valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
These may be damaged by the very high temperatures. Place the pans on the pan Pans should be placed on the supports, never directly on the hob carefully. burner. Do not strike the hob and do Make sure that the pan not place excessive weight on supports and burner caps are it. correctly positioned before using the appliance. Cleaning and maintenance Cleaning Once the appliance is cool, use a sponge to clean it with soap and water. After each use, clean the surface of the respective burner parts once they have cooled down. If any residue is left (baked-on food, drops of grease etc. ), however little, it will become stuck to the surface and more difficult to remove later. The holes and grooves must be clean for the flame to ignite properly. The movement of some pans may leave metal residue on the pan supports. Clean the burners and pan supports using soapy water and scrub with a non- wire brush. If the pan supports are fitted with rubber rests, ensure that these are also cleaned. The rests may come loose and the pan support may scratch the hob. Always dry the burners and pan supports completely. Water droplets or damp patches on the hob at the start of cooking may damage the enamel. After cleaning and drying the burners, make sure the burner caps are correctly positioned on the diffuser. Caution! ¦ Do not use steam cleaners. This could damage the hob. ¦ If your hob is fitted with a glass or aluminium panel, never use a knife, scraper or similar implement to clean the point where it joins the metal. Maintenance Always clean off any liquid as soon as it is spilt. This will prevent food remains from sticking to the hob surface and you will save yourself any unnecessary effort. Due to the high temperatures endured, the wok burner and the stainless steel zones (grease drip tray, burner outline, etc. ) can change colour. This is normal. After each use, clean these areas with a product that is suitable for stainless steel. It is recommended that the cleaning product available from our Technical Assistance Service (code 464524) is used regularly. Caution! The stainless steel cleaner must not be used in the area around the controls. The (printed) symbols may be wiped off. Do not leave acidic liquids ( e.g. lemon juice, vinegar, etc. ) on the hob. Trouble shooting Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice: Fault Possible cause Solution The general electrical sys- Defective fuse. Check the fuse in the main fuse box and change it tem is malfunctioning. if it is damaged. The automatic safety switch or circuit breaker has Check the main control panel to see if the auto- tripped. matic safety switch or circuit breaker has tripped. The automatic switching There may be food or cleaning products stuck The space between the ignition sparker and the on function does not work. between the ignition sparkers and the burners. burner must be clean. The burners are wet. Dry the b...
Questo manuale è adatto anche per i modelli :Piani di cottura - CA174221IL/07 (968.61 kb)
Piani di cottura - CA174251NL/07 (968.61 kb)
Piani di cottura - CA174291IL/07 (968.61 kb)
Piani di cottura - CA174651NL/07 (968.61 kb)