valutazioni - 5, GPA: 3.6
(
)
)
|
Facilità d'uso
It's a proven fact that a regular exercise program can improve your physical and mental health. Too often, our busy lifestyles limit our time and opportunity to exercise. The Magnetic Fusion 4550 Bike provides a convenient and simple method to begin your assault on getting your body in shape and achieving a happier and healthier lifestyle. Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. Read this manual carefully before using the Magnetic Fusion 4550 Bike. Although Stamina constructs its products with the finest materials and uses the highest standards of manufacturing and quality control, there can sometimes be missing parts or incorrectly sized parts. If you have any questions or problems with the parts included with your Magnetic Fusion 4550 Bike, please do not return the product. Contact us FIRST! If a part is missing or defective, please call us toll free at 1-800-375-7520 (in the U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday. If you would like to contact us online, go to our website at and access the Customer Service section. Be sure to have the name and model number of the product available when you contact us. Computer Post Rear Frame Pulse Sensor Adapter Pulse Coil Wire Left Pedal Strap EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 4550 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size W1 WARNING LABEL(89) 5 HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES mm. in. 11/20 21/2 31/2 41/2 51/2 61/2 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 MILLIMETERS 6810 12 NOTICE: The length of all bolts and screws, except those with flat heads, is measured from below the head to the end of the bolt or screw. Flat head bolts and screws are measured from the top of the head to the end of the bolt or screw. length length After unpacking the unit, open the hardware bag and make sure that you have all the following items. Some hardware may be already attached to the part. Part No. and Description Qty 56 Carriage Bolt (M8 x 1.25 x 45mm) 2 57 Carriage Bolt (M8 x 1.25 x 75mm) 4 58 Bolt, Button Head (M8 x 1.25 x 40mm) 2 59 Bolt, Button Head (M10 x 1.5 x 15mm) 6 60 Bolt, Hex Head (M8 x 1.25 x 80mm) 1 61 Bolt, Round Head (M6 x 1 x 15mm) 7 64 Screw, Round Head (M5 x 0.8 x 12mm) 4 72 Nut (M8 x 1.25) 1 75 Acorn Nut (M8 x 1.25) 6 76 Arc Washer (M6) 3 77 Arc Washer (M8) 6 78 Arc Washer (M10) 4 79 Lock Washer (M6) 3 80 Lock Washer (M8) 6 81 Lock Washer (M10) 6 83 Washer (M10) 2 6 ASSEMBLY INSTRUCTIONS 7 STEP 1 Attach the FRONT STABILIZER(2), the short one with the WHEELS(52), to the front of the FRONT FRAME(1) with CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25)(75). Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at customerservice@staminaproducts.com. STEP 2 Attach the REAR STABILIZER(4), the one with the LEVELING CAPS(53), to the REAR FRAME(3) with CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25)(75). STEP 3 Screw the STAND(54) all the way up into the bottom of the FRONT FRAME(1). Connect the PULSE PLUG WIRE(39) to the PULSE EXTENSION WIRE(40). Insert the REAR FRAME(3) into the FRONT FRAME(1) and secure with BUTTON HEAD BOLTS(M10x1.5x15mm)(59), ARC WASHERS(M10)(78), WASHERS (M10)(83), and LOCK WASHERS(M10)(81). NOTE: See page 12 for detailed leveling instructions to prevent rocking. ASSEMBLY INSTRUCTIONS 8 STEP 4 Refer to illustration A. Attach the HANDRAIL(6) to the SEAT FRAME(5) with CARRIAGE BOLTS (M8x1.25x45mm)(56), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25) (75). STEP 5 Refer to illustration B. Slide the SEAT FRAME(5) onto the REAR FRAME(3) and lock in position with the ADJUSTMENT KNOB(50). Attach the STOPPERS(51) to the top end of the REAR FRAME(3) with HEX BOLT(M8x1.25x80mm)(60) and NUT(M8x1.25)(72). Also, please verify that the other STOPPERS(51) are assembled at the factory. B. A. (Assembled at the factory) NOTE: Be careful not to damage the PULSE SENSOR WIRES(44) when attaching the HANDRAIL(6) and the SEAT FRAME(5). A...
Questo manuale è adatto anche per i modelli :Biciclette - Exercise Bike 15-4550 (754.74 kb)