. This is repeater is used to extend digital triax cables and offers the following features. . Returns the main system SDI signals to the default value, re-clocks, and replays them in waveform. . Amplifies the return system RF signals so they are almost equivalent to base station output. Caution Limits apply to power supplied from the AJ-BS900. Be sure to consult your local dealer when using this unit to construct a digital triax system. Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. indicates safety information. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Connections To base station (AJ-BS900) To camera adapter (AJ-CA900) E - 1 Precautions to be observed when making connections Please heed the following precautions when performing connections for a system which uses this repeater. 1.Cable length The cable length should be within the following range for systems using this repeater. 1 Cable between a base station (AJ-BS900) and this repeater or between two repeaters With a ‡ 8.6 mm cable ..................... 250 m to 300 m With a ‡ 14.5 mm cable ................... 400 m to 500 m 2 Cable between this repeater and a camera adapter (AJ-CA900) With a ‡ 8.6 mm cable ..................... 50 m to 300 m With a ‡ 14.5 mm cable ................... 100 m to 500 m The above lengths apply when a Fujikura triax cable is used. The range of length possible for the cable may differ, depending on the type of cable used. 2.Power supply when using this repeater It is possible to drive the digital triax camera adapter (AJ-CA900) via a triax cable with power supplied from a digital triax base station (AJ-BS900); however, when using this repeater, it is strongly recommended that power be supplied from an external source. Up to a maximum of three repeaters can be used when the camera adapter is connected to an external power source. Further, when using a five-inch viewfinder or large lens, ensure that the output from the external power source is within designated limits. When using the repeater with power supplied from the base station only (without connecting the camera adapter to an external power source), a maximum of one repeater can be used. Please use a 1.5 or 2-inch viewfinder and a portable lens. 3.Settings This repeater is designed to be water-resistant, however avoid submerging in water and exposure to rain when using outdoors. Further, do not open the cover. Specifications BS input :100 V DC, 850 mA max. (supplied from AJ-BS900) Power consumption :7 W Dimensions (W a H a D) : 125.5 a 90 a 225.5 (mm) Weight : 2.5 kg Allowable operating temperature : 0 oC to 40 oC Allowable storage temperature : –20 oC to +55 oC Allowable operating humidity : Max. 85% Allowable storage humidity : 0% to 90% Max. number of repeaters : 3 (when power to the camera adapter (AJ-CA900) is from an external source) 1 (when power to the camera adapter (AJ-CA900) is not from an external source) S/N deterioration : 3 dB (typ.) per repeater ENGLISH E - 2 Dieser Regenerator dient zur Verlangerung von digitalen Triaxkabeln und besitzt die folgenden Merkmale. . Rucksetzung der SDI-Signale des Hauptsystems auf den Standardwert, Durchfuhrung einer Umtaktung, un...