valutazioni - 2, GPA: 4.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
REMAINING SET B ON Always displays the remaining “Memory Stick PRO Duo” indicator. AUTO Displays the remaining recording time of movies for about 8 seconds in situations such as those described below. – When your camcorder recognizes the remaining “Memory Stick PRO Duo” capacity while the (Movie) lamp lights up – When you press DISP/BATT INFO to switch the indicator from off to on while the (Movie) lamp lights up – When you select the movie recording mode on the HOME MENU. b Notes • When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen. SUB-T DATE (Subtitle date) When you set to [ON] (the default setting), you can display the recording date and time while playing back the images recorded on your camcorder, on devices compatible with the subtitle display function. Refer also to the instruction manual of the display device. b Notes • The images recorded with HD (high definition) image quality can be played back only on AVCHD format compatible devices. • [SUB-T DATE] cannot be set for SD (standard definition) image quality. FLASH MODE You can select the flash setting when you record still images with the built-in flash. B AUTO Automatically flashes when there is insufficient ambient light. ON ( ) Always uses the flash regardless of the surrounding brightness. OFF ( ) Records without flash. b Notes • The recommended distance to the subject when using the built-in flash is approximately 0.3 to 1.5 m (1 to 5 feet). • Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp. • The /CHG (charge) lamp flickers while charging the flash, and remains lit when the battery charge is complete. • If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective. FLASH LEVEL You can set this function when you use the built-in flash. HIGH( ) Makes the flash level higher. B NORMAL( ) LOW( ) Makes the flash level lower. REDEYE REDUC INDEX SET REDEYE REDUC INDEX SET You can set this function when you record still images using the built-in flash. When you set [REDEYE REDUC] to [ON], then set [FLASH MODE] to [AUTO] or [ON], appears. You can prevent redeye by activating the pre-flash before the flash flashes. b Notes • The redeye reduction may not produce the desired effect due to individual differences and other conditions. FACE DETECTION Detects faces and adjusts the focus, color and exposure automatically. Also, optimizes the face image. B ON ( ) Detects a face and shows a frame on it. The detected face image is optimized automatically. Face detection frame Face detection mark ON[NO FRAMES] ( ) Detects a face without showing a frame. The detected face image is optimized automatically. OFF Does not use [FACE DETECTION] function. b Notes • Faces may not be detected depending on recording conditions. • [FACE DETECTION] may not function properly depending on recording conditions. Set [FACE DETECTION] to [OFF] in this case. The default setting is [ON], allowing you to search for faces automatically and to display the [Face Index] screen (p. 34). Face icons and their meanings : This icon appears when the setting is [ON]. : This icon flashes when your camcorder detects a face. The icon stops flashing when the face is recorded in the [Face Index]. :This icon appears when faces cannot be recorded in the [Face Index].* * The number of faces that can be detected is limited. Customizing Your Camcorder 65 PHOTO SETTINGS (Items for recording still images) Touch 1, then 2. If the item is not on the screen, touch / to change the page. How to set (HOME MENU) t page 60 (OPTION MENU) t page 72 The default settings are marked with B. B 4.0M ( ) Records still images clearly (2,304 . 1,728). 3.0M ( ) Records still images clearly in the 16:9 (wide) ratio (2,304 . 1,296). 1.9M ( ) Allows you to record more still images in relatively clear quality (1,600 . 1,200). VGA (0.3M) ( ) Allows the maximum number of still images to be recorded (640 . 480). b Notes • The set image size is effective during the (Still) lamp turning on. Capacity of the “Memory Stick PRO Duo” and the number of recordable images (Unit: number of images)* When the (Still) lamp lights up: 4.0M 2304 . 1728 1GB 475 2GB 970 4GB 1900 8GB 3850 16GB 7700 * The number of recordable still images shown is for the maximum image size of your camcorder. The actual number of recordable still images is displayed on the LCD screen during recording (p. 103). b Notes • When using a “Memory Stick PRO Duo” made by Sony Corporation. The number of recordable still images varies depending on the recording conditions or type of “Memory Stick.” • The unique pixel array of Sony’s ClearVid CMOS sensor and image processing system (BIONZ) allows for still image resolution equivalent to the sizes described. z Tips • You can also use a “Memory Stick Duo” with a capacity of under 1 GB for recording still images. FILE NO. B SERIES Assigns file...
Questo manuale è adatto anche per i modelli :Videocamere - HDR-TG1E (6.35 mb)