valutazioni - 3, GPA: 5
(
)
)
|
Facilità d'uso
2 Choose the desired option, and then press the A button. ENTER RETURN White balance mode 3 Press the MENU button to end the setting. Note: • The white balance mode can be confirmed using the on- screen information. • In Set mode, resetting will be necessary when the DVD Video Camera is turned off. (All other modes of the white balance will be stored in memory.) • If “Input Source: LINE” or “S LINE” has been specified, you cannot use the “Set” mode of white balance (P. 88). lSetting white balance manually 1 Point the DVD Video Camera at a white object so that it fills the screen. Use an object that is not transparent. If the object that fills the screen is not White thick paper focused, correct the focus using “Manual Focus”, P. 64. 2 Press the MENU button, choose “White Bal.”, “Set”, and then press the A button. 3 Hold Apressed until the “h“ indicator changes from blinking to a steady light. When the “h“ indicator lights, the white balance setting will be complete. 4 Press the g button to end the setting. Note: Camera Func t i ons Setup Set Ou tdoor RAM Program AE Whi te Bal. Dig .Zoom EIS Aut o IndoorWin d Cut Wide ENTER RETURN Set EXIT RAM 0:00:00 REM 30MIN 8 : 00AM FINE SEP 30 200 4 • It is recommended that you specify “Dig. Zoom: Off” (See page 57) before setting white balance. • Do not use a colored object when setting white balance: The appropriate tint cannot be set. • The white balance cannot be set when the digital zoom is engaged or under low light: The “h” indicator will blink at this time. • If the white balance that was manually set before is kept, the “h” indicator will blink (re-setting the white balance will change the “h” indicator to a steady light). Note: • Do not block the infrared sensor (see “Terminology” on page 148) with hand, etc. Infrared sensor block • If a optional-user provided tele or wide-conversion lens is used, the auto white balance may not operate depending on the recording conditions. If this happens, set the mode to match the recording conditions, or manually set the white balance. • Be sure to remove the lens cap before turning the DVD Video Camera on: If the DVD Video Camera is turned on with the lens capped, the white balance will not work normally. 82 Using the Electronic Image Stabilizer (EIS) When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image. 1 Press the MENU button, choose “EIS” on the “Camera Functions Setup” menu screen, and then press the Abutton. 2 Choose “On” or “Off”, and then press the A button. Camera Funct i ons Setup Program AE Whi te Bal. Dig. Zoom EIS Of f On ENTER RETURN RAM Wind Cut Wide 3 Press the MENU button to end setting. lChecking whether EIS is On or Off You can check whether EIS is On or Off by the on-screen information display. EIS 30MIN 0:00:00 REM FINE SEP 30 2004 8:00AM After recording with EIS set to “Off”, it is recommended that you return the setting to “On” and then turn the DVD Video Camera off, unless you normally record with EIS “Off” setting. Note: • The EIS setting will be stored in memory even when the DVD Video Camera is turned off. • It is recommended that you specify “EIS: Off” when using the DVD Video Camera on a desk or tripod. • When “EIS: On” is specified, there will be a slight difference between the actual movement and the movement on screen. • Gross camera shake may not be entirely corrected even if “EIS: On” is specified. Firmly hold the DVD Video Camera with both hands. • EIS may not operate correctly when the tele or wide- conversion lens (optional-user provided) is used. • When you record pictures with setting 10x or more of magnification and turning the EIS to “ON” in dim places, after-images may stand out. In this case, we recommend using a tripod with turning the EIS to “OFF” (only for VDRM50PP). • The EIS function cannot be used when still images are recorded on the card (only for VDR-M70PP). Reducing Wind Noise during Recording (Wind Cut) When recording sound from the microphone built into this DVD Video Camera, you can reduce wind noise in recording. If “Wind Cut: ON” is specified, the low-frequency components in the sound picked up by microphone will be cut off during recording: This makes it easier to hear the target voice or sound during playback. Camera Funct i ons Setup RAM Program AE Whi te Bal. Dig. Zoom Wind Cu EIS ENTER RETURN Wide Off On 1 Press the MENU button, choose “Wind Cut” on the “Camera Functions Setup” menu screen, and then press the A button. 2 Choose the desired option, and then press the A button. 3 Press the MENU button to end setting. 30MIN 0:00:00REM FINE 8:00AM SEP 30 2004 Wind cut icon Note: • You can also use the on-screen display to confirm that Wind Cut has been set. • The Wind Cut setting will be stored in memory even when the DVD Video Camera is turned off. • The Wind Cut function will work only during movie recording. • The Wind Cut function works only with the built-in microphone: It will not function when using an externa...