valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 44). • Display tape information on the TV screen (page 47). • Check the timer settings (page 68). • Watch another TV programme (page 47). Tips • To set the programme position, you can also use the CHAINE +/– or programme number buttons. • To set the programme position with a two digit number, press - (ten’s digit) button followed by the programme number buttons. • To set the line input video source, you can also use the CHAINE +/– buttons. • To set the tape speed, you can also use the SP/LP button. • When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set VITESSE AUTO. to NON in the OPTIONS-1 menu (page 84). • Even if you set OPTIONS PROGRAMM.* to SHOWVIEW in the OPTIONS-2 menu, you can set the timer manually. Press MENU to select MINUTERIE, then go to step 2. • To check, change, or cancel the programme setting, press Questo manuale è adatto anche per i modelli :
VCR / lettori video - SLV-SE610B (945.31 kb)
VCR / lettori video - SLV-SE710B (945.3 kb)
VCR / lettori video - SLV-SE810B (945.3 kb)