Log:
valutazioni - 1, GPA: 4 ( )

Istruzioni per l'uso Canon, Modello PowerShot A640

Produttore : Canon
File Size : 4.52 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. The icon may display for a memory card with transfer settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera. (Play) Menu . See Menus and Settings (p. 19). Single Images Print Settings/Transfer Settings 2 Select [Order] and press . ..Selecting [Reset] cancels all transfer order settings. 95 3 Use the or button to select an image to transfer and press . • Pressing the FUNC./SET button again Transfer Selection deselects the setting. • You can also select images in the index playback mode. All the Images on a Memory Card 2 Select [Mark all] and press . • Selecting [Reset] cancels all transfer order settings. 3 Select [OK] and press . • Images are transferred in order according to the file number. • A maximum of 998 images can be selected. Viewing Images on a TV Set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable. Viewing Images on a TV Set 1 Turn off the camera and the TV. 2 Connect the AV cable to the camera’s A/V OUT terminal. ..Open the terminal cover by slipping a fingernail under the left end and plug the AV cable in all the way. 3 Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. 4 Turn on the TV and switch it to video mode. 5 Turn on the camera. The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 23). The default setting varies between regions. VIDEO AUDIO Yellow Black -NTSC: Japan, U.S.A., Canada, Taiwan and others -PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly. 97 Troubleshooting Camera Camera will not operate. Power is not turned on. • Press the power button (Basic Guide p. 9). Memory card slot/battery • Confirm that the memory card slot/ cover is open. battery cover is securely closed (Basic Guide p. 2). Batteries are loaded in the • Reload the batteries in the correct wrong direction. direction (Basic Guide p. 5). Batteries are not the right • Use only unused AA-size alkaline type. batteries or Canon AA-size NiMH batteries (p. 112). Battery charge is low and • Replace the camera batteries with 4 the camera will not unused or fully charged batteries operate. (“Change the (Basic Guide p. 5). batteries” message • Use the AC Adapter Kit ACK600 displays). (sold separately) (p. 119). Poor contact between • Wipe the battery terminals with a camera and battery clean dry cloth. terminals. • Reload the batteries several times. Sounds come from the camera interior. The camera’s horizontal/ • The camera’s orientation vertical orientation was mechanism is operating. There is no changed. malfunction. Troubleshooting When the power is turned on “Card locked!” message appears. The SD memory card or SDHC memory card’s write protect tab is set to “Write protect”. ..When recording to, erasing from or formatting the memory card, slide the write protect tab upward Troubleshooting When the power is turned on “Card locked!” message appears. The SD memory card or SDHC memory card’s write protect tab is set to “Write protect”. ..When recording to, erasing from or formatting the memory card, slide the write protect tab upward (p. 114). The Date/Time menu appears. The built-in rechargeable lithium battery charge is low. ..Recharge the built-in lithium battery immediately (Basic Guide p. 8). LCD monitor The display darkens. The image in the LCD monitor will darken in strong sunlight or bright light. ..This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. This image will not be recorded when shooting still images, but it will be recorded when shooting movies. Display flickers. Display flickers when shot under fluorescent lighting. ..This is not a camera malfunction (flickering recorded in movies, but not in still images). A bar of light (red, purple) appears on the LCD monitor. Sometimes appears when shooting a bright subject, such as the sun or other light source. ..This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. This bar of light will not be recorded when shooting still images, but it will be recorded when shooting movies. 99 appears. A slow shutter speed has likely been selected because of insufficient lighting. • Raise the ISO speed (p. 69) or set the flash to any setting other than (flash off), or secure the camera to something, such as a tripod (Basic Guide p. 15). appears. This displays when using a • These settings will be overwritten by memory card that has print those set by your camera (p. 91). settings or transfer settings set by other DPOF- compliant cameras. Noise displays./Subject’s movements are irregular. Camera automatically • There is no effect on the recorded lightened the image image. displayed on the LCD...

Questo manuale è adatto anche per i modelli :
Videocamere - PowerShot A630 (4.52 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie