valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
For dual double-flame burners, the inner and outer flames can be controlled separately. The available power levels are as follows: Operating and residual heat indicator All the hotplates have an operating and residual heat indicator which comes on when the flame on the corresponding hotplate is lit. Once the hotplate is switched off, the residual heat indicator remains on indicating that the hotplate temperature is too high. Do not touch the hotplate while the indicator light is on. After a while the residual heat indicator will go off, indicating that the temperature of the hotplate has dropped and is no longer too high. Care must then be taken when touching the appliance to avoid burns, since the hotplate may not have completely cooled down. Protection against overheating The hob has an overheating protection system to protect the electronics. This system switches off all the burners in case of overheating, with the operating indicators of all the burners and main switch starting to flash. Turn all control knobs to setting 0. Wait until the appliance has cooled down sufficiently and the main switch operating indicator has turned off. Now you can reconnect the appliance normally. The rapid flickering of the burner operating indicators switches off or is replaced by the residual heat indicator. Childproof lock Activating the childproof lock: 1.Switch off the hob using the main switch #. 2.Press the childproof lock @ for several seconds until the child lock indicator comes on. Now the hob cannot be switched on. Deactivating the childproof lock: Press the childproof lock @ for several seconds until the main switch indicator comes on. Now the hob can be switched on normally. Setting U Control knob off High flame ™ Maximum capacity or aperture and electricity on Low flame s Minimum capacity or aperture Inner and outer flame on full power. Outer flame on low power, inner flame on full power. Inner flame on full power. Inner flame on low power. Warnings This appliance will not function if it is not connected to the mains or if the electricity supply is cut off. It is normal to hear a soft whistling noise while the burner is operating. When first used, it is normal for the burner to give off odours. This does not pose any risk and does not indicate a malfunction. They will disappear in time. An orange-coloured flame is normal. This is caused by the presence of dust in the atmosphere, spilt liquids, etc. Keep the burner as clean as possible. If the ignition sparkers are dirty they will not light properly. Clean them periodically using a small non-wire brush. Bear in mind that the ignition sparkers must not suffer any serious impacts. Cooking guidelines Burner Very high -High Medium Low Wok burner Boiling, steam-Reheating and keeping ing, griddling, things hot: cooked and pre- toasting, paellas, cooked dishes Asian food (wok). Rapid burner Escalopes, Rice, white Steaming: steaks, ome-sauce, ragout fish, vegetalettes, frying bles Semi-rapid Steamed pota-Reheating, keeping things burner toes, fresh vege-hot and making tasty cassetables, vegetable roles stews, pasta Auxiliary Cooking: casse-Defrosting Melting: but- burner roles, rice pud-and slow ter, choco ding, caramel cooking: veg-late, jelly etables, fruit and frozen products Operating indicators and error messages Indicators Description Meaning The childproof lock indicator lights up. Childproof lock activated: press the childproof lock switch for 4 seconds to activate the appliance. The main switch indicator lights up. The appliance is ready for use. The main switch indicator and the operating All the burners are switched on or are still hot. indicators of the burners light up. The main switch indicator lights up and the The burner could not be switched back on operating indicator of one of the burners (because it is dirty, there are bits of food stuck flashes. to it, the burner components are not correctly positioned or there is a strong draught). The main switch indicator is turned off and the Operating error: control knob is on without first operating indicator of one of the burners switching on the main switch. flashes. Automatic off: the appliance has been on for more than six hours. The main switch indicator and the operating Protection against overheating: turn all the con- indicators of the burners flash in succession. trol knobs to setting 0 and allow the appliance to cool until the operating indicators switch off or the residual heat indicator comes on. Indicators Description Meaning The main switch indicator is off and all the oper-Electronic error: turn all the controls to setting 0 ating indicators flash in succession. and turn on the appliance again with the main switch. If the indicators continue to flash, contact the Technical Assistance Service. Cooking pans Suitable pans Burner Minimum pan Maximum pan diameter diameter Wok burner 22 cm Rapid burner 22 cm 26 cm Semi-rapid burner 14 cm 20 cm Auxiliary burner 12 cm 16 cm Precautions for use...