valutazioni - 5, GPA: 4.2
(
)
)
|
Facilità d'uso
foil duct tape • knife • zip ties • caulking gun • 1/2” I.D. drain hose • smoke pencil Balancing Tools • Pitot Tube Balancing Kit [Case, 8 ft. vinyl tubing, Pitot tube, magnehelic gauge (0 -0.25”), and mounting plate] or • Pitot Tube with instructions and Digital Manometer (with resolution of 0 -0.25” -must read to 1/100ths of an inch) Optional Accessories • 20 Minute Fan Timer • Wall Mounted Dehumidistat • Weather hood Kit • Round Diffuser 4” (100mm) 5” (125mm) 6” (150mm) 8” (200mm) • Kitchen Grille -may be required by code for kitchen applications -contains removable grease filter Application Heat Recovery Ventilators (HRV) are designed to provide fresh air while exhausting an equal amount of stale air. The HRV is equipped with an aluminum core. The device uses the stale air that is being exhausted to condition the fresh air as it is being brought in. General These instructions are intended as a general guide and do not supersede local codes in any way. Consult authorities who have jurisdiction before installation. Table of Contents Shipping and Packaging List ......................................1 Required Tools............................................................1 Application ..................................................................1 General .......................................................................1 Engineering Data.....................................................2-5 Installation Instructions ...............................................6 Clearances & Requirements.......................................7 Installation..............................................................7-10 Application Illustrations........................................11-16 Remote Control Devices...........................................17 Wiring the Controls ...................................................18 Electrical ..................................................................19 Operation ..................................................................20 Wiring Diagrams .......................................................21 Interlocking HRV to Furnace.....................................22 Air Flow Balancing...............................................24-25 Troubleshooting ........................................................26 Maintenance ............................................................27 * LEAVE FOR HOMEOWNER TI-CCU-001 NOTE: Due to ongoing research and product development, specifications, ratings and dimensions are subject to change without notice. Engineering Data Model RNC120F THERMALLY CONDUCTIVE, PATENTED ALUMINUM CORE The cross-flow heat recovery core transfers heat between the two airstreams. It is easily removed for cleaning or service. MOTORS AND BLOWERS Each Air stream has an independent motorized impeller. 3 speed operation 120VAC FILTERS Washable air filters in exhaust and supply air streams. MOUNTING THE HRV Four threaded inserts at corners of case designed to accept four reinforced polyester straps that are supplied with the unit. DEFROST Fan defrost system. Fresh air motor turns off and Exhaust motor switches to high speed to defrost core. CASE Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated to prevent exterior condensation. Drain connection 1 -1/2" (12 mm) OD. CONTROLS Unit is supplied with a remote HRV control box which can be conveniently located within 3’-0” of the HRV. HRV System Control HRV defaults to LOW SPEED when plugged in. HIGH SPEED option is accessible by connecting remote controls to designated terminals inside electrical box of HRV. Standard LOW SPEED SETTING can be increased to medium low. Performance Net supply air flow in cfm (L/s) against external static pressure E.S.P (external static pressure) [cfm (L/s)] @ 0.1" (25 Pa) 125 (59) @ 0.2" (50 Pa) 120 (56) @ 0.3" (75 Pa) 114 (54) @ 0.4" (100 Pa) 109 (51) @ 0.5" (125 Pa) 106 (50) @ 0.6" (150 Pa) 99 (47) @ 0.7" (175 Pa) 94 (44) @ 0.8" (200 Pa) 89 (42) Sensible Effectiveness @ 65 cfm (30 L/s) 32°F (0°C) 72% *Sensible Efficiency @ 65 cfm (30 L/s) 32°F (0°C) 55% *Sensible Efficiency @ 65 cfm (30 L/s) -13°F (-25°C) 45% VAC @ 60HZ 120 WATTS / Low speed. 63 WATTS / High speed 150 Amp rating 1.5 *Sensible Efficiency - thermal **Latent Efficiency - moisture Off (Standby)/Low or OFF/HIGH speed operation is also available. Note: Effectiveness - based on temp. differential between the 2 airstreams Efficiency - takes into account all power inputs DUCT CONNECTIONS 5” duct connections with “field” selectable standard airflow or reverse airflow for limited room installations. 140 WEIGHT 42 lbs. (19 kg) SHIPPING WEIGHT 45 lbs. (20.5 kg) 120 OPTIONAL ACCESSORIES 100 3 2 1 3 - High Speed 2 - Medium Low Speed 1 - Low speed 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Static Pressure (in w.g.) 99-132 20 Minute Fan Timer -initiates high speed ventilation for 20 minutes. (3 wire) 20 gauge wire (min.) 100’ length Air Flow ( cfm) 80 99-101 Crank Timer 99-116 De...
Questo manuale è adatto anche per i modelli :Fans - RNC120F (1.62 mb)