valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
By maintaining constant air flow through the crawl space, problems such as fungus growth, dry rot, and radon gas will be reduced or eliminated. An integral temperature switch allows fan operation only at air temperature above 50°F. EL-1 UNIT INCLUDES: 120 volt ELIMINATOR™ fan unit with integral temperature fan control and mounting hardware. OPTIONAL CONTROL: EDH Eliminator™ De-Humidistat: 120 volt De-Humidistat to allow operation of fan at a set humidity level of the crawl space. READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION. This device MUST be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the precautions required, and has complied with all the requirements of the authority having jurisdiction. Please retain these instructions after installation. Installed By: Phone: Installation Date: page 2 MOUNTING INSTRUCTIONS Remove any manual covering door on the crawl space vent w 1. here the unit is to be installed. (See Figure 1) If plastic automatic vents are used, remove the closure vanes before installing fan onto vent. (See Figure 2) 2. Hold ELIMINATORTM unit against the vent. Mark and poke 4 holes through the backing screen. This is to be done at the location where the slotted mounting holes and the vent grill mesh intersect. (See Figure 3) 3. Secure ELIMINATORTM to the grill mesh of the vent with the supplied mounting anchors. Insert the flat edge of the mounting anchor through the slotted holes in...
Questo manuale è adatto anche per i modelli :Fans - Eliminator EL-1 (818.69 kb)
Fans - Eliminator 46267300 (818.69 kb)