valutazioni - 3, GPA: 3.7 ( )

Produttore : Rangemaster File Size : 1.25 mb File Nome : Lingua di insegnamento:

Hood Type 54 72 L2 515 695 GB 15 • Replace the fi lter support • Screw the fi lter support using the 2 screws 12c (2,9 x 6 ,5) provided. • Replace the grease fi lters make sure that the handle is visible on the outside. Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a fl exible or rigid pipe o 150 or 120 mm, the choice of which is left to the installer. • To install a o 120 mm air exhaust connection, insert the reducer fl ange 9 on the hood body outlet. • Fix the pipe in position using suffi cient pipe clamps (not supplied). • Remove any activated charcoal fi lters. RECIRCULATION VERSION AIR OUTLET • Drill a hole o 120 or 150 mm in the shelf above the hood and connect the hood canopy outlet to the top part of the wall unit by means of a rigid or fl exible pipe of the same diameter, the choice of which is at the discretion of the installer. • To install a o 120 mm air exhaust connection, insert the reducer fl ange 9 on the hood body outlet. • Fix the pipe in position using suffi cient pipe clamps (not supplied). • Ensure that the activated charcoal fi lters have been inserted. ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. USE Control Panel The hood can be switched on pushing directly onto the requested speed without fi rstly having to select 0/1 button. KEY LED FUNCTIONS L 0/1 Light Turns lighting on and off. T1 0/1 Motor on First speed. When pressed for about 2 seconds the motor is switched off. T2 Speed on Second speed. T3 Speed on Third speed. T4 Speed Fixed Max. speed Flashing Intensive speed. Suitable for the strongest cooking vapours and odours. The function becomes active when the button is pushed for about 2 seconds. After 10 minutes of functioning it turns off automatically. This function can be interrupted by means of pressing any of the buttons. S1 Led Fixed Indicates that the Metal grease filters saturation alarm has been triggered, and the filters need to be washed. The alarm is triggered after 100 working hours. (Reset; check the Maintenance-paragraph) Flashing indicates that the activated charcoal odour fi lter saturation alarm has been triggered, and the filter has to be replaced; the metal grease filters must also be washed. The activated charcoal odour filter is triggered after 200 working hours. (Activation and Reset; check the Maintenance-paragraph) GB 16 REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. MAINTENANCE Grease filters CLEANING METAL GREASE FILTERS Alarm signal reset • Switch of the lights and extractor motor. • Press button T3 for at least 3 seconds, until the leds start to flash. Cleaning the filters • The filters are washable an...

Scarica la tua

Per scaricare, digitare 2 cifre :