|
Facilità d'uso
WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the appliance. WHAT TO DO IF YOU SMELL GAS Do not try to light any appliance. Do not touch any electrical switch. Do not use any phone in your building. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, service agency or the gas supplier. 1 US CA DATA PLATE PLAQUE SIGNALETIQUE PLACA DE DATOS CONVERSION LABEL ETIQUETTE DE CONVERSION ETIQUETA DE CONVERSION US CA US CA Contents 3 Safety and warnings 4 Installation instructions 10 Introduction 22 Using your cooktop 23 Care and cleaning 26 Troubleshooting 30 Warranty and service 31 Important! SAVE THESE INSTRUCTIONS The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website or contact your local Fisher & Paykel dealer. Electrical Shock Hazard Disconnect product from the mains power supply before servicing. This appliance is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded power outlet. Do not under any circumstances cut or remove the grounding prong from this plug. Failure to follow this advice may result in electrical shock or death. US CA 4 Safety and warnings Installation WARNING! WARNING! Cut Hazard Take care - panel edges are sharp. Failure to use caution could result in injury or cuts. Important safety precautions! This appliance shall be installed in accordance with the installation requirements of the local gas authority or the appropriate installation code or in the absence of local codes with the latest National Fuel Gas Code ANSI Z223.1 or CAN/CSA B149.1,2 (Canada). Local building and electrical codes must be adhered to. Electrical installation must be in accordance with the National Electrical Code, ANSI/NFPA70 latest edition or CSA C22.1 (Canada) and/or local codes. Installation in manufactured (mobile) home: installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1, or with local codes where applicable. Installation in Recreational Park Trailers: installation must conform with state or other codes or, in the absence of such codes, with the Standard for Recreational Park Trailers, ANSI A119.5. Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. Flexible appliance connectors shall meet the requirements of ANSI Z21.24 and State Boards. They shall not exceed 36 inches in length. In order to avoid hazard, these appliances must be installed according to these instructions. This appliance must be installed by an authorized person (Warning: this appliance must be installed by a licensed plumber or gas fitter when within the Commonwealth of Massachusetts). Please make this information available to the person installing the appliance as it could reduce your installation costs. Please leave these instructions with the appliance. Inform the customer to retain for future reference and for the local inspectors’ use. Failure to install the appliance correctly could invalidate any warranty or liability claims. Only genuine replacement parts may be used for servicing the appliance. These are available from your nearest Fisher & Paykel Service Center. Safety and warnings 5 US CA Before you install the appliance, please make sure that the local distribution conditions (nature of gas and pressure) and the adjustment of the appliance are compatible. For adjustment conditions for this appliance, see ‘Connecting the cooktop to the gas supply’ and ‘Gas rate summary’. a suitable isolating switch is incorporated in the fixed wiring in an acceptable position. the appliance is connected to a power outlet that is electrically grounded in accordance with local codes or in the absence of local codes, with the National Electric Code ANSI/NFPA 70 or CSA C22.2 (Canada). there is a power outlet (120V 60Hz) within reach of the appliance cable (for CG122 models, a grounded power outlet should be located within 36”/914 mm of the right rear corner of the cutout; for CG244 models, a grounded power outlet should be located within 36”/914 mm...
Questo manuale è adatto anche per i modelli :Piani di cottura - CG244 (5.15 mb)