valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
•
• T
Multi-Brand Control Feature
Advanced Connections
•
Advanced Connections • Multi-Brand Contr
MTS Broadcast/VHS Hi-Fi Stereo System
Timer Recording Using VCR Plus+ System
MTS Br
Tape Operation
Tape Operation
a
pe Oper
VCR Plus+ System is ...
Multi-Brand Control Setup
Audio/Video connection
Connection
Playback
Playback
This feature sets most items of a Timer Recording when you enter a PlusCode programming
marks start and end points of
number found in TV GUIDE and selected newspaper TV listings.
The Remote Control can be set to control some TV and Cable box/DSS functions.
If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR
Make the Audio/Video Connection as shown on page 3.
oadcast •
marked recordings can be
helps you locate certain parts of
commercials within recordings over 15 minutes
To Search for Preview.
played back so that commercial blocks are
prerecorded movies (rented or purchased).
Initial Setup.....
long. The VCR automatically advances through
to them to receive higher quality picture and sound.
• You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.
The feature works in two ways.
You can override the operation of
1 Find your TV and Cable Box/DSS Receiver Brand Code Number from those shown below.
advanced through automatically or manually.
ation
To use VCR Plus+ system, clock and channels must be set (p. 4 of “Basic Operations” book).
marked commercials at high speed. Or, you may
• You can go to the beginning of the movie.
SEARCH FOR PREVIEWS
TV
set to manual. Because stations broadcast
VCR C / A CLOCK CH
2
Setup for TV control,
Channel Setup.....
Press ACTION
• You can skip from one preview to the next.
mode by pressing SEARCH/ M/A SKIP during
Equipped with
®-TV Noise
differently, the effectiveness of this feature may
1 REPEAT PLAY :OFF
Broadcast/ cable stations are assigned a VCR Plus+ (GUIDE CH) number. See the Channel
REMOTE WARNING :ON
to display MENU.
works only on tapes recorded in
tape searching.
works by
➛ hold down TV button,
VCR
Reduction for true MTS
vary. See bottom of page for answers to
AUTO SHUT- OFF :OFF
Listing (directory) page of TV GUIDE, etc. In the Channel Setup below, you will be entering your
IDIOMA/LANGUE : ENGLISH
SP speed with the record tab removed.
R
searching the tape past each preview and then
➛ enter code with NUMBER keys.
L
IN FROM ANT.
reproduction.
®-TV Noise
local channel number (RECEIVE CH) for each GUIDE CH number.
VHS Hi-F
commonly asked questions about this feature.
VCR’ S OUTPUT CH :3
Setup for Cable or DSS control,
VCR
Stereo Amplifier
AUDIO OUT
Reduction is required for good
Example : if NBC’s assigned GUIDE CH were 05, and your TV received NBC on channel 04, you
SELECT :
1 Insert a tape without record tab.
reversing back to the start of the detected
preview. While the tape is reversing back, if
➛ hold down DSS/CABLE button,
R
R
would enter 04 across from GUIDE CH 05 in step 3 of “VCR Plus+ System Channel Setup”.
Marking
EXIT : ACT I ON
TV
L
stereo separation and audio
2 SEARCH
Press SEARCH/ M/A
INDEX PROG. END MOVIE
SEARCH/ M/A SKIP is pressed,
➛ enter code with number keys.
SKIP to display
will begin searching for the
VCR C / A CLOCK CH
ENTER INDEX NUMBER :1
VHF/UHF
fidelity.
® is a registered
With C/A RECORD: ON, the VCR auto rewinds
Press to select C/A
USING 1- 9 KEYS
• If code number is 100 or greater,
AUDIO OUT
AUDIO IN
SET UP COMMERCIAL ADV.
SEARCH.
R
2
next preview. While searching for the next
VCR Plus+ System Channel Setup
VCR Plus+ System Programming
after a recording is made and marks start and end
C/A RECORD :ON
and display SET UP
R
R
L
trademark, and is licensed by
C/A PLAYBACK :AUTO
FORWARD SEARCH :FF
preview, if you see the start of a preview which
➛ press 100 key, then other digits. E.g., press 100 - 0 - 2 for 102.
AUDIO IN
L
OUT TO TV
®
R
Technology Licensing.
For [VCR-TV] or [VCR-cable box-TV] connection only.
Press PROG/VCR+ button to display PROGRAM.
i Ster
COMMERCIAL ADV.
REVERSE SEARCH :REW
points of all detected commercial blocks.
NEXT :SEARCH M/A SK I P
you wish to watch, press SEARCH/ M/A SKIP
3 Confirm code entry,
VHF/UHF
After marking, the tape is returned to end of
EXIT :STOP
1
OUT TO TV
L
and
will immediately reverse
You’ll need a local TV channel listing (e.g. TV
VCR Plus+ PROG. LIST
recording. Commercials are not erased.
Press to select
SELECT :
➛ press POWER to turn your TV on or off.
EXIT : ACT I ON
2
GUIDE) which includes the assigned VCR Plus+
ENTER PLUSCODE NUMBER
display VCR Plus+
VCR C / A CLOCK CH
Press ACTION*
3 SEARCH
Press SEARCH/ M/A
back to the start of that preview, instead of
INDEX PROG. END MOVIE
• See table below for controllable functions in each mode.
VIDEO OUT
numbers.
-
screen.
eo System •
SKIP twice to select
REPEAT PLAY :OFF
searching further past the preview start point.
1
GO TO START MOVIE
REMOTE WARNING :ON
to display MENU.
VCR C / A CLOCK CH
Press
to select C/A
GO TO PREVIEW
MOVIE and press
AUTO SHUT- OFF :OFF
SET UP COMMERCIAL ADV.
Once the VCR is playing a preview, press
Receivable Broadcast Types
• Repeat setup after remote battery replacement.
VCR C / A CLOCK CHANNEL
USING 0 - 9 KEYS
IDIOMA/LANGUE : ENGLISH
3
Notes
Press ACTION
C/A RECORD :ON
PLAYBACK and press
SEARCH START : FF
to select GO TO
ANTENNA : CABLE
VCR’ S OUTPUT CH :3
C/A PLAYBACK :AUTO
• Remote will not control every TV, cable box, or DSS made by the manufacturer listed.
1
SEARCH/ M/A SKIP to advance to the next
SELECT :
AUTO SET
to display menu, and
to set “AUTO” or
START MOVIE or GO
The following are possible audio broadcast types and on-screen displays.
WEAK SIGNAL DISPLAY : OFF
preview, long commercial or the start of the
EXIT : SEARCH M/A SK I P
If you get no response, your particular unit cannot be controlled. There are NO
VIDEO IN
CABLE/DSS BOX SET UP
Press
VCR Plus+ PROG. LIST
Press NUMBER keys
SELECT :
“MANUAL”.
TO PREVIEW.
The signal being received is indicated with an “ ” mark while the selected audio mode is
additional codes for the products listed. If your product is not listed, then the remote is
3
VCR Plus+ CH SET UP
EXIT : ACT I ON
movie (whichever is next).
to select CHANNEL.
ENTER PLUSCODE NUMBER
to enter PlusCode
SELECT : SET :
Select “GO TO START MOVIE,” if you want to
indicated with an arrow.
not compatible with that product.
1
number and press
VCR C / A CLOCK CH
SELECT :
Press to select
EXIT : ACT I ON
To display the broadcast signal being received,
2
EXIT : ACT I ON
SET UP COMMERCIAL ADV.
advance directly to beginning of the movie.
PROG/VCR+ button
C/A RECORD :ON
C/A and display SET UP
1 Start preview searching.
ol F
• If the PlusCode
to set.
➛ press DISPLAY*.
T
C/A PLAYBACK :AUTO
➛ continue with step 4.
COMMERCIAL ADV.
AUTO : VCR will automatically advance through
1) In step 3 at left, select Go To PREVIEW.
Using Multi-Brand Control
2 VCR C / A CLOCK CHANNEL Press
number entered
ANTENNA : CABLE
To Make Corrections,
imer Recording Using
marked commercial blocks recorded on
Select “GO TO PREVIEW,” if you want to view
e
AUTO SET
to select VCR Plus+ CH
begins with “0,” skip
MTS Stereo and SAP broadcast
STOP 1 2 : 0 0AM
CH 02
the tape and then resume playback.
the first (next) preview.
2) Press FF.
After remote is set up, you can select VCR, TV, or DSS/CABLE for the desired function.
atur
WEAK SIGNAL DISPLAY : OFF
press repeatedly
SELECT :
0 : 0 0 : 0 0
to step 5. Display in
CABLE/DSS BOX SET UP
SET UP, and press to
EXIT : ACT I ON
STEREO
SP
to delete number, then
➛ go to “To Search for Preview” at right.
VCR Plus+ CH SET UP
• If you want to playback, press PLAY.
Multi-channel Television Sound Stereo (main language)
step 4 will not appear.
MANUAL : VCR will advance through
Press VCR, or TV, or DSS/CABLE on the remote.
SAP
set.
repeat step 3.
VCR C / A CLOCK CH
and Secondary Audio Program (sub language)
MONO
Press
to select C/A
(Table below shows available unit buttons for each mode.)
SELECT : SET :
Connect the VCR’s VIDEO OUT jack to the TV’s VIDEO IN jack.
VCR Plus+ PROG. LIST
3
commercials only when CA/ZERO is
SET UP COMMERCIAL ADV.
4 SEARCH
Press FF to start
e
INDEX PROG. END MOVIE
When a preview is detected, VCR
searching.
Unit
1
EXIT : ACT I ON
Press
to select
C/A RECORD :ON
broadcasts are being received simultaneously.
RECORD and press
pressed. Playback will resume when
SEARCHING FOR START
4
C/A PLAYBACK :AUTO
will start playback.
OF MOVIE
ONCE
ONCE, DAILY
VCR
TV
CABLE/ DSS
Select STEREO or SAP audio mode.
to set “ON” or “OFF”.
the end mark of a commercial block is
Mode
DAILY(MON-FRI)
• To cancel, press
VCR C / A CLOCK CHANNEL
Press to move cursor
WEEKLY
(MON~FRI), or WEEKLY
found, or a new recording or blank
3
STOP.
VCR
All
VOL UP/DOWN
GUIDE CH RECEIVE CH
to right, press
to
record frequency and
Start next preview searching.
SELECT : SET :
portion is detected, or after 8 minutes.
01 --
CANCEL : STOP
2
press PROG/VCR+
EXIT : ACT I ON
02 --
enter number, press
VCR/TV, PLAY, STOP,
POWER, INPUT, number
SELECT :
MTS Stereo broadcast
STOP 1 2 : 0 0AM
CH 02
Press SEARCH/ M/A SKIP.
Connect VCR’s L/R AUDIO OUT jacks to the TV’s L/R AUDIO IN jacks.
03 --
TV
EJECT, SAP/ Hi-Fi, DISPLAY,
keys, ENTER, CH UP/
2
0 : 0 0 : 0 0
to set, press
to
END : PROG
button to set.
When the movie is found...
ON: Timer recording, VCR Plus+ System, and One
Multi-channel Television Sound Stereo broadcast.
STEREO
SP
4 Press ACTION again to return to normal screen.
• To cancel, press STOP.
scroll up/down.
FF, REW, PAUSE/SLOW,
DOWN, VOL UP/DOWN
SAP
VCR Plus+ PROG. LIST
Press
to change
Touch recordings are marked automatically.
Select STEREO audio mode.
MONO
5 DATE START STOP CH
5 SEARCH
Press PLAY to start
INDEX PROG. END MOVIE
playback.
REC, SPEED, CA/ZERO,
VCR C / A CLOCK CHANNEL
• Repeat step 3 until list
record speed and
THE VCR IS WAITING TO
POWER, ENTER, NUMBER
• When timer is used to
THE MOV I E I S READY
CABLE/
13 SAT 2:20P 3:20P 02
MARK COMMERCIALS IN THE
COUNTER RESET, TAPE
• If stereo broadcast is weak and display flickers, select
GUIDE CH RECEIVE CH
is complete.
TODAY
press to set.
VOL UP/DOWN
PROGRAM YOU RECORDED.
record two consecutive
Notes
keys (except 100key),
SLP
• To cancel, press
DSS
POSITION
Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”
MONO audio mode for possibly better results.
01 --
02 --
• Leave line blank if
CH UP/ DOWN
SELECT RECORD SPEED
Press PROG/VCR+
3
03 --
VCR Plus+ System •
START : PLAY
shows (same channel),
• The mode set in step 3 remains unless a
STOP.
station is not received
SELECT :
SET:
greater accuracy can be
button to end program.
MARKING
END : PROG
power outage occurs in which case the factory
CANCEL : STOP
• Not all functions listed may be controllable.
CLEAR : ADD/DLT
NOW : PRESS 1
Notes
or if GUIDE and
obtained by programming
SELECT : SET:
LATER : PRESS 2
setting will be restored.
• In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing
SAP broadcast
STOP 1 2 : 0 0AM
CH 02
EXIT : ACT I ON
CANCEL : PRESS ACTION
RECEIVE CHs are the
VCR Plus+ PROG. LIST
Press PROG/VCR+
each show separately.
NUMBER keys for channel selection.
Secondary Audio Program (sub language) broadcast.
0 : 0 0 : 0 0
STEREO
SP
6 DT START STOP CH SPD
• If playback is started in the middle of a
same.
13 2 : 00 P 3 : 20P 02 SLP
button again to exit.
Search System
When STOP is pressed during normal recording,
SAP
-- -- : -- -- : -- -- --
commercial, only a single commercial is
Select SAP audio mode for the sub language.
To Make Corrections,
MONO
-- -- : -- -- : -- -- --
• Press ADD/DLT
For each recording, an invisible index mark is placed on the tape. A program index and
press :
-- -- : -- -- : -- -- --
shown, or a single commercial is longer than 1
TV Brand Code Numbers
press
and to move to error, then
to
to delete the program.
information are also included for timer recordings. These marks are used to access or
CANCEL : ADD / DLT
a) 1 key (NOW)
change, or ADD/DLT to erase number.
➛ to mark now.
minute, a commercial may not be skipped.
Panasonic ....................... 01, 02
Sylvania ................................ 05
JVC ....................................... 11
SELECT : SET :
“NOW MARKING COMMERCIALS” appears.
EXIT : PROG
Press FF to quickly advance through the
scan recordings.
Quasar ............................ 01, 02
Sharp .............................. 06, 07
Hitachi ................................... 12
I With a Cable Box (VCR Cable Box)
RCA ...................................... 03
b) 2 key (LATER)
Sony ...................................... 08
Mitsubishi ........................ 07, 13
You Can
You Cannot
4 Press ACTION twice to end setup.
➛ to mark after power is
commercial.
Press POWER off to set timer recording.
Index Search
Program End Search
GE ......................................... 03
Toshiba ................................. 09
Samsung ............................... 14
turned off. (If tape is rewound and another
7
• Part of a recorded program may be skipped
Zenith .................................... 04
Sanyo .................................... 10
Gold Star ................... 15, 16, 17
TV
• view any
• record
MONO broadcast
STOP 1 2 : 0 0AM
CH 02
(“TIMER” lights on Multi Function Display.)
recording is started before power is turned off,
0 : 0 0 : 0 0
over if the program portion between
Magnavox ............................. 05
Fisher .................................... 10
ANT
(including
scrambled
IN FROM ANT.
AUDIO
Normal monaural sound broadcast.
Do normal Timer Record if...
STEREO
SP
correct marking may not occur.
1 SEARCH
Press SEARCH/ M/A
Locates end point of recording for continuity.
INDEX PROG. END MOVIE
commercials is less than one minute or there
SKIP to display
IN OUT
SAP
Notes
ENTER INDEX NUMBER :1
R
scrambled)
channels.
• PlusCode number is not listed for program.
c) ACTION (CANCEL)
or
MONO
➛ marking is canceled.
are frequent dark and quiet scenes in the
1 Press SEARCH/ M/A SKIP twice to
USING 1- 9 KEYS
SEARCH in Stop or Play
R
Cable Box Brand Code Numbers
channel.
• program (e.g. sports event) may run over set stop time.
CABLE BOX
AUDIO
• Do not overlap program times.
T
display SEARCH in Stop or Play mode.
CATV
L
L
VHF/UHF
• See “Important for DSS/Cable Box Users” left.
a
FORWARD SEARCH :FF
program. To correct, press PLAY during the
mode, and then press
OFF : The VCR will not mark commercials.
REVERSE SEARCH :REW
Archer ............................... 05, 06, 01, 44, 63, 91, 126
Quest ............................................................... 05, 06
VIDEO
See page 6 of “Basic Operations” book to:
OUT TO TV
IN OUT
VIDEO
pe Operation
NEXT :SEARCH M/A SK I P
skip, rewind tape to just prior to where skipping
NUMBER keys to select
SEARCH
Press FF on the
Select when editing or dubbing a tape, or
EXIT :STOP
Cabletenna ................................... 01, 44, 63, 91, 126
Radio Shack ................................. 51, 44, 59, 75, 126
• use VCR
• cancel a timer recording in progress.
• Make each entry within 1 minute or VCR
2
started, then press PLAY again for normal
recording number.
INDEX PROG. END MOVIE
remote to start
VHF/UHF
when opting not to use this feature.
Cableview ................. 63, 44, 42, 30, 52, 04, 124, 126
RCA ................................................... 16, 17, 97, 109
IN 1 OUT
Remote
• review, replace, or clear program contents.
exits setup.
playback. When the end of the commercials is
• To calculate number,
PROGRAM END
Century ......................................... 51, 44, 59, 75, 126
Realistic ........................................ 51, 44, 59, 75, 126
Control to
• Once VCR Plus+ channel setup is done,
Press ACTION again to return to normal screen.
Citizen ...................... 63, 44, 42, 30, 52, 04, 124, 126
Recoton ........................................ 51, 44, 59, 75, 126
Important for DSS/Cable Box Users
4
detected, auto advance will resume.
see below.
SEARCH START :FF
SEARCH.
VCR
select
channels stay in memory. If there’s a power
Curtis .............................................. 08, 09, 61, 53, 87
Regal ............ 14, 15, 28, 41, 102, 103, 104, 108, 130
• When recording via DSS, the receiver must be
Press FF or REW on
NEXT :SEARCH M/A SK I P
• To cancel, press
channels
Audio Mode for Recording
Audio Mode for Playback
outage, channel setup may be lost. Please
Regency ........................................................ 28, 130
The most commonly asked questions about
are answered below.
Diamond ....................................... 01, 44, 63, 91, 126
left on. When recording via cable or antenna,
the remote to start
EXIT :STOP
STOP or PLAY.
Drake ..................................................................... 67
Rembrandt ........................ 01, 32, 39, 42, 44, 63, 126
without using
do channel setup again.
DSS receiver must be off.
Question
Answer
search.
Eagle .......................... 13, 22, 58, 62, 20, 40, 26, 107
Salora .................................................................... 68
Multi-brand
• Obtain unlisted PlusCode numbers by
Eastern .......................................................... 28, 130
Samsung ........................................ 05, 32, 40, 42, 06
1 Start playback.
Examples of Program End Search.
1 Press SAP/ Hi-Fi to display audio mode.
• When recording via a cable box, leave box on
How fast does the VCR advance through
The VCR advances through a 3-minute commercial block in about 8 to 12
control feature.
calling 1 - 900 - 454 - 7587. Call costs about
GC Brand ................. 63, 44, 42, 30, 52, 04, 124, 126
Scientific Atlanta ............................. 08, 09, 61, 53, 87
and tuned to channel to be recorded.
See p. 5 of “Basic Operations”
commercials?
seconds if the tape speed is SLP. In SP, it takes about 25 to 35 seconds.
2 INDEX SEARCH
Play begins at search
(Display disappears after 5 seconds.)
end. To search forward
$.95 per minute.
Fig. 1
Gemini ........................................................... 04, 124
Sheritech ............................................................... 27
Instruction book.
Are commercials advanced through only when I Yes. The commercials are not marked until after the recording is
or back 1 index, press
INDEX
General Electric ............................................... 57, 01
Signal ............................................................ 26, 112
General Instruments .. 01, 02, 03, 04, 34, 55, 83, 106,
SL Marx ................ 32, 40, 42, 06, 43, 44, 52, 63, 126
I Connect With Two Cable Boxes
playback a recording?
finished.
FF or REW on the
Program 1
Program 2 or BLANK
You Can
You Cannot
Press SAP/ Hi-Fi
Sprucer ............................................... 16, 17, 97, 109
2
65, 67, 68, 115, 117, 118, 124, 91
FORWARD SEARCH :FF
Tape Operation
remote or VCR while
the current tape position
Press SEARCH button
STEREO
repeatedly to select
Are commercials still recorded on the tape in
Yes. By setting the C/A PLAYBACK to MANUAL, see top of this
REVERSE SEARCH :REW
Hamlin .......... 14, 15, 28, 41, 102, 103, 104, 108, 130
Standard Components .................. 32, 39, 42, 44, 126
VCR
2 Press SAP/ Hi-Fi to display audio mode.
• record and view • view channel
SAP
page, you can view or advance through commercials as desired.
screen left is displayed
End Point
case I choose to view them sometime?
FF
Hitachi ................................................................... 31
Stargate .. 32, 40, 63, 44, 42, 30, 52, 04, 06, 124, 126
desired mode.
MONO
(Display disappears after 5 seconds.)
both scrambled
other than
Repeat Play
Zero Search
(10 sec.).
Jasco ............................................................. 04, 124
Sylvania ................................................................. 19
IN FROM ANT.
CABLE BOX
AUDIO
Does
work in all recording
Yes.
works in SP, LP, and SLP.
Fig. 2
the one
• Refer to “Receivable
Jerrold ....................... 01, 02, 03, 04, 34, 55, 83, 106,
Teknika .................................................................. 74
and
• To cancel, press
R
speeds?
INDEX
INDEX
65, 67, 68, 115, 117, 118, 124, 91
Telecaption .................................................... 77, 127
selected for
Broadcast Types”
Press SAP/ Hi-Fi
Set to playback a recording over and over.
To quickly return to a specified tape location.
unscrambled
IN OUT
3
STOP or PLAY.
Program 1
BLANK
Program 2
BLANK
Macom .................................................................. 31
Teleview ............................................... 32, 40, 42, 06
L VHF/UHF
any type of
above.
channels if
repeatedly to select
Does the VCR advance through commercials
Yes. As long as C/A PLAYBACK is set to AUTO, see top of this page,
H I F I : L / R
the current tape position
VIDEO
Magnavox ...................................................... 26, 112
Texscan ........................................................... 18, 19
OUT TO TV
H I F I : L
recording.
1 Press ACTION to display menu.
Press DISPLAY during play to display
additional
desired mode.
1
each time I playback tapes which were
the VCR should advance through commercials each time the tape is
Matsushita .......................................... 16, 17, 97, 109
Tocom ...................................... 33, 34, 01, 42, 66, 91
H I F I : R
To Calculate Index Number
Press SEARCH button
Counter.
recorded using
?
played back.
FF
• Arrow indicates selection.
equipment is
NORMAL
End Point
Movietime ......................... 32, 39, 42, 44, 126, 38, 40
Toshiba ................................................................. 36
IN 1 OUT
TV
• Select “HIFI(L/R)”
VCR C / A CLOCK CH
Press
to select
Example 1:
NEC .......................................................... 38, 40, 32
Uniden Satelite ...................................................... 65
ANT
added.
• do a Timer
2 REPEAT PLAY :OFF
PLAY 1 2 : 0 0AM
Press RESET
After marking commercials, does the VCR stop at The tape stops at the end of the recording so that any additional
Fig. 3
or “HIFI(L)” or
REMOTE WARNING :ON
NOVAVISION ................................. 08, 09, 61, 53, 87
Unika ............................................ 01, 44, 63, 91, 126
A/B Switch
IN OUT
REPEAT PLAY and
recording of
2
0 : 0 0 : 0 0
the end of the tape, or rewind to the beginning?
timer recordings can be performed.
To go to rec. 2 from rec. 4, enter 3 and press REW.
the current tape position
Press SEARCH button
This connection
AUTO SHUT- OFF :OFF
SP
or
3 Do a recording.
COUNTER at desired
INDEX
NSC .......................................................... 38, 40, 32
Universal ................................ 42, 43, 44, 52, 63, 126
2-Way Splitter
R
“HIFI(R)” to listen to
IDIOMA/LANGUE : ENGLISH
press to set ON or
CABLE BOX
AUDIO
requires: two
a channel
VCR’ S OUTPUT CH :3
Program 1
BLANK
Program 2
position to reset to
Oak ........................................................... 46, 11, 129
Videoway ............................................ 07, 23, 50, 129
See p. 5 of “Basic Operations”
Can I play my
recordings in
Yes.
marked recordings will play in non-
stereo recordings in
CATV
L
unless you
OFF.
converter
Oak Sigma ............................................... 46, 11, 129
Vid Tech ................................................................ 64
• Arrow indicates
“0:00:00”.
non-
VCRs?
VCRs, but commercials will not be advanced through.
1
2
3
4
5
6
7
IN 1
IN 2
OUT 1
IN OUT
VIDEO
Instruction book.
stereo sound.
SELECT : SET :
OUT 2
select it at
ON : Play repeats at tape end
Vidtek .................................................................... 64
boxes, an A/B
If search
Panasonic .......................................... 16, 17, 97, 109
EXIT : ACT I ON
FF
selection.
Select “NORMAL”
VHF/UHF
Philips ....................... 07, 13, 20, 23, 24, 50, 128, 129
Viewstar ..................... 13, 22, 58, 62, 20, 40, 26, 107
the cable
or if unrecorded portion
Does the marking process interfere with other
No. If the interval between 2 or more timer programs is not sufficient
switch, and a 2-
Example 2:
End Point
exceeds a few
for monaural sound.
programmed recordings?
to mark the recording, marking will be done after all recordings are
over 30 sec. is detected.
Pioneer ............................................................ 05, 06
Zenith ................................................. 07, 23, 50, 129
way splitter.
box.
complete and the power goes off.
To go to rec. 6 from rec. 2, enter 4 and press FF.
seconds in
Notes
Pulsar ....................... 63, 44, 42, 30, 52, 04, 124, 126
3 Continue to record, playback, etc.
BLANK area.
What happens if I cancel the marking in
Marking will be resumed when the VCR's power is turned off as
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes
3 Press ACTION to return to normal screen.
progress so I can use the VCR?
long as the tape has not been ejected.
1
2
3
4
5
6
7
Upon locating end point,
will playback in monaural sound.
DSS Brand Code Numbers
4 Press STOP.
• To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV
What if part of my program is advanced through Please see the 3rd note on top of this page.
➛ search continues 7 sec. past end point,
Toshiba ................................................................. 92
Panasonic ............................................................ 96
REW 1 2 : 3 0AM CH 02
Press CA/ZERO in
NOTE: indicates start points of each recording.
or an external stereo amp and speakers. (See top of this page.)
along with the commercials?
Hitachi/ Hughes .................................................... 93
RCA ..................................................................... 97
5
0 : 30 : 30
➛ tape rewinds to 10 sec. before end point,
SP
Stop mode to start
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
Note
Magnavox/ Uniden 1 ............................................. 94
Sony ............................................................. 98, 105
Additional Notes:
➛ tape plays to end point and stops.
ZERO SEARCH.
Magnavox/ Uniden 2 ............................................. 95
• Hi-Fi and normal audio playback volume level may differ.
• Because of the various ways in which commercials are broadcast, the VCR may not be able to recognize all
• If Index Search is started very close to an
• Unit will go into FF
commercials.
Notes
index mark, that index mark may not be
or REW mode and
• If a timer recording is scheduled for the middle of the night, please be aware that the VCR will make some noise
STOP 1 2 : 3 1AM CH 02
as it rewinds and fast forwards the tape while marking commercials.
counted in the search.
• If Program End Search is started very close
0 : 0 0 : 0 0
• Due to changes in infra-red commands used by manufacturers, some brands have
stop at the last point
Important
*Important: If a remote control button does not work when pressed,
SP
the Counter was set
*Important:
to an index mark, that mark may be skipped
several codes. If your unit does not respond to the first code, please try the next one.
and
are registered trademarks of SRT, Inc.
Notes
press the VCR button on the remote and try the button again.
to 0:00:00.
A Jerry lggulden invention licensed in association with Arthur D. Little Enterprises, Inc.
If a remote control button does not work when pressed,
over.
• Some TV, Cable Box and DSS Box brands require you to turn on the power manually.
U.S.Pat. No. 5,333,091; 5,692,093; 5,696,866 other patents pending
press the VCR button on the remote and try the button again.
• To cancel, press PLAY or STOP.
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
V4612S Advanced-2 (02-5-10) 2nd.p65
3
2002/05/10, 12:37
LSQT0579B(Advanced Operations) - Back
... Questo manuale è adatto anche per i modelli :
VCR / lettori video - PVV4612S (4.54 mb)