valutazioni - 3, GPA: 3.3 ( )

Produttore : Sony File Size : 2.06 mb File Nome : Lingua di insegnamento:

Disconnect the AC Adaptor from the wall socket immediately if any malfunction occurs while using your camcorder. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. • Even if your camcorder is turned off, AC power (mains) is still supplied to it while connected to the wall socket via the AC Adaptor. 8 Step 3: Turning the power on, and setting the date and time Touch the button on the LCD screen. 1 While pressing the green button, turn the POWER switch repeatedly in the direction of the arrow until the respective lamp lights up. When you record or play back an image, turn the POWER switch in the direction of the arrow repeatedly until the respective lamp lights up. [j H (Movie): To record movies o (Still): To record still images • When you turn on (Still) lamp, the screen aspect ratio is changed to 4:3 automatically. 2 Select the desired geographical area with ▲/▼, then touch [NEXT]. • The date and time does not appear during recording, but they are automatically recorded on the hard disc, and can be displayed during playback. To reset the date and time Touch (HOME) t ¡gj (SETTINGS) t [CLOCK/ LANG] t [CLOCK SET], and set the date and time. Changing the language setting You can change the on-screen displays to show messages in a specified language. Touch (HOME) t (SETTINGS) t [CLOCK/ LANG] t [ LANGUAGE SET], then select the desired language. 3 Set [SUMMERTIME], [Y] (year), [M] (month), [D] (day), hour and minute. The clock starts. 9 Getting Started Step 4: Preparing for recording * Except for DCR-SR32E/SR33E/SR42E. 1 Adjust the LCD panel. Open the LCD panel 90 degrees to the camcorder (©), then rotate it to the best angle to record or play (©). 2 Turn the POWER switch to turn on your camcorder. 3 Press WIDE SELECT repeatedly to select the desired screen aspect ratio (except for DCR-SR32E/ SR33E/SR42E). 4 Fasten the grip belt and hold your camcorder correctly. 10 Recording 1 Lens cover switch (DCR-SR32E/SR33E/ SR42E/SR52E/SR62E/ START/STOP A ( Cj ] aBOmin 1 0:00:14 /6.1 eh □ □□© rwi CE [STBY] — [REC] a60n* CTi,fi~| START/STOP B 9S9S0 h* □fl © Flashing —— Lights up EASY button 1 Slide the lens cover switch to open (DCR-SR32E/SR33E/SR42E/SR52E/SR62E/ SR72E/SR82E). • For DCR-SR190E/SR200E/SR290E/SR300E, the lens cover opens and closes automatically. 2 Turn the POWER switch until the respective lamp lights up. Press the green button only when the POWER switch is in the OFF (CHG) position. • fl~|| (Movie): To record movies • (Still): To record still images 3 Start recording. Movies PI Still Images Û Press START/STOP A (or B). Press PHOTO lightly to adjust the focus Q (a beep sounds), then press To stop recording, press START/STOp it fully B (a shutter click sounds). When llllllll disappears, the image has been recorded. • Still images are recorded on the hard disk in the default setting. 11 Recording/Playback • You can check the free hard disk space by touching (HOME) t (MANAGE HDD/MEMORY) t [Q INFO]. • If the ACCESS lamp is lit or flashing after recording is finished, it means data is still being written onto the hard disk or “Memory Stick Duo.” Do not apply shock or vibration to your camcorder, and do not remove the battery or AC Adaptor. • You can capture up to 3 still images by pressing PHOTO during movie recording (DCR-SR190E/ SR200E/SR290E/SR300E). • The maximum continuous recordable time is approximately 13 hours. • When a movie file exceeds 2 GB, the next movie file is created automatically. • The maximum recordable time are followings (with recording mode [SP]); DCR-SR32E/SR42E/SR52E/SR62E: approx. 10 hours and 50 minutes DCR-SR72E/SR82E: approx. 21 hours and 40 minutes DCR-SR33E/SR190E/SR200E/SR290E/ SR300E: approx. 14 hours and 30 minutes To record still images on a “Memory Stick Duo” You can change the recording media of still images to a “Memory Stick Duo.” You can use only a “Memory Stick Duo” marked with or Memory Stick PRO Duo- ■ Inserting/ejecting a “Memory Stick Duo” Open the LCD panel, then insert the “Memory Stick Duo” into the Memory Stick Duo slot in the right direction until it clicks. (“Memory Stick Duo”) To eject a “Memory Stick Duo,” open the LCD panel, lightly push the “Memory Stick Duo” in once. • When the ACCESS lamp is lit or flashing, your camcorder is reading/writing data. Do not shake or knock your camcorder, turn the power off, eject the “Memory Stick Duo,” or remove the battery pack. Otherwise, image data may be damaged. • If you insert the “Memory Stick Duo” into the slot in the wrong direction, the “Memory Stick Duo,” the “Memory Stick Duo” slot, or image data may be damaged. • The numbers of recordable still images on the “Memory Stick Duo” (1GB) are followings (with the default setting of the image size as shown in ( )); DCR-SR32E/S...

Scarica la tua

Per scaricare, digitare 2 cifre :