|
Facilità d'uso
• The tape is defective. • If you made A/V connections, check the audio cable connection. • If you made connections using the aerial cable only, make sure the TV system is set correctly for your area. The sound is unstable or has an echo. (SLV-ED915PS/TH, • When you play a tape with the same sound recorded on both the hi-fi and normal sound tracks, make sure ED818ME/SG, ED817TH and ED815PS only) the AUDIO MIX option in the SET UP MENU is set to OFF. continued Additional Information 53 Troubleshooting (continued) Symptom Remedy A TV programme does not appear on the TV screen. • Make sure the TV is set to the video channel. If you are using a monitor, set it to video input. • Select the correct source with the INPUT SELECT or PROG +/– buttons. Select a programme position when recording TV programmes; select “L1”or “L2” (SLVED915PS/ TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS only) when recording from other equipment. Recording Others Timer recording TV reception is poor. • Adjust the TV aerial. • Make sure SYSTEM (B/G, D/K or I) in the TUNER PRESET menu is set to the system in your area. The recorded picture has no • Set the PAL/MESECAM option in the SET UP MENU colour or unusual colour. according to your local colour system. The tape starts playing as soon • The safety tab has been removed. To record on this as it is inserted. tape, cover the tab hole. The tape is ejected when you • Check that the safety tab has not been removed. press zREC. Nothing happens when you • Make sure the tape is not at its end. press zREC. The timer does not operate. • Check that the clock is set. • Make sure a tape has been inserted. • Check that the safety tab has not been removed. • Make sure the tape is not at its end. • Make sure a programme has been set for timer recording. • Make sure your timer settings are past the current time. • The clock stops if the VCR is disconnected from the mains for more than eight hours (for SLV-ED915PS/ TH, ED817TH, ED815PS and ED515PS only) and 24 hours (for SLV-ED818ME/SG and ED616ME/MJ/SG only). Reset the clock and timer. • Turn the power off and unplug the mains lead. A tape cannot be inserted. • Check that a tape is not already in the tape compartment. The remote commander does • Make sure you are pointing the remote commander at not function. the remote sensor on the VCR. • Replace all of the batteries in the remote commander with new ones if they are weak. • Make sure the TV/VIDEO remote control switch is set correctly. The tracking meter does not • The recording condition of the tape is very poor and appear on the screen. tracking cannot be adjusted. The VCR needs to be cleaned. • Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. Additional Information Symptoms caused by contaminated video heads • No picture (or black & white • Normal picture • Rough picture • Unclear picture screen appears) initial terminal contamination Sapphire tape cleaner The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded. This cleaner can prevent the video heads from contamination by removing dust or mold from a tape with its sapphire edge. Head Condition Sensor The Head Condition Sensor checks the condition of the video heads. If the heads are dirty, a message will instruct you to insert a video head cleaning cassette. The VCR may temporarily switch to a different head and resume playback. To switch the heads, press H PLAY while the “PUSH [PLAY] TO RESUME TEMPORARILY” message appears on the screen. Although playback will resume, the sound will be monaural. You may have to manually adjust the tracking to get a better picture (see “Adjusting the picture” on page 46). When playback is finished, be sure to clean the heads with a video head cleaning cassette. Be sure to use the Sony T-25CLD, T-25CLW or E-25CLDR video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). Additional Information Specifications System Colour system PAL, MESECAM, NTSC 3.58, NTSC 4.43 TV system B/G, D/K, I Channel coverage B/G: VHF E2 to E12/UHF E21 to E69/ CATV S01 to S05, S1 to S41 D/K: VHF R1 to R12/UHF R21 to R69 I: VHF SA4 to SA13/UHF B21 to B69/ CATV S01 to S05, S1 to S41 RF output signal UHF channels 21 to 69 (B/G, D/K, I) Aerial out 75-ohm asymmetrical aerial socket Inputs and outputs LINE-1 IN and LINE-2 IN (SLV-ED915PS/TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS only) VIDEO IN, phono jack (1 each) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2 each) Input level: 327 mVrms Input impedance: more than 47 kilohms LINE OUT VIDEO OUT, phono jack (1) Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO OUT, phono jack (2) Standard output: 327 mVrms Load impedance: 47 kilohms Output impeda...
Questo manuale è adatto anche per i modelli :VCR / lettori video - SLV-ED815PS (811.08 kb)
VCR / lettori video - SLV-ED817TH (811.06 kb)
VCR / lettori video - SLV-ED818ME (811.06 kb)