valutazioni - 3, GPA: 3.7
(
)
)
|
Foto e specifiche Canon HV10 |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• Dispose of the used battery according to applicable recycling regulations. .. ..Do not pick up the battery using tweezers or other metal tools as this will cause a short circuit. .. ..Wipe the battery with a clean dry cloth to ensure proper contact. .. ..Keep the battery out of the reach of children. If swallowed, seek medical assistance immediately. The battery case may break and the battery fluids may cause internal damage. .. ..Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion. Built-in Rechargeable Lithium Battery E The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder, however, it will become totally discharged if you do not use the camcorder for about 3 months. To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected for 24 hours with the power switch set to . Additional 82 82 Do’s and Don’ts Maintenance/Others Cleaning the Video Heads .. ..In the following cases the video heads are dirty and need to be cleaned. -The message “HEADS DIRTY, USE CLEANING CASSETTE” appears. -During playback you notice frequent video problems (blocky video artifacts, banding, etc.). -When playing back a tape recorded in HDV standard the playback is jerky or the sound stutters on and off. To maintain the best picture quality, we recommend using cassettes designed for high definition recording (Canon Digital Videocassette HDVM-E63PR, etc.) and cleaning the video heads frequently with the Canon DVM-CL Digital Video Head Cleaning Cassette or a commercially available dry cleaning cassette. .. ..Do not use wet type cleaning cassettes as this may damage the camcorder. .. ..Even after cleaning the video heads you may not be able to play back correctly tapes that were recorded with dirty video heads. Cleaning the Camcorder Camcorder Body .. ..Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloth or volatile solvents such as paint thinner. Lens and Viewfinder .. ..If the lens surface is dirty, the autofocus may not work properly. .. ..Remove any dust or dirt particles using a non-aerosol type blower brush. .. ..Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use tissue paper. LCD Screen and I.AF sensor .. ..Clean the LCD screen and the I.AF sensor using a clean, soft lens-cleaning cloth. .. ..Condensation may form on the surface of the screen when the temperature changes suddenly. Wipe it with a soft dry cloth. Storage .. ..If you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and at temperatures not higher than 30 °C (86 °F). Condensation Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder. Condensation may form in the following cases: When the camcorder is moved from an air-conditioned room to a warm, humid place Do’s and Don’ts 83 When the camcorder is moved from a cold place to a warm room When the camcorder is left in a humid room When a cold room is heated rapidly TO AVOID CONDENSATION .. ..Do not expose the camcorder to sudden or extreme changes in temperature. .. ..Remove the cassette, place the camcorder in an airtight plastic bag and let it adjust to temperature changes slowly before removing it from the bag. WHEN CONDENSATION IS DETECTED .. ..The camcorder automatically shuts off, the warning message “CONDENSATION HAS BEEN DETECTED” appears for approx. 4 seconds and starts flashing. .. ..If a cassette is loaded, the warning message “REMOVE THE CASSETTE” appears and starts flashing. Remove the cassette immediately and leave the cassette compartment open. Leaving the cassette in the camcorder may damage the tape. .. ..A cassette cannot be loaded when condensation is detected. RESUMING USE E .. ..The precise time required for water droplets to evaporate will vary depending on the location and weather conditions. After the condensation warning stops flashing, wait for 1 more hour before resuming use. Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult the Canon Service Center for information on plug adapters for overseas use. Playback on a TV Screen You can only play back your recordings on TVs compatible with the NTSC system. The NTSC system is used in the following countries/areas: American Samoa, Antigua, Aruba, Bahamas, Barbados, Bermuda, Bolivia, Canada, Chile, Colombia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala, Greenland, Haiti, Honduras, Jamaica, Japan, Korea, Mexico, Micronesia, Myanmar, Nicaragua, Panama, Peru, Philippines, Puerto Rico, Saint...