valutazioni - 5, GPA: 4.4
(
)
)
|
Facilità d'uso
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. GENERAL SAFETY INFORMATION When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following: 1. Read all instructions before installing or using exhaust fan. 4. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and 2. Use this unit only in the manner intended by the manufacturer. standards, including fire-related construction. If you have questions, contact the manufacturer. 5. Sufficient air is needed for proper combustion and exhausting 3. Before servicing or cleaning the unit, switch power off at of gases through the flue (chimney) of fuel burning equipment to service panel and lock the service disconnecting means to prevent back drafting. Follow the heating equipment prevent power from being switched on accidentally. When the manufacturer’s guideline and safety standards such as those service disconnecting means cannot be locked, securely fasten published by the National Fire Protection Association (NFPA) a prominent warning device, such as a tag, to the service and the American Society for Heating, Refrigeration, and Air panel. Conditioning Engineers (ASHRAE), and the local code authorities. SAVE THESE INSTRUCTIONS 210572116 Rev. B 5-06 1 of 4 GENERAL SAFETY INFORMATION (Continued) CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS. 6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. 7. Ducted fans must always be vented to the outdoors. 8. This unit must be grounded. 9. To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE. 10. Acceptable for use over a bathtub or shower when installed in a GFCI protected branch circuit. 11. NEVER place a switch where it can be reached from a tub or shower. WARNING: DO NOT USE IN KITCHENS INSTALLATION INSTRUCTIONS CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION. SECTION 1 Preparing the Exhaust Fan 1. Unpack fan from the carton and confirm that all pieces are present. In addition to the exhaust fan you should have: 1 - Grill 1 - Damper Assembly (attached) 1 - Instruction/Safety Sheet 2. Remove the fan’s venturi assembly, which is secured in place with one screw through the venturi (Figure 1). This is a captive screw and will stay installed in the venturi. Keep the venturi assembly and the grill in the carton until needed so they do not get damaged or lost. 3. Choose the location for your fa...
Questo manuale è adatto anche per i modelli :Fans - BF50A (84.59 kb)
Fans - BF70A (84.59 kb)
Fans - BF75 (84.59 kb)
Fans - BF85 (84.59 kb)