valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
How to program The hob must be switched on. 1. Select the required hotplate and power level. Then press the 3 symbol until the ‹‹ indicator is displayed. The indicator lights up on the selected hotplate. 2. Set the time using the + or - symbols. + = 30 minutes - = 10 minutes After a few seconds, the timer will start to count down. The power levels reappear on the hotplates. Once the time has elapsed The hotplate switches off. A beep sounds and the ‹ indicator lights up. Press the 3 symbol. The indicators go out and the sound stops. To cancel or change the time Select the hotplate with the § symbol. Press the 3 symbol and change the cooking time using the + or - symbols, or set to ‹‹ . Note: Any cooking time can be programmed up to 99 minutes. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childprooflock. The hob must be switched off. Press the @ symbol for approx. 4 seconds. The indicator next to the @ symbol lights up for 10 seconds. The hob is locked. To deactivate: press the @ symbol for approx. 4 seconds. The hob is unlocked. Note: The childproof lock can be accidentally activated by the presence of water spilled while cleaning, food that has spilled over or objects resting on the @ symbol. Automatic childproof lock This function automatically activates the childproof lock every time you switch the hob off. Switching on and off You can find out how to switch the automatic childproof lock on and off in the Basic settings section. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. ™. Indicator Power- Management function FunctionIndicator Function ‹ = Deactivated. * ™‚ Childproof lock ‚ = 1,000 W. minimum power. ‹ Deactivated. * ‚ = 1,500 W. ‚ Activated. . = 2,000 W. ™. Sound signals ‹ Confirmation beep and error signal deactivated. etc. S or S. = maximum power of the hob. ‚ Only confirmation beep deactivated. ™‹ Return to basic settings . All signals activated. * ‹ Personal settings. * ™† Automatic time limitation. ‚ Return to factory settings. ‹ Basic setting: switch off after 1-10 hours. * *Factory settings ‚ The basic time setting is halved: switch off after 0.5 - 5 hours. . The basic setting is quartered: switch off after 0.25 - 2.5 hours. ™‡ Duration of the time program function warning signal ‚ 10 seconds. * . 30 seconds. „ 1 minute. *Factory settings Accessing the basic settings The hob should be turned off. 1. Turn on the hob. 2. Within the next 10 seconds, press the @ symbol for 4seconds. ™‚ appears in the lower display. 3. Press the @ symbol several times until the required function appears. 4. Then select the required setting using the + and - symbols. The setting appears on the upper right of the display. 5. Press the @ symbol again for 4 seconds. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cold enough before attempting to clean it. Only use cleaning products specifically designed for glass- ceramic hobs. Follow the instructions provided on the packaging. Do not use: abrasives, harsh cleaners ( such as oven sprays and stain removers), sponge scourers, high pressure cleaners or steam Glass scraper Do not attempt to clean the hob surface with the base of the scraper. This could result in scratching. : Risk of injury!! The blade is extremely sharp. Risk of cuts. Protect the blade when not in use. Replace the blade immediately when any imperfections are found. Care of the appliance Apply an additive to protect and preserve the hob. Follow the advice and warnings provided with the product. Hob frame In order to avoid damage to the hob frame, follow the indications below: ¦ Use only slightly soapy hot water ¦ Do not use sharp or abrasive products ¦ Do not use a glass scraper Fixing malfunctions Malfunctions are commonly due to small details. Before calling the Technical Assistance Service, you should consider the following advice and warnings. Indicator Malfunction Solution none The electric power supply has been inter- Use other electrical appliances to check whether there has been a rupted. power cut. The appliance has not been correctly con- Check that the appliance has been connected correctly according to nected according to the connection dia- the connection diagram. gram. Electronic system malfunction. If the above checks do not resolve the malfunction, contact the Technical Assistance Service. “ flashes The control panel is damp or an object is Dry the control panel area or remove the object. resting on it. * If the indication persists, call the Technical Assistance Service. Do not rest hot pans on the control panel. Indicator Malfunction Solution “§ + number / Electronic system malfunction. Turn t...