valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
tennis stroke) for improved STILL or SLOW MOTION playback when watching the tape on this Palmcorder. r L Auto Shutter Before you begin- • Connect the Palmcorder to a power source. (See pages 11, 12.) • Set POWER Switch to CAMERA. • Insert a cassette with record tab. (See page 6.) In the AUTO mode (no indication in the EVF and LCD monitor), the Palmcorder will automatically adjust the shutter speed (up to 1/350). AUTO mode is automatically selected whenever the POWER Switch is set to CAMERA. Manual Selection 2, 3, 4jog KEY 1 MENU Button • For proper color reproduction, it is recommended that you use this feature outdoors. For indoor High Speed Shutter recording, additional halogen or tungsten light should be provided. Fluorescent lignt will degrade the picture • This feature requires ample light. More light is required for the fastest snutter speeds. • The Auto Focus system may not operate properly in insufficient light when using the High Speed Shutter. • When PROG.AE is ON, you cannot manually select the shutter speed. • When MAGICVU is ON, Program AE and H.S.S. cannot be set in the menu. Audio/Video Fade In/Out You can make smoother scene transitions for a more professional look. 1 , AfADE Button 2,B REC/PAUSE Button 1 2 3 Press MENU to display the Camera mode menu in the EVF or the LCD monitor. Rotate and press JOG KEY to select QjjIBEB, then rotate and press JOG KEY to select [¡EES- Press JOG KEY to select • SHUTTER SPEED menu is displayed. Rotate JOG KEY to choose one of the following shutter speeds. 1/100 +—* 1/60 «—►AUTO*-» 1*000 ♦-♦1/4000 I J t/250 «—» 1/500 *—► 1/1000 «—► IttOOO«—1 • Press MENU three times to exit. Fade In Starting the first scene with “fade in” is very effective. 1 2 3 In REC/PAUSE mode, hold down FADE until the picture fades out. Press REC/PAUSE to start recording. Release FADE and the picture will gradually fade in. Fade Out Use to create a soft ending or (together with fade in) for a soft transition from one scene to the next. B 48 During recording, hold down FADE until the picture fades out. Press REC/PAUSE to pause the recording. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Special Features Audio Dubbing using the Externat or Built-in Microphone The original sound can be replaced with new sound using the built-in Palmcorder microphone or an external microphone. External Microphone with M3 connector (not supplied) External Microphone Jack POWER Switch 3a. DUB Button Optional 3a.dub Button Before you begin- • Connect the external Microphone (if used). • Turn on the Palmcorder. • Insert a pre-recorded tape to be dubbed. The AUDIO-REC setting in CAMERA MENU mode should be as follows: 12 bit The original sound is recorded on ST (Stereo) 1, and the new sound will be recorded on ST (Stereo) 2. 16 bit The original sound is replaced with the new sound. 1 Select 12 bit if you do not want the original sound to be completely replaced during an audio dub. If you dub over a tape which has both 12 bit and 16 bit audio recordings on it, keep in mind that the original 16 bit audio portion will be completely replaced. 1 Set POWER to VCR. • The POWER lamp lights red. • Be sure POWER is fully turned to VCR position. • If you have the Optional Remote Control, you can set the Palmcorder to stop automatically at a specified point on the tape. See “Memory-Stop Editing” on page 50. Press PLAY. Then press PAUSE where you want dubbing to begin. Press A.DUB on this unit (for 3 seconds) or on the remote control (optional, page 64) to put the Palmcorder in the Audio Dub mode. • “A.DUB” flashes in the EVF or the LCD monitor. r 49 Special Features Button To listen to the desired audio sound, set the AUDIO setting of the VCR mode MENU (see page 17) as follows: AUDIOrThe following selections are available for 12 bit AUDIO dubbed recordings only (sound recorded in SP mode only). ST 1 Set this position to listen to the original sound. ST 2 Set this position to listen to the audio dubbed sound. MIX Set this position to listen to both the original sound and the audio dubbed sound. 16 bit dubbed sound completely erases the original 16 bit recorded sound. If you dubbed using 12 bit AUDIO recording and then selected AUDIO-MIX in the menu for playback, the sound will be stereo regardless of the AUDIO-OUT setting. If you recorded in LP mode, you cannot use the A.DUB feature. Memory-Stop Editing (Optional Remote Control Only, page 64) You can set an automatic Dubbing stop point. Optional Dreset Button Amenu Button Press PAUSE to start Audio Dubbing. • Connect the Palmcorder to the TV in order to monitor the sound. (See page 31.) Only NTSC (National Television Standards Committee) recorded tapes can be audio dubbed. The following screen appears if the tape was not recorded in NTSC format. 5 Press PAUSE to stop Audio Dubbing. • If the microphone used for dubbi...