valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
. . ... . . . ... . . . ... . . . ... . . . ... . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Information.. . . . ... . . . ... . . . ... . . . ... . . . ... . . . 2 Before YouBegin .. . . . ... . . . ... . . . ... . . . ... . . . ... . . . 3 Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Receiving inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation. . . . ... . . . ... . . . ... . . . ... . . . ... . . . ... . . . 5 Remove the rear doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Install the fan frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Install the fan assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Optional Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Operation.. . . . ... . . . ... . . . ... . . . ... . . . ... . . . ... . . . 9 Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connect the power supply . . . . . . . . . . . . . . . . . . . . . . . . 10 How to set the fans based on wattage . . . . . . . . . . . . . . . . 11 Temperature override . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 How to set the temperature override . . . . . . . . . . . . . . . . . 13 How to set the fans based on temperature . . . . . . . . . . . . . 14 Alarm Settings. . ... . . . ... . . . ... . . . ... . . . ... . . . ... . . 15 LED legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 How to Communicate Using the A-Link. . . . . . . . . . . . . . . . . . 16 Howtoconnect to the A-Link . . . . . . . . . . . . . . . . . . . . . . 16 Warranty and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Warranty limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Obtaining service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Rack Air Removal Unit Installation Life-Support Policy. . ... . . . ... . . . ... . . . ... . . . ... . . . .. 20 General policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Examples of life-support devices . . . . . . . . . . . . . . . . . . . . 20 Specifications — ACF102BLK. . .... . . .... . . .... . . .... . . 21 Rack Air Removal Unit Installation General Information Introduction The American Power Conversion NetworkAIR® Rack Air Removal Unit removes heat generated by the exhaust of equipment contained in a NetShelter VX or NetShelter EP EIA 19-inch enclosure. The three fans provide increased air flow needed to cool densely-packed equipment and allow air to bypass obstacles in the rear of the enclosure such as power and data cables. An optional duct kit removes the heat entirely from the data center. Features Features of the Rack Air Removal Unit: . Variable fan settings . based on power load and user-definable exhaust temperature . Dual input connectors . for redundant power . Three individually fused fans . allows unit to be used for redundancy or higher capacity . Alarm LEDs . system status, fan status, and thermal control status . Duct kit . for removal of heat from the air-conditioned space (optional) . Integrated smoke detector (optional) . APC Environmental Management System . for remote control and monitoring of the Rack Air Removal Unit (optional) NetworkAIR Rack Air Removal Unit Installation Safety Information For computer-room use only. Install the Rack Air Removal Unit only on racks that are loaded with equipment, Warning counter-weighted, or stabilized to avoid tipping of the rack. Inspect the Rack Air Removal Unit for damage before installation. Disconnect power to the Rack Air Removal Unit before installing it into the rack. Failure to do so may result in personal injury or damage to equipment. Do not apply power to the unit until the installation is complete. The Rack Air Removal Unit contains moving parts, which are potentially hazardous when operated outside of the rack. Do not attempt to move a heavily-loaded enclosure by yourself. Doing so introduces risk of injury due to muscle strain or to tipping of the enclosure. Fully-loaded enclosures require at least two people to move safely. Do not attempt to install the Rack Air Removal Unit by yourself. Doing so introduces risk of injury due to muscle strain or to tipping of the enclosure. The Rack Air Removal Unit requires at least three people to install safely. Check that the power cord plugs and sockets are in good condition before installation. Connect the Rack Air Removal Unit to 230V IEC C-13 outlet. The outlet must be connected to appropriate branch circuit/mains protection (fuse or circuit breaker). Connection to any other...