valutazioni - 2, GPA: 3.5 ( )

Produttore : Sony File Size : 725.08 kb File Nome : Lingua di insegnamento:

• Make sure the colour system is set to the system that the tape was recorded in. • If you made connections using the aerial cable only, make sure the TV system is set correctly for your area. Playback The picture is not clear, or a message appears indicating that the video heads need cleaning. • The video heads are dirty (page 48). Clean the video heads using the Sony T-25CLD, T-25CLW or E-25CLDR video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). Do not use a commercially available liquid type cleaning cassette other than Sony's, as they may damage the video heads. • If a message appears, this indicates that the Head Condition Sensor has detected dirty video heads. Follow the on-screen message. For details about the Head Condition Sensor, see page 48. • The video heads may have to be replaced. Consult your local Sony service facility for more information. The picture rolls vertically during picture search. • Adjust the vertical hold control on the TV or monitor. The picture has no sound. • The tape is defective. • If you made A/V connections, check the audio cable connection. • If you made connections using the aerial cable only, make sure the TV system is set correctly for your area. 46 Additional Information Others I Timer recording I Recording Symptom Remedy Make sure the TV is set to the video channel. If you are using a monitor, set it to video input. Select the correct source with the INPUT SELECT or PROG +/- buttons. Select a programme position when recording TV programmes; select "L" when recording from other equipment. TV reception is poor. • Adjust the TV aerial. • Make sure SYSTEM (B/G, D/K or I) in the TUNER PRESET menu is set to the system in your area. The recorded picture has no • Set the PAL/MESECAM option in the SET UP MENU colour or unusual colour. according to your local colour system. The tape starts playing as soon • The safety tab has been removed. To record on this as it is inserted. tape, cover the tab hole. The tape is ejected when you • Check that the safety tab has not been removed. press Z REC. Nothing happens when you • Make sure the tape is not at its end. press Z REC. The timer does not operate. • Check that the clock is set. • Make sure a tape has been inserted. • Check that the safety tab has not been removed. • Make sure the tape is not at its end. • Make sure a programme has been set for timer recording. • Make sure your timer settings are past the current time. • The clock stops if the VCR is disconnected from the mains for more than eight hours (SLV-ED25PS/TH and ED15PS only) or 24 hours (SLV-ED33ME/MJ/SG only). Reset the clock and timer. A tape cannot be inserted. • Check that a tape is not already in the tape compartment. The remote commander does • Make sure you are pointing the remote commander at not function. the remote sensor on the VCR. • Replace all the batteries in the remote commander with new ones if they are weak. • Make sure the 1 TV I/I VIDEOI remote control switch is set correctly. The tracking meter does not • The recording condition of the tape is very poor and appear on the screen. tracking cannot be adjusted. The VCR needs to be cleaned. • Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. continued No TV programmes appear on the TV screen. Additional Information 47 Troubleshooting (continued) Symptoms caused by contaminated video heads • No picture (or black & white • Normal picture • Rough picture • Unclear picture screen appears) contamination Sapphire tape cleaner The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded. This cleaner can prevent the video heads from contamination by removing dust or mold from a tape with the sapphire edge. Head Condition Sensor The Head Condition Sensor checks the video heads condition. If the heads are dirty, a message will instruct you to insert a video head cleaning cassette. Be sure to use the Sony T-25CLD, T-25CLW or E-25CLDR video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). 48 Additional Information Specifications System Colour system PAL, MESECAM, NTSC 3.58, NTSC 4.43 TV system B/G, D/K, I Channel coverage B/G: VHF E2 to E12/UHF E21 to E69/ CATV S01 to S05, S1 to S41 D/K: VHF R1 to R12/UHF R21 to R69 I: VHF SA4 to SA13/UHF B21 to B69/ CATV S01 to S05, S1 to S41 RF output signal UHF channels 21 to 69 (B/G, D/K, I) Aerial out 75-ohm asymmetrical aerial socket Inputs and outputs LINE-1 IN VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (1) I...

Scarica la tua

Per scaricare, digitare 2 cifre :