valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
If the filters are attached incorrectly, they may become detached and fall down. Do not touch the lamps or their peripheral areas when they are ON, or your hand may be burned as they get hot. • Do not use a gas range with nothing on the burners. Otherwise the range hood could become overheated and it might be a cause of failure. Stop running the range hood immediately if a fire occurs while cooking. Continued operation of the range hood will add intensity to the fire. 5 re and maintenance Clean the range hood as many times as possible (especially, clean the filter once a month) as it becomes dirty and deteriorates in function if it’s left unclean. For a family size of 4 to 5 people and cooking twice a day, clean the filter once every two weeks to avoid grease contamination and grease build-up, which is difficult to clean. A CAUTION Control Switches Before replacing the light bulb or cleaning the range hood, be sure to set the lamp and off switches to the OFF position, then switch off the breaker of service panel. For safety, always wear working gloves, safety glasses or goggles while cleaning the filter, etc. Keep people away when cleaning to avoid injury from unexpected falling of filter or splashing of detergent. CAUTION • Do not splash water on the electric parts such as the switch, motor, or connectors. Do not use a spray type detergent to clean electric parts. It may cause trouble. • Do not use solvents such as thinner, benzine or the like and polishing powder for cleaning the painted surfaces, face plates, etc. as these parts may become lusterless or scratched. Breaker Do not wash parts with a hard brush or the like for cleaning as they can cause damage. 6 disassembling Filter First, loosen the knob holding the filter, then slide it in the direction of the arrow to disengage from the catches. NOTE: As the filter may have grease built-up, be careful when removing it. cleaning_ 1 Filter After immersing the filter in water with a mild detergent for 30 to 40 minutes, wash it with a toothbrush or the like to remove dirt. Clean the filter frequently to avoid grease contamination and grease buildup, which is difficult to clean. 2 Enclosure After wiping the Enclosure off with a cloth immersed in a mild detergent, wipe off moisture thoroughly with a dry cloth. re-assembling_ Re-assembly will be done by following the opposite way of disassembly procedure described in Item “disassembling”. (1) Make sure that the filter is fixed in the appropriate position firmly. (2) Make sure that there is no abnormal vibration sound when running. 7 cing the light bulb Two 35Watt halogen light bulbs can be installed in this range hood. Prior to replacing the light bulb, purchase a halogen light bulb (Bulb type MR16, GU10), rated 120V - 35Watt or below. To remove the light bulb, push and turn it counterclockwise. Then, replace the light bulb with a new one. NOTE: • When replacing the bulb, wait until it has cooled off before removing, or you may burn your hand. • When installing the bulb, be sure to fix to the socket securely. • To remove the light bulb • To install the light bulb 8 prior to requesting service Prior to requesting service, do the following check by yourself for common errors. Situation Check Range Hood does not operate. Is power switch on at the service panel? Range Hood is noisier than usual or vibrating. Is the filter contaminated by grease? Lamp does not turn on. Is the bulb broken? Is the bulb put in the socket correctly? NOTE • Service parts are kept at the manufacturer for a maximum of six years after ceasing the production of this model. • Requesting service indirectly can be done through contacting the dealer who sold this range hood to you. • When the range hood is not working normally even after checking common errors, please provide the following information to Fuji Industrial USA, Inc. (FIU). Fuji Industrial USA, Inc. 16300 Christensen Rd, Ste 212 Seattle WA 98188-3403 Telephone: 1-888-547-9880 After Service Division Telephone: 1-866-FUJI IND (1-866-385-4463) a. Product..........................Range Hood b. Model Number.................EBW-600/660 c. Serial Number d. Date of purchase e. What is the problem? f. Owner's address g. Owner's telephone number h. Suggested date for service person's visit inspection label The model number and serial number are indicated on the inspection label, which is attached to the inside of the Range Hood. Remove the filter to see it. 9 cifications Refer to the following table. Model Voltage (V) Frequency (Hz) Speed Power Consumption (W) Air Flow (CFM) Noise Level (dB) Weight (lbs) at 0 Pa at 25 Pa EBW-600 Hi 320 640 630 53.0 46.3 120 60 Me 240 390 370 41.0 EBW-660 Lo 200 200 170 30.0 50.7 NOTE FUJI INDUSTRIAL CO., LTD. has measured airflow under HVI-916 and noise levels under Japanese Industrial Standard (JIS) C9603 items 8.8 and 8.9. 10 parts list 11 limited product warranty T...
Questo manuale è adatto anche per i modelli :Fans - EBW-660 (845.37 kb)