valutazioni - 2, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Press fully (Press fully to shoot). • The camera plays the shutter sound and takes the shot. • Since the shot is being taken while the shutter sound plays, be careful not to move the camera. 18 Taking Pictures (Smart Auto) Does the length of the shutter sound change? • Since the time required to shoot differs depending on the scene you want to take, the length of the shutter sound may change. • If the camera or subject moves while the shutter sound is playing, the recorded image may be blurry. If you shoot without pressing the shutter button halfway, the image may not be in focus. Taking Pictures (Smart Auto) Since the camera can determine the subject and shooting conditions, you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels. Turn on the camera. • Press the power button. • The start-up screen will appear. Enter A mode. • Set the mode switch to A. • When you point the camera toward the subject, the camera will make a slight noise as it determines the scene. • The icon for the determined scene will appear in the upper left of the screen. • The camera will focus on detected subjects and display frames on them. • Black bars will appear on the sides of the screen. These areas will not be recorded when shooting. 19 Taking Pictures (Smart Auto) Zoom bar AF Frame What if... Compose the shot. • Moving the zoom lever toward i (telephoto) will zoom in on your subject, making it appear larger. Moving the lever toward j(wide angle) will zoom out from your subject, making it appear smaller. (The zoom bar showing the zoom position appears on the screen.) Focus. • Press the shutter button halfway to focus. • When the camera focuses, it will beep twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point. Shoot. • Press the shutter button fully to shoot. • The camera will play the shutter sound and shoot. The flash will automatically fire in low light conditions. • The image will appear on the screen for approximately two seconds. • You can take a second picture even while an image is displayed by pressing the shutter button again. • What if the color and brightness of the images do not turn out as expected? The scene icon (see Camera User Guide) that appears on the screen may not match the actual scene. If this happens, try shooting in G mode (see Camera User Guide). 20 Taking Pictures (Smart Auto) • What if white and gray frames appear when you point the camera toward a subject? A white frame appears on the face or subject that the camera detected as the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range. If the subject moves, however, the gray frames will disappear, leaving only the white frame. • What if a frame does not appear on the subject you want to shoot? The subject may not be detected, and frames may appear on the background. If this happens, try shooting in G mode (see Camera User Guide). • What if a blue frame appears when you press the shutter button halfway? A blue frame appears when a moving subject is detected; the focus and exposure will continuously adjust (Servo AF). • What if a flashing appears? Attach the camera to a tripod so that the camera does not move and blur the image. • What if the image comes out dark even if the flash fired when shooting? The subject is too far away for the flash to reach. The effective flash range is approximately 50 cm – 5.0 m (1.6 – 16 ft.) at maximum wide angle (j), and approximately 50 cm – 2.0 m (1.6 – 6.6 ft.) at maximum telephoto (i). • What if the camera beeps once when the shutter button is pressed halfway? Your subject may be too close. When the camera is at maximum wide angle (j), move about 3 cm (1.2 in.) or more away from your subject and shoot. Move about 40 cm (1.3 ft.) or more away when the camera is at maximum telephoto (i). • What if the lamp lights when the shutter button is pressed halfway? To reduce red-eye and to assist in focusing, the lamp may light when shooting in dark areas. • What if the h icon blinks when you try to shoot? The flash is charging. You can shoot when recharging ends. • What if appears when the shutter button is pressed halfway? When you press the shutter button halfway in extremely bright shooting conditions, will appear and the brightness will automatically adjust to appropriate levels. What if an icon appears in the upper left of the screen? The icon for the determined scene will appear in the upper right of the screen. For details on the icons that appear, see “Scene Icons” (see Camera User Guide). 21 Viewing Images Choosing the subject to focus on (Touch AF) After touching the subject and displaying , the focus and exposure will be maintained where the blue AF frame appears when you press the shutter button halfway (Servo AF). Press the shutter button f...