valutazioni - 3, GPA: 4.3 ( )

Produttore : Fujioh File Size : 568.34 kb File Nome : buf01_02_om.pdf Lingua di insegnamento:

If you do not do so, damage to the electrical insulation may result. © Fasten the filter and other parts securely. Incorrect attachment may result in personal injury or damage to property. 0‘. Do not use a commercially sold filter or filter cover on the filter part as it may affect its performance and cause of troubles. Keep your hands and other objects away from the fan while it is in motion. If not, personal injury or damage may result. © To protect hands from injury from the edges of the sheet metal, wear working gloves while servicing. NOTE: The safety instructions are explained with the following pictographic symbols. 0 : means prohibition. It indicates actions, if any, that mustn’t be done. • : means forcible execution. It indicates actions, if any, that must be done. 3 name of parts LIGHT Button.....LAMP turns ON Hi Button.....In case of heavy cooking (smoke) Me Button.......Usual position Lo Button.......In case of light cooking (smoke) OFF Button.....FAN stops and LAMP turns off 4 how to use Before operation, make sure that the screws of the filter and lamp cover are tightened securely. A CAUTION • During cooking, do not touch the filter or its screw. If the filter is attached incorrectly it may become detached and fall down. • Keep your hand and other objects away from the fan (part) while it is in motion, or it may result in personal injury or damage. Do not use a gas range with nothing on the burners. Otherwise the range hood could become overheated and it might be a cause of failure. Stop running the range hood immediately if a fire occurs while cooking. Continued operation of the range hood will add intensity to the fire. operating the Range Hood_ The range hood has five control switch buttons on its front cover. IPush one of the switches (Lo, Me, or Hi) according to your cooking need. The fan will start rotating. ^ To stop the fan, just push the OFF button. 3Push the LIGHT button if you want to turn the light on. To turn it off, push the OFF button. 5 re and maintenance Clean the range hood as many times as possible (especially, clean the filter once a month) as it becomes dirty and deteriorates in function if it’s left unclean. For a family size of 4 to 5 people and cooking twice a day, clean the filter once every two weeks to avoid grease contamination and grease build-up, which is difficult to clean. A CAUTION • Before replacing the light bulb or cleaning the range hood, be sure to turn the push button switch OFF and switch off the breaker of service panel. • For safety, always wear working gloves, safety glasses or goggles while cleaning the filter, etc. • Keep people away when cleaning to avoid injury from unexpected falling of filter or splashing of detergent. ca CAUTION • Do not splash water on the electric parts such as the motor, switch, or connectors. Do not use a spray type detergent to clean electric parts. It may cause trouble. Do not use solvents such as thinner, benzine or the like and polishing powder for cleaning the painted surfaces, face plates, etc. as these parts may become lusterless or scored. Do not wash parts with a hard brush or the like for cleaning as they can be damaged. 6 disassembling Filter First, remove the knob holding the filter, then slide it in the direction of the arrow to disengage from the catches. NOTE: As the filter may be grease built-up, be careful when removing it. cleaning_ Filter After immersing the filter in water with a mild detergent for 30 to 40 minutes, wash it with a toothbrush or the like to remove dirt. Clean the filter frequently to avoid grease contamination and grease build-up, which is difficult to clean. 2 Front Cover After wiping the front cover off with a cloth immersed in a mild detergent, wipe off moisture thoroughly with a dry cloth. NOTE: The stainless type of the front cover is clear coated to avoid greasy dirt. Be careful not to scour strongly when cleaning as it may be scratched or discolored. re-assembling_ Re-assembly will be done by following the opposite way of disassembly procedure described in Item "disassembling”. (1) Make sure that the filter is fixed in the appropriate position firmly. (2) Make sure that there is no abnormal vibration sound when running. I I detergent 7 replacing the light bulb_ One 40W light bulb can be installed in this range hood. Prior to replacing the light bulb, purchase an ordinary mini-light bulb (in the base diameter 17 mm: intermediate base), rated 120V - 40W or below. 1 Unscrew the knob fixing the lamp cover to open it. 2 Replace the light bulb with a new one. NOTE: When replacing the bulb, wait until it has cooled off before removing, or you may burn your hand. 3 Fasten the knob firmly after closing the lamp cover. 8 requesting service prior to requesting service_ Prior to requesting service, do the following check by yourself for common errors. Situation Check Range Hood does not operate...

Scarica la tua

Per scaricare, digitare 2 cifre :