valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• ( ) : A face registered to My Star. (To register to My Star, refer to page 73) • ( ) : A face automatically registered by camcorder. • The camcorder may detect the same face differently depending on various situations such as glasses, brightness, different postures, etc. • The camcorder registers up to 20 faces that are most frequently detected. When registering a new face in this case, the 20th face with lowest priority is replaced with a new face. However, the camcorder is able to register up to 12 faces if maximum 8 faces are registered as My Star. • The camcorder detects up to 8 faces for each scene. Registering My Star in Photo Record mode. By registering faces that are frequently recorded, you can adjust focus and exposure before recording. To use this function, insert a memory card. 1. In the submenu items, touch “My Star” 2. Focus on the desired face to register, then press the PHOTO button. • For better detection performance, it is recommended to record up to 5 photos of the left, right and front of a face. • Record only one face at a time and register. 3. To save the recorded face, touch the ( OK ) tab. • When you take 5 photos of a face, the face is automatically registered to My Star without the need of touching the ( OK ) tab. 4. In the Play mode, touch the Play ( ) tab ( ) tab. • The face registered to My Star is displayed with in the face list. 2 / 2 Face List My Star Face Detection 4 / 7 AUTOFocus Metering Magic Touch Face Detection 85 MIN • You can register up to 8 people to My Star. • The flash does not turn on when recording the My Star. • To register the same face to the My Star again, delete the previously registered face. To check the registered or detected face 1. Touch the Menu ( ) tab “Face Detection.” 2. In the submenu items, touch “Face List( ).” • To change the priority order of my stars, touch ( ). advanced recording Changing priority of registered faces in Photo Record mode You can only change or delete the importance order of faces that are registered to My Star. To use this function, insert a memory card. 1. In the Play mode, touch the Play ( ) tab ( ) tab. • To cancel the My Star, touch ( ). • To display only My Star, touch ( ). 2. Touch the ( ) tab. 3. Touch ( 123 ), then select the desired face to change. 4. Touch the ( )/( ) tabs to arrange the importance order again, then touch the ( OK ) tab. 1 / 1 HD140 MIN SD1 2 3 4 1 / 1 HD140 MIN SD1 2 3 4 Face List 140 MIN 1 / 1 2 4 1 3 OFF 123 OK 1 / 1 Edit Ranking 140 MIN OK 1 / 1 Edit Ranking 140 MIN If there is no registered face, the Face List( ) is dimmed. Magic Touch Simply touch the area on the LCD screen that you want to focus on when taking a photo. PRECHECK! Select the Photo ( ) mode by pressing the MODE button. page 49 Submenu items • Off: Disable the function. • On( ): You can simply touch the subject shown on the LCD screen that you would like to focus on. The brightness will also be adjusted for the optimized value. 1. Touch the Menu ( ) tab “Magic touch.” 2. Touch a desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( ) tab. 3888 85 MIN 4 / 7 AUTOFocus Metering Magic Touch Face Detection 85 MIN Tip Using the Magic Touch Using the Magic Touch function, you can focus on a small section of the picture. You can also activate Magic Touch by pressing the same point for about 2 seconds on the LCD screen. To take a picture when the Magic Touch function is enabled, press the PHOTO button or simply touch the subject shown on the LCD screen that you would like to focus on, then hold for about 2 seconds. When the Magic Touch function is enabled, you can touch the AF ( ) tab on the LCD screen to set the “Focus” to “Auto.” 3888 85 MIN • The following settings cannot be used with the “Magic Touch” function: “Back Light”, “Face Detection”, “Focus: Manual”, “Digital Zoom” or “Metering.” • Even if the “Cont.Shot” is enabled, continuous shooting is not available by touching the LCD screen. advanced recording Metering You can choose the metering standard for the brightness of your subject. PRECHECK! Select the Photo ( ) mode by pressing the MODE button. page 49 Submenu items • Multi ( ): Meters the multiple portions of the screen and determines the appropriate aperture. • Centre ( ): Measures the entire screen with an emphasis on the centre and determines the aperture. • Spot ( ): Measures only the centre of the screen and determines aperture. 1. Touch the Menu ( ) tab “Metering.” 2. Touch a desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( ) tab. 4 / 7 AUTOFocus Metering Magic Touch Face Detection 85 MIN Anti-Shake(HDIS) Use the Anti-Shake (HDIS: Hyper Digital Image Stabilizer) function to compensate for unstable images caused by shaking movements when holding the camcorder. PRECHECK! Select the Video ( ) or Photo ( ) mode by pressing the MODE button. page 49 1. Touch the Menu ( ) tab “Anti-Shake (HDIS).” 2. Touch a desired submenu item. 3. To exit the menu, touch the Exit ( ) or Retu...
Questo manuale è adatto anche per i modelli :Videocamere - HMX-M20SP (6.15 mb)