valutazioni - 4, GPA: 4.5
(
)
)
|
Facilità d'uso
-When connecting to the AC Jack (When using the AC Adaptor) -When connecting the USB Cable or the DV Cable to a PC or other equipment -When the PC Mode (For PV-GS39/PV-GS59) Menus Related to Playback .. AUDIO OUT This switches the sound to be played back. Set [ SETUP] >> [ AUDIO OUT] >> [STEREO], [L] or [R]. [STEREO]: Stereo sound (main sound and sub sound) [L]: Left channel sound (main sound) [R]: Right channel sound (sub sound) Other Menus .. INITIAL SET • Set to Tape/Card Recording Mode. Set [ SETUP] >> [ INITIAL SET] >> [YES] or [NO]. Set to [YES] to change menu settings back to their factory default condition. • The initializing takes a little while. • Language setting cannot be back to the initial shipping condition. .. DEMO MODE • Set to Tape Recording Mode. If you set [ SETUP] >> [ DEMO MODE] >> [ON] without inserting a cassette or a card, the Camcorder is automatically set to the demonstration mode for introducing its functions. If any button is pressed or operated, the demonstration mode is canceled. If no operations take place for approx. 10 minutes, the demonstration mode automatically starts. To terminate the demonstration mode, insert a cassette or a card, or set to [ DEMO MODE] >> [OFF]. For normal use, set this function to [OFF]. LP Mode You can switch the tape recording speed. • Set to Tape Recording/Playback Mode. 1 Set [ BASIC] or [ ADVANCED] >> [ REC SPEED] >> [LP]. If the LP mode is selected, the recording time will be 1.5 times the SP mode, but some functions will be disabled. • We recommend using the SP mode for important recordings. • In order to fully exhibit the performances of the LP mode, we recommend using Panasonic cassettes marked LP mode. • Audio dubbing is not possible with LP Mode. (p. 53) • In the LP mode, the picture quality will not be degraded in comparison with the SP mode, but mosaic noise may appear on the playback image or some functions may be disabled. -Playback on other digital video equipment or on digital video equipment without the LP mode. -Playback of the image on other digital video equipment recorded in the LP mode. -Slow Motion/Still Advance playback. Before 29 30 About Recording • When recording pictures on a tape, set the Mode Dial to Tape Recording Mode [ ]. • When recording still pictures on a card, set the Mode Dial to Card Recording Mode [ ] (For PV-GS39/PV-GS59). • When recording with the [AUTO/MANUAL/FOCUS] Switch set to [AUTO], the Camcorder automatically adjusts the Focus and White Balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually. (pp. 41, 44) • Before turning on the power, remove the Lens Cap. If the Lens Cap is still attached when the power is turned on, Automatic White Balance Adjustment (p. 41) may not function correctly. Recording on a Tape 1 Set the [OFF/ON] Switch to [ON]. • The [STATUS] Indicator lights Red. 2 Set the Mode Dial to Tape Recording Mode. • The [ TAPE RECORDING MODE] is displayed on the screen. 4 Press the Recording Start/Stop Button again to pause the recording. • The [PAUSE] and [ ] Indication appears. 3 Press the Recording Start/Stop Button. • Recording starts. • The [RECORD] and [.] Indication appears. Recording Mode S P 3 h 5 9 m 5 9 s 2 9 f R 2 : 0 0 1 2 : 3 4 : 5 6 A M J A N 2 2 0 0 6 1 0 0 * These indications are displayed only when the card is inserted. (For PV-GS39/PV-GS59) 1) Recording mode 2) Recording time elapse 3) Remaining tape indication 4) Still picture size 5) Quality of still pictures 6) Number of recordable still pictures (When no picture can be recorded, this indication will flash in red.) .. On-screen Display in the Tape Recording Mode 1) 3) 4)* 5)* 6)* 2) • For the recording time on a tape, refer to page 16. • Carry out a recording check (p. 31) to verify that the image is recorded properly. • In order to find the unrecorded section, carry out the blank search (p. 31). .. Concerning the remaining tape time indication on the screen • The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.) • During a 15-second or shorter recording, the remaining tape time indication may not be displayed or the remaining tape time may not be displayed correctly. • In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time. (PV-GS39/ PV-GS59) (PV-GS29) S P 3 h 5 9 m 5 9 s 2 9 f R 2 : 0 0 1 2 : 3 4 : 5 6 A M J A N 2 2 0 0 6 1 0 0 R E C O R D S P 3 h 5 9 m 5 9 s 2 9 f R 2 : 0 0 1 2 : 3 4 : 5 6 A M J A N 2 2 0 0 6 1 0 0 P A U S E • Open the LCD Monitor or extend the Viewfinder before turning on the power. • When this unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a wide-screen TV. To make this unit compatible with regular TVs (4:3), change the [ ASPECT] setting before recording the images (p. 39) or change the [ TV ASPECT] setting when watching them on the connected TV (p. 51). To Check...