows through the holes on the soleplate. • The beep has been deactivated. • The main power button is not switched on. • The temperature is set to a low position. • The steam function is being used before it has reached the correct temperature. • The water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. • The steam generator contains too much scale. • Activate it according to instructions in this manual. • Set the main power button (9) to the “I” position (illuminated in red). • Set the temperature to the desired position. • Reduce the steam flow when ironing at low temperatures. • Point the iron away from the ironing area and press the steam release button until steam is produced. • Clean the boiler as described in section “calc’nClean Plus” (F). The iron begins to smoke when switched on. • During first use: certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. • During subsequent use: the soleplate may be soiled. • This is completely normal and will stop after a short while. • Clean the soleplate according to the cleaning instructions in this manual. Dirt comes out through the soleplate. • There is a build up of scale or minerals in the steam tank. • Chemical products or additives have been used. • Use tap water mixed 50% with distilled or demineralised water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. • Clean the soleplate with a damp cloth. • Never add products to the water. The iron does not • The boiler is not switched on or the • Set the main power button (9) to the “I” produce any steam. water tank is empty. position (illuminated in red), and/or fill the • The steam regulation is set to the water tank. minimum position. • Increase the steam flow (see section C). 22 (button) SIE M E N S problem possible causes Solution The ironed garment turns dark and/or sticks to the soleplate. • The selected temperature is too high and has damaged the garment. • Select a suitable temperature for the material being ironed and clean the soleplate with a damp cloth. problem possible causes Solution The ironed garment turns dark and/or sticks to the soleplate. • The selected temperature is too high and has damaged the garment. • Select a suitable temperature for the material being ironed and clean the soleplate with a damp cloth. The soleplate turns • This is a regular consequence of • Clean the soleplate with a damp cloth. ENGlISH brown. usage. The appliance makes a pumping sound. • Water is being pumped into the steam tank. • Water tank (1) is not correctly inserted in the housing. • The sound will not stop. • This is normal. • Adjust the water tank correctly. • If the sound will not stop, do not use the steam generator and contact an authorised technical service centre. Loss of pressure during • Steam release button activated • Use the steam release button at intervals. ironing. during a long period of time. This improves the ironing result as the textiles will be dry and stay smooth better. Water spots appear on the garment during ironing. • May be caused by steam condensed on the ironing board. • Wipe the textile cover of the ironing board, and iron the spots without steam to dry them. Water spots appear on • Water spots are caused by steam • Water drops stop coming out of the the garment during use condensation in the hose when soleplate after using the “pulseSteam” of the “pulseSteam” cooling down after use. function for some time. function. The hose gets hot during use. • This is normal.It is caused by the steam passing through the hose during steam ironing. • Place the hose on the opposite side so that you cannot touch the hose during ironing. Water leakage from the • Filter (12) located at the side of the • Tighten up the filter. boiler. appliance is loose. The iron does not stop steaming after placing it on the pad (2). • “pulseSteam” function activated by double click. • Just press the trigger once again and the iron will stop steaming at once. If the above does not solve the problem, get in touch with the authorised technical service. You can download this manual from the local homepages of Siemens. (button) SI...
Questo manuale è adatto anche per i modelli :Ferri - TS45300/02 (4.77 mb)
Ferri - TS45359/02 (4.77 mb)