valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
1 RLCOfCt« «•1 0 o 0 -RCT [UMCftttLTr) ( M* I I ~J Btc RCW ÄTQP PUBT FT (•) ■ ► -1 6 Preparations • Complete necessary connections and settings See pages 24-33 • Set to One-Touch-Edit ON on SET UP menu Operations Press JOG/SHUTTLE on this unit, and check that the button is lit JOG/ SHUTTLE Press the button for the editing mode on this unit To insert picture Press VIDEO INSERT. To insert sound Press AUDIO INSERT To insert picture and sound Press VIDEO INSERT and then press AUDIO INSERT (or vice versa) To add new sound Press AUDIO DUB • The indicator that corresponds to the selected editing mode lights on the VCR display • The picture from the playback unit appears on the screen Search for the edit start point on this unit Indicators On the VCR Display VIDEO INSERT joc. SHUHUE AJOtO«« AUDIO INSERT AV INSERT AUDIO DUBBING 38 Search for the edit start point on the playback unit using Jog dial and Shuttle Ring on this unit Press JOG/SHUTTLE on this unit • Editing begins • To continue editing, press JOG/SHUTTLE on this VCR, and repeat steps 4-5 6 Press ■(STOP) on this unit to stop editing To monitor the edited audio after Audio Dubbing Press STEREO SELECT during playback and select STERE02 Notes. • Video Insert and Audio Insert are not possible m the following cases: When the tape in the recording VCR (this unit) is Recorded in LP mode, Blank, or contains a blank portion m the middle • AV Insert and Audio Dubbing are not possible in the following cases When the tape in the recording VCR (this unit) is Recorded in 16bit audio mode, Recorded in LP mode, Blank, or contains a blank portion m the middle When INPUT SELECT is set to DV IN • If the time display on this unit is set to tape counter mode during editing, this unit stops the editing operation automatically when the counter reaches “0 00 00” • In order to ensure that the editing operation is performed properly, the editing points should be set at least 20 seconds after the beginning of the tape • When using the editing controller 1or remote control In order to conserve battery power, JOG/SHUTTLE turns off after one minute If JOG/SHUTTLE turns off after the edit start point has been set on the recording unit (step 2), it is necessary to press JOG/SHUTTLE again (so that it is lit) before searching for the edit start point on the playback unit If JOG/SHUTTLE turns off after the edit start point has been determined on the playback unit (step 4), it is necessary to press JOG/SHUTTLE twice in order to start editing One-Touch Audio Mixing This function is used to mix the audio on STERE01, which has already been recorded, with audio from a external recording source (A1 or A2), and record the result on STERE02 This function is useful for adding new audio, such as music or a narration, to the original audio which has already been recorded 3 1,6 1 <©} 6 6 Preparations • Complete necessary connections and settings See pages 24-33 • Set to One-Touch-Edit ON on SET UP menu Press MIXING EDIT on this unit Operations 1 Press JOG/SHUTTLE on this unit, and check that the button is lit JOG/ SHUTTLE Search for the edit start point on the playback unit using Jog dial and Shuttle Ring on this unit Search for the edit start point on this unit Press AUDIO DUB on this unit •The picture from the playback unit appears on the screen JOG/ SHUTTLE Press JOG/SHUTTLE on this unit • Editing begins • If you wish to adjust the volume of the original audio (STERE01) and external recording source (A1 or A2) during Audio Mixing, AUDIO MIX To adjust the volume of the original audio (STERE01) AUDIO REC LEVEL To adjust the volume of the audio from external recording source (A1 or A2) • To continue editing, press JOG/SHUTTLE on this VCR, and repeat steps 5-6. 40 7 Press ■ (STOP) on this unit to stop editing To monitor the mixed signal after Audio Mixing Press STEREO SELECT during playback and select STERE02 Notes • Audio Mixing is not possible m the following cases: When the tape in the recording VCR (this unit) is Recorded in 16bit audio mode, Recorded in LP mode, Blank, or contains a blank portion in the middle When INPUT SELECT is set to DV IN • In order to ensure that the editing operation is performed properly, the editing points should be set at least 20 seconds after the beginning of the tape When editing with a microphone 1 Connect the microphone to the MIC socket 2 Press JOG/SHUTTLE 3 Use Jog Dial and Shuttle Ring to search the recording start point 4 Press AUDIO DUB 5 Press MIXING EDIT 6 Use AUDIO REC LEVEL slider to adjust the microphone level 7 Press PAUSE/SLOW 8 Press ■(STOP) to stop editing • The audio from the microphone is recorded as monaural audio Use audio cables to connect audio equipment, etc , in order to record in stereo • If both the MIC socket and the line inputs are connected, the audio from the MIC socket is given priority in recording 41 For Quick Editing Manual Copying ...