|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
You can also do the following tasks while the VCR is recording: • Reset the counter (page 38). • Display tape information on the TV screen (page 41). • Check the timer settings (page 59). • Watch another TV programme (page 41). Basic Operations continued Recording TV programmes using the ShowView® system (not available on SLV-SE630D/E) To use the Auto Tape Speed function* In step 4 above, press m to select AUTO. When you are recording a programme in the SP mode and the remaining tape length becomes shorter than the recording time, the recording tape speed is automatically changed to the LP mode. Note that some noise will appear on the picture when the tape speed is changed. To operate this function correctly, the “TAPE SELECT” setting in the USER SET menu must be accurate (see page 68). Tips • To set the line input video source, you can also use the INPUT SELECT button. • You can set the extended time for the ShowView setting by 10, 20, 30, 40, 50, or 60 minutes. Set SHOWVIEW EXTEND in the EASY OPERATION menu to the desired extended time on page 69. • To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” on page 59. Notes • If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function. • The and indicators flash in the display window when you press ?/1 with no tape inserted. • When you set TIMER METHOD to STANDARD in the EASY OPERATION menu, the SHOWVIEW menu does not appear on the TV screen. Select SHOWVIEW or VARIABLE. * not available on SLV-SE230D Recording TV programmes using the ShowView® system (not available on SLV-SE630D/E) Recording TV programmes using the timer You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. • Turn on your TV and set it to the video channel. • Set TIMER METHOD*1 to STANDARD or VARIABLE in the EASY OPERATION menu (see page 69). • Refer to “Index to parts and controls” for button locations. Press TIMER. TIMER OK For SLV-SE630D/E The TIMER PROGRAMMING PR DAY START STOP V/P menu appears on the TV screen. –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – SELECT : SET : END : OK EXIT : MENU For SLV-SE830D/E, SE737E, SX737D, SE730D/E, SX730D/E and SE230D • When you set TIMER METHOD TIMER METHOD to VARIABLE: The TIMER METHOD menu STANDARD SHOWVIEW appears on the TV screen. Press M/m to select STANDARD, then press OK. SELECT : SET : OK EXIT : MENU • When you set TIMER METHOD PR DAY START STOP V/P to STANDARD: –– –––– –– :–– –– :–– – – The TIMER PROGRAMMING –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – menu appears on the TV screen. –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – SELECT : SET : END : OK EXIT : MENU Basic Operations continued Recording TV programmes using the timer 2 OK INPUT SELECT Set the date, start and stop times, PR DAY START STOP V/P programme position, tape speed and 35 –––– –– :–– –– :–– – – VPS/PDC function*1: –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – 1 Press , to select each item in –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – turn. 2 Press M/m to set each item. SELECT : SET :To correct a setting, press < to END : OK EXIT : MENU return to that setting and reset. • To record the same programme every day or the same day every week, see “Daily/weekly recording” on page 54. • To use the VPS/PDC function*1, set V/P to ON. For details about the VPS/PDC function, see “Timer recording with VPS/PDC signals” on page 51. • To record from a decoder or other source connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the “PR” position. Press MENU to exit the menu. 3 MENU Press ?/1 to turn off the VCR. 4 The indicator appears in the display window and the VCR stands by for recording. To record from a decoder or other source, leave the connected equipment switched on. To stop recording To stop the VCR while recording, press x (stop). Daily/weekly recording In step 2 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. Press M to change the indication in reverse order. today t DLY (Monday to Sunday) t W-SA (every Saturday) ..... t W-SU (every Sunday) t 1 month later t (dates count down) t today Recording TV programmes using the timer To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also d...
Questo manuale è adatto anche per i modelli :VCR / lettori video - SLV-SE230D (2.1 mb)
VCR / lettori video - SLV-SE630D (2.1 mb)
VCR / lettori video - SLV-SE630E (2.1 mb)
VCR / lettori video - SLV-SE730D (2.1 mb)