Log:
valutazioni - 5, GPA: 4.4 ( )

Istruzioni per l'uso Creda, Modello TSF24K

Produttore : Creda
File Size : 871.42 kb
File Nome : 460fa93c-7226-409b-a349-606872eb5d32.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Note also the information given on the appliance. 1. THIS HEATER IS VERY HEAVY, BEFORE INSTALLING ENSURE THAT THE SUPPORTING SURFACE IS STRONG ENOUGH TO SUPPORT THE WEIGHT OF THE HEATER (SEE BELOW “INSTALLED WEIGHTS“). IN ORDER TO MAINTAIN STABILITY AND TO ENSURE ITS FUTURE SAFETY IN USE, IT IS ESSENTIAL THAT IT IS SECURED TO A SOUND WALL BY MEANS OF THE FIXING SUPPLIED. IRREGULAR SURFACES SUCH AS MAY RESULT FROM CARPETS OR TILED SURROUNDS PARTIALLY PROTRUDING UNDER THE HEATER SHOULD BE AVOIDED. IMPORTANT: ACCESSORY FEET ACCESSORY FEET ARE AVAILABLE TO FIT THESE HEATERS, AND SHOULD BE USED WHERE THE HEATER WILL STAND ON THICK PILE CARPETS OR IN A SITUATION WHERE OTHERWISE THE OUTLET GRILLE MAY BE OBSTRUCTED. Installed Weights TSF24K 137 kg TSF32K 176 kg TSF42K 215 kg 2. All Installations must be supervised by a qualified electrician. Installations and wiring must be conform to the current IEE regulations (UK), local or appropriate regulations (other countries). PLEASE NOTE: THESE HEATERS MUST NOT BE CONNECTED TO A 30 AMP RING CIRCUIT. 3. For assembly of the heater the following tool Is required: Screwdriver Torx 20 4. The minimum clearances given below must be strictly adhered to. DO NOT POSITION THE HEATERS UNDER WINDOWS WHERE CURTAINS MAY CONTACT THE HEATER. t— 100 \ ------------------ BELOW SHELF, OVERHANG: Minimum clearances of 100 mm above and to both sides of the heater must be maintained. PARTLY CONCEALED BY FASCIA PANEL. NB air ducts © and © must be maintained. Oonditions under The heater set and bricks are supplied separately. The heater set Is mounted on a wooden pallet for transit and consists of the following: Which despatched 1. Heater case 2. Heating element set containing: elements accessory bag with wall fixing, charge control knob, wall bracket screws 3. 3 Wall spacer brackets: packed on top of heater case CAREFULLY UNPACK HEATER SET AND CONFIRM THAT PARTS ARE COMPLETE BEFORE REMOVING PACKAGING FROM SITE. Bricks are supplied In boxes of 3, marked 328 600. MODEL TSF24K TSF32K TSF42K BRICKS SUPPLIED 6 Packs 8 Packs 10 Packs Rating label « 1L/N/EARTH 240V/50HZ 1L/N/EARTH 240V/50HZ TSF 32K ^ /T\ > 7 h Q -m- 1500 W Typ: S30 E 4571 W X 15 W Ü I 176 kg Made in Germany | §j] 32 kWh E-Nr.: 46/2548 FD: weight ) charge acceptance -X~X control part ~7WV~ auxiliary heating fan t assembly 1 .Take the heater out of its packaging. Dispose of the packing 2. Remove thermostat knob on the right side panel. Remove the material in an appropriate way. Screw the two side wall contact fastening screws for the two side walls, strips onto the back panel of the heater. Screw the upper wall contact strip onto the two wall contact strips on the sides. 3. Note: The side panels have keyhole-shaped cutouts. For more clearness see also step 19 on page 5. Push the left-hand and right-hand side walls vertically about 5 mm upwards and then pull off sideways. Undo the fastening screws for the front panel. 4. Swing the front panel forwards and remove it from the upper edge. Insert the connecting cables and strain-relieve (see also electrical connection page 7). The connecting leads should be cut to a suitable length so that they cannot come into contact with any hot surfaces of the heater. No loops of cable should be left behind or underneath the unit. Core space cover 5. Stability The heater must be fixed securely to a solid wall to prevent movement. A screw with wal...

Questo manuale è adatto anche per i modelli :
Fans - TSF32K (871.42 kb)
Fans - TSF42K (871.42 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie