valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
Open the connector cover of the unit. 4. Charge the battery using the AC power adaptor or USB cable. • The CHG (charge) lamp lights up and charging starts. When the battery is fully charged, the charging (CHG) lamp turns green. .page 20 Using the AC power adaptor Connect the AC power adaptor to the camcorder properly and plug the AC power adaptor in the wall outlet. Using the USB cable Connect the USB cable to the camcorder properly and connect the other end to a USB port of a PC. • When recording indoors with an available wall outlet, it is convenient to use the AC power supply instead of the battery pack. • It is recommended to charge the battery pack in a place with ambient temperature of 50.F~86.F(10°C ~ 30°C). • When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will override the USB. • If the camcorder is turned on, the battery will still charge, but more charging time will be needed. It is recommended you to keep the camcorder turned off while charging. Connecting the USB cable ..VIEW CARD ..VIEW W T CARD CARD VIEW CARD ..VIEW CARD ..VIEW W CARD ..VIEW W T CARD ..VIEW CARD ..VIEW W T CARD CARD VIEW CARD ..VIEW CARD ..VIEW W CARD ..VIEW W T CARD ..VIEW CARD ..VIEW W T CARD VIEW ..VIEW CARD ..VIEW W CARD • Charging the battery pack at low temperature may take longer or fail to fully charge (green indicator will not turn on). • Please make sure that there are no foreign substances in the plug and socket when you connect the AC power supply to the camcorder. • Fully charge the battery pack before use. • When using the AC power supply, place it close to the wall outlet. If you experience a malfunction while using the camcorder, separate the AC power supply immediately from the wall outlet. • Do not use the AC power supply in a tight space, such as between furnishings. Connecting the AC power adaptor No Yes No Yes PRECHECK! • Charge the battery pack before using the camcorder. • Use only the provided battery pack and AC power adaptor. preparation CHECKING THE BATTERY STATE You can check the charging state and remaining battery capacity. To check the charging state VIEWWTCARDThe colour of the CHG lamp indicates the power or charging state. Charging (CHG) lamp The colour of the charging indicator shows the charging state. Charging state Charging Charge Fully Charged Error LED colour (Orange) (Green) (Orange Blink) Battery Level Display The Battery Level Display shows the amount of battery power remaining in the battery pack. Battery Level Indicator State Message - - - - - - "Low battery" 0:00:00 [475Min] STBY 16M9999 Fully charged (100%~75%) 75%~50% 50%~25% 25%~5% less than 5% Exhausted (flickers): The device will soon turn off. Change the battery pack as soon as possible. (flickers): The device will be forced to turn off after 3 seconds. - • Before using the camcorder, charge the battery. • Above figures are based on a fully charged battery pack at normal temperature. 0 Low ambient temperature may affect the use time. Available running time for the battery pack Battery Type IA-BP210E Charging time Using a AC power adaptor Approx. 180min. Using a USB cable Approx. 380min. Video Resolution 720 x 576 (50i) 640 x 480 (25p) TV Super Fine ( ) TV Fine ( ) TV Normal ( ) Web Fine ( ) Web Normal ( ) Mode Continuous recording time Approx. 250min. Playback time Approx. 280min. (Unit: minutes.) • Charging time: Approximate time (min.) required when you fully charge a completely exhausted battery pack. • We recommend using the AC power adaptor when using the Time Lapse REC function. About battery packs • The battery pack should be recharged in an environment that is between 10°C (50°F) and 30°C (86°F). However, when it is exposed to cold temperatures (below 32°C (0°F)), its usage time reduces and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-insert it. • Do not put the battery pack near any heat source (i.e. fire or a heater). • Do not disassemble, apply pressure to, or heat the battery pack. • Do not allow battery pack terminals to be short-circuited. It may cause leakage, generate heat, or cause fire. Maintaining the battery pack • The recording time is affected by temperature and environmental conditions. • We recommend only using the original battery pack that is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste. • Make sure that the battery pack is fully charged before starting to record. • To preserve battery power, keep your camcorder turned off when you are not operating it. • Even when the power is switched off, the battery pack will still discharge if it is left inserted on the camcorder. It is recommended that you remove the battery pack from the camcorder. • If the battery pack is not used for a long time, fully charge the battery pack and use it up on your...
Questo manuale è adatto anche per i modelli :Videocamere - SMX-F400BN (14.21 mb)
Videocamere - SMX-F400BP (14.21 mb)
Videocamere - SMX-F400LP (14.21 mb)
Videocamere - SMX-F400RP (14.21 mb)