valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. Soft-Touch s Note: The soft-touch They are safe POLARIZED PLUG This appliance has a polarized the risk of electric shock, plug does not fit fully in the qualified electrician. Do not attempt TAMPER-RESISTANT SCREW Warning: This appliance is equipped with a tamper-removal of the outer cover. To reduce the do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel. Note: If the power supply cord is damaged, it personnel or in Latin America by an authorized Product 1. Spray nozzle 2. Water-fill cover 3. Dry/steam selector 4. Spray button 5. Steam button Steam Spray Dry Symbols 6. Auto shutoff light 7. Comfort Grip ™ handle 8. 360° pivoting cord 9. Heel rest 10. Temperature-ready light 11. Fabric-select dial 12. AUTO CLEAN ® button 13. Water tank 14. Soleplate 11 12 How to Use This appliance is for household use only. GETTING STARTED Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system. Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron. IRONING WITH STEAM Filling Water Tank 1. Open the water-fill cover (A). 2. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B). Do not overfill. 3. Close the water-fill cover. 4. Plug in the iron. The temperature-ready light glows (C). Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing. 5. Move the dry/steam selector to the desired steam level (D). 6. Turn the fabric-select dial to appropriate steam setting (between 4 and 6) for your fabric (E). Read garment’s label to help you determine fabric type. • The temperature-ready light glows until it reaches the appropriate temperature. • It then glows on and off during ironing. This is normal. 7. When finished ironing, turn the fabric-select dial to lowest heat setting, move the dry/steam selector to and unplug the iron. A B C E Surge of Steam Use to remove stubborn creases. 1. With water tank filled to the MAX mark, turn the fabric-select dial to at least setting 4 and wait for the temperature-ready light to go off. 2. To remove tough wrinkles, pump the button at 5-second intervals for a concentrated blast of steam. 3. When finished ironing, turn the fabric-select dial to lowest heat setting, move the dry/steam selector to and unplug the iron. Vertical Steam Use for removing wrinkles from hanging clothes and drapes. 1. Hang the garment to be steamed on a clothes hanger (curtains or drapes can be steamed once they are hung). 2. Move the dry/steam selector to . 3. Hold the iron close to, but not touching, the fabric. 4. Pull the fabric tight in your free hand and pump the button as you move the iron over the fabric (F). 5. When finished ironing, turn the fabric-select dial to lowest heat setting, move the dry/steam selector to and unplug the iron. IRONING WITH SPRAY Use to dampen tough wrinkles at any setting (G). 1. Be sure the iron is filled with water. 2. On first use, pump the button several times. DRY IRONING 1. Make sure dry/steam selector is set to . You may want to empty the water (see “Emptying Water Tank After Ironing - Optional”). 2. Turn the fabric-select dial to the desired setting. Read garment’s label to help you determine fabric type. • The temperature-ready light glows until it reaches the appropriate temperature. • It then glows on and off during ironing. 3. When finished ironing, turn fabric-select dial to lowest setting, unplug the iron and place it on its heel rest. 4. Move the dry/steam selector to . EMPTYING WATER TANK AFTER IRONING (OPTIONAL) Note: It is not necessary to empty the water after each use. 1. Turn the fabric-select dial to the lowest setting. 2. Unplug the iron and let it cool. 3. Open the water-fill cover. 4. Empty the water by holding the iron over a sink with the tip pointing down. Water will empty out of water-fill opening (H). F G H D 13 14 SPECIAL FEATURES 3-WAY AUTOMATIC SHUTOFF The automatic shutoff feature in your iron works as follows: • Once the iron reaches appropriate temperature, it will turn off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes. • As soon as you pick up the iron, it will start heating again. Wait for iron to reheat completely before resuming operation Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. CLEANING OUTSIDE SURFACES 1. Make sure iron is unplugged and has cooled completely. 2. Wipe the soleplate and outer surfa...