valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
Note: Make sure on/off light switches are accessible. 1. Remove clips and screws from back of lights. 2. Using screws, fasten brackets and lights together. 3. Mount clear light/bracket diagonally on front of roll bar and red light/bracket on rear of roll bar, both on side closest to traffic. Photo 1 Locking Quick Release/ Wheel Installation and Operation 1. With quick release lever in “open” position, insert wheel axle completely into trailer axle receiver. 2. Close quick release lever, with lever aimed towards rear of trailer. Photo 2 3. Verify that tires are inflated to pressure marked on the tire side wall. 4. To remove wheel from trailer axle, push locking button on side of quick release lever and open lever. Note: The locking quick release lever securely attaches the wheel to the trailer. If you have difficulty removing the wheel, release pressure on the quick release by pushing the end of lever in toward the trailer before pushing the locking button. Light Installation Note: Clear light is mounted facing forward, on side closest to traffic. Red light is mounted facing rear, on the side closest to traffic. Note: Make sure on/off light switches are accessible. 1. Remove clips and screws from back of lights. 2. Using screws, fasten brackets and lights together. 3. Mount clear light/bracket diagonally on front of roll bar and red light/bracket on rear of roll bar, both on side closest to traffic. Photo 1 Locking Quick Release/ Wheel Installation and Operation 1. With quick release lever in “open” position, insert wheel axle completely into trailer axle receiver. 2. Close quick release lever, with lever aimed towards rear of trailer. Photo 2 3. Verify that tires are inflated to pressure marked on the tire side wall. 4. To remove wheel from trailer axle, push locking button on side of quick release lever and open lever. Note: The locking quick release lever securely attaches the wheel to the trailer. If you have difficulty removing the wheel, release pressure on the quick release by pushing the end of lever in toward the trailer before pushing the locking button. Front of Trailer Front of Trailer Red Light Red Light Roll Bar Roll Bar Clear Light Clear Light PHOTO 1: Light Installation PHOTO 1: Light Installation Quick Release Lever Quick Release Lever Locking Button Locking Button Rear of Trailer Rear of Trailer PHOTO 2: Wheel Installation PHOTO 2: Wheel Installation WARNING WARNING MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL SHAFT FULLY INSERTED INTO AXLE RECEIVER. YOU SHOULD NOT BE ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY INSTALLED WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR SERIOUS INJURY. MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL SHAFT FULLY INSERTED INTO AXLE RECEIVER. YOU SHOULD NOT BE ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY INSTALLED WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR SERIOUS INJURY. BURLEY DESIGN Copyright © 2008 by Burley Design LLC. “Burley” is a registered trademark of Burley Design LLC : Rev 06/08 : 170056 Euro d’lit...
Questo manuale è adatto anche per i modelli :Biciclette - 09 d'lite (540.37 kb)
Biciclette - 09 Solo (540.37 kb)