valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
55
1500
1050
55
1650
1050
55
1500
1050
1
2
3
4
5
Introduction of the Control and Display panel
1 Display Area
● TEMP (°C) : Real-Time display each GPU temperature.
● FAN (rpm) : Displays each fan speed in the WATERCOOLING BOX.
● PUMP (rpm) : Displays each PUMP speed on the graphics card.
2 Mode Switch Button
● Target Temperature: When the button is pressed down, and the lights go on.
- Setup the GPU temperature target for three graphics cards in the same time, and then all Fan and Pump speed will be
automatically adjusted to your target temperature.
*Adjustable Temperature Range : 30~65 °C
NOTICE
The fan will not spin until the actual temperature reaches to the target setting.
● Fan / Pump control: When the button is released, and the lights go off.
- Allows user to manually adjust each Fan and Pump speed.
3 Select the Fan to adjust the speed(rpm). *Available in Fan / Pump control mode.
● Press the button and use the knob to adjust the value. After adjusting, press again to confirm.
EX: Press once: Adjust all Fans in the same time; Press twice: Adjust the 1st fan only;
Press three times: Adjust the 2nd fan in the same time; Press four times: Adjust the 3rd fan only.
*Adjustable RPM Range: 1000~3000 rpm
4 Select the Pump to adjust the speed(rpm). *Available in Fan / Pump control mode.
● Press the button and use the knob to adjust the value. After adjusting, press again to confirm.
EX: Press once: Adjust all Pumps in the same time; Press twice: Adjust the 1st Pump;
Press three times: Adjust the 2nd Pump in the same time; Press four times: Adjust the 3rd Pump.
*Adjustable RPM Range: 1200~1500 rpm
5 Control Knob : Adjusts the Fan speed (rpm) and Pump speed(rpm).
NOTICE
Before using the WATERFORCE, please make sure the USB cable has well connected to the motherboard, and the
graphics card driver, GIGEBYTE OC GURU II has also installed.
Factory Default Setup
GPU Temperature(°C)
Fan Speed(rpm) (±5%)
PUMP Speed(rpm) (±5%)
Remark
Under 40
≤1000
1500
65~75
≥2000 1500
Please turn off the PC and check if there are
any mechanical or Pump related problem.
Above 75
Maximum:3000 1500
If the GPU temperature remains over 75°C,
please contact local service center.
12WE6-IN980WA-00IR