Pause Slow motion in reverse Normal speed in reverse Double speed in reverse Slow motion Double speed Normal speed (Initial speed) High speed in High speed reverse To use the shuttle ring in jog mode Use this mode for frame-by-frame playback. Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog mode during any playback mode, playback pauses so you can see a still picture. Each change in the shuttle ring position shifts the picture one frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the speed you turn the shuttle ring. To resume normal mode, press JOG again. The JOG button turns off. Tip • Adjust the picture using the PROGRAM +/– buttons on the VCR if: – Streaks appear while playing in slow motion. – Bands appear at the top or bottom while pausing. – The picture shakes while pausing. To set tracking to the centre position, press both buttons (+/–) at the same time. Notes • The sound is muted during these operations. • In the LP mode, noise may appear or there may be no colour. • If the playback mode mark doesn’t appear on the TV screen, press DISPLAY. Playing/searching at various speeds Setting the recording duration time After you have started recording in the normal way, you can have the VCR stop recording automatically after a specified duration. Before you start… • Refer to “Index to parts and controls” for button locations. 1 While recording, press z REC. The indicator appears in the display window. VIDEO SP OPC Additional Operations 2 Press zREC repeatedly to set the duration time. Each press advances the time in increments of 30 minutes. The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. 0:30 1:00 5:30 6:00 Normal recording To extend the duration Press z REC repeatedly to set a new duration time. To cancel the duration Press z REC repeatedly until the indicator disappears and the VCR returns to the normal recording mode. To stop recording To stop the VCR while recording, press x STOP. Note • You cannot display the current tape time in the display window when setting the recording duration time. Setting the recording duration time Synchronized Recording (not available on SLV-SE610N/K) You can set the VCR to automatically record programmes from equipment such as a satellite tuner by connecting the equipment to the DECODER/ LINE-3 IN*1 (or DECODER/LINE-2 IN*2) connector. The connected equipment must have a timer function for this feature to work. When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from DECODER/LINE-3 IN*1 (or DECODER/LINE-2 IN*2). How to connect for Synchronized Recording Connect the DECODER/LINE-3 IN*1 (or DECODER/LINE-2 IN*2) connector of the VCR to the TV Scart connector of the satellite tuner. Then connect the LINE-1 (TV) connector to the TV. Scart cable (not supplied) DECODER/t LINE-3 IN*1 or DECODER/t LINE-2 IN*2 i LINE-1 (TV) TV Scart connector Satellite tuner, etc. Scart cable (not supplied) Scart (EURO-AV) : Signal flow Synchronized Recording (not available...

Questo manuale è adatto anche per i modelli :
VCR / lettori video - SLV-SE610N (1.03 mb)
VCR / lettori video - SLV-SE710K (1.03 mb)
VCR / lettori video - SLV-SE710N (1.03 mb)
VCR / lettori video - SLV-SE810K (1.03 mb)