valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
(Menu OSD: p 109) 6 Repeat steps 2~4 to select OFF to cancel this feature. Note • The normal optical zoom functions from 1X to 10X. • As magnification increases, resolution significantly decreases. • Because the image is enlarged digitally, the picture may become distorted when higher magnification levels are used. • When the level falls below 10X, the normal zooming function will resume. • Focus distance becomes 1.2 m (4 feet) if the lens is in full telephoto. 40 For assistance, please call :1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Digital Zoom (Continued) Digital Zoom (Continued) 3, 4 JOG KEY 2MENU 1POWER 5PLAY MagicPix™ Images Color recording of video or still images onto the Mini DV tape in low lighting. Note •MagicPix cannot be used with still images on the Memory Card. (See “Card PhotoShot”on page 49.) 2, 3MAGIC PIX 1POWER Digital Features VCR mode 1 Set POWER to VCR. 2 Press MENU to display the VCR FUNCTIONS menu screen. 3 Rotate JOG KEY to select DIGITAL EFFECT , then press JOG KEY to display the DIGITAL EFFECT menu screen. 4 Rotate JOG KEY to select D. ZOOM , then press JOG KEY to select ON. •Press MENU to exit. 5 Press (PLAY) to start playback. •The center portion of the image doubles in size. 6 Repeat steps 2~4 to select OFF to cancel this feature. 1 Set POWER to CAMERA. 2 Press MAGIC PIX. •“MAGICPIX”will appear on the screen. 3 To cancel the Digital Function, press MAGIC PIX again. EVF/LCD Note •The image will be brighter than with GAIN UP, however motion jitter will be much greater. Digital 41 42 Forassistance, pleasecall: 1-800-211-PANA(7262) orsende-mailto: consumerproducts@panasonic.com Digital Features NORMAL EIS ON 1 Set POWER to CAMERA. 2 Press EIS to stabilize the picture. • Picture flicker may be observed when taping under fluorescent lighting conditions. • The EIS indicator flashes when the light level is inadequate. • Turn D.E.I.S. OFF during recording when using a tripod. 3 Press REC/PAUSE to start recording. 4 Press EIS again to cancel. • Be sure that D.E.I.S. is turned off when not needed. Dual Digital Electronic Image Stabilization System (D.E.I.S.) This feature helps compensate for any unintentional hand or body movement. It can be used in both the Recording and Playback (VCR) modes. CAMERA mode VCR mode • Other Digital Functions are turned off automatically when the EIS and Digital Zoom are selected. A Set POWER to VCR. B Press (PLAY) to start playback. C Press EIS to stabilize the picture. D Press EIS again to cancel. • Be sure that D.E.I.S. is turned off when not needed. Note • When using D.E.I.S in VCR mode, the image size is slightly larger. Note 1, A POWER 2, 4, C, DEIS BPLAY D.E.I.S. may not function when... • Palmcorder movement is too extreme. • Recording a subject with distinct horizontal or vertical stripes. • Recording in low light situations. • Recording a subject under a great amount of fluorescent light. • Recording a scene with very fast motions. 3REC/PAUSE Other Digital Functions Other Digital Functions Use the following features to add interest and professionalism to your recordings or playback. Select from twelve special effects. 3, 4, 5 JOG KEY 2MENU 1POWER Types of Digital Functions MIRROR Symmetrical image from the current camera picture. STROBE The recording appears as a sequence of still frames. MOSAIC The picture appears in a mosaic pattern. SLIM The picture is expanded vertically. TRAIL The subject being recorded creates a trail when in motion. STRETCH The picture is expanded horizontally. GAIN UP (Not available during playback) Picture sensitivity is increased. • The image will be brighter than normal, however motion jitter will occur. WIPE (Not available during playback) Successive scenes are separated in a way which simulates the drawing of a curtain. MIX (Not available during playback) The current scene is mixed in with the following scene during scene changes. P-IN-P (Not available during playback) PinP (Still image) is displayed on the Main Picture. SEPIA (Only available during playback) The picture is played back in sepia, a brownish color, giving it an antique look. B/W (Black-and-white) (Only available during playback) The picture is played back in black-and white. Digital Features 1 Set POWER to CAMERA or VCR. 2 Press MENU to display the menu screen. 3 Rotate JOG KEY to select DIGITAL EFFECT in the CAMERA or VCR mode menu screen, then press JOG KEY to display the DIGITAL EFFECT menu screen. 4 Rotate JOG KEY to select EFFECT in the CAMERA mode menu screen or EFFECT1 / EFFECT2 in the VCR mode menu screen, and then press JOG KEY repeatedly to select one of the Digital Functions listed on the left. 5 To cancel the Digital Function, press JOG KEY repeatedly to select OFF. Note • The EIS and Digital Zoom features are turned off automatically when one of the Digital Functions listed at left is selected. To use the WIPE function a.In Camera mode, set the “EFFECT” item in the main menu screen to “WIPE”. (Menu OSD: p. 108) ...