Log:
valutazioni - 3, GPA: 4.3 ( )

Istruzioni per l'uso EverFocus, Modello ECOR264-4X1

Produttore : EverFocus
File Size : 3.47 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


“X” only HIDES the PTZ control panel. “EXIT “ closes the panel and exits PTZ mode!! Other controls will not respond until you EXIT the PTZ mode!! 26 3.7 LAYOUT The ECOR264 DVR has several display modes available, depending on the number of cameras the DVR supports. The different available layouts for a 16 camera model are shown below: NOTE: PIP display is not available in Playback mode The first three layouts are available on all models; the next three (6, 8 and 9 cameras) are available on the 9 and 16 camera models; the 10, 13 and 16 camera screens only on the 16 camera model. To change layout, follow the steps below: By mouse: Right-click to bring up the menu bar and click then click on the desired layout choice. By front panel: Push the “View” button on the front of the DVR to scroll through each display format. 3.7.1 Bring a camera to full screen mode By mouse: Double left-click on the selected channel to put that camera in full screen mode. By front panel: Press any channel key to bring that channel to full screen mode. With a mouse, double left-click again on the screen to return to the previous multiple camera layout. 3.8 CHANNEL SWITCHING Use this function to change a channel position within a multiple camera display 1. Select one camera . 2. Press Channel button 3. Click on the channel number you wish to select on the channel bar. The camera channel displayed in that position will be switched. EX: On a four camera screen, select camera1 and enter Channel menu and choose “2”, then camera 2 will show on position of camera 1, camera 1 will show on position of camera 2. If the new camera being selected is already displayed on screen, then the camera positions will be exchanged. If the new camera being selected does not already appear, it will replace the previously displayed camera. 27 3.9 DISPLAY Press the Display button on the menu by using the mouse or selecting this icon with the front panel keys and pressing ‘Enter’. Pressing/clicking cycles through the four OSD formats: 1. Press to show camera information. Please see the following table for camera information icons. Recording Playback Fast forward Fast backward Back pause Alarm Motion Video loss Express copy Audio out 3. Press again to show status information. Please see the following table for status representation. Alarm Audio Event HDD failure HD temp. too high Seq. Motion Video loss No network 4. Press again to show both status information and camera information. 5. Press again to hide all information. 3.10 SEQUENCE 1. By mouse: Click Sequence button to enter the auto sequential switching mode. 2. By front panel: Press the Sequence button on front panel to enter the auto sequential switching mode. 3.11 ZOOM 1. Make sure no camera is in playback mode 2. Select one camera 28 3. Right-click to bring up the menu bar and click button. Or, press the ZOOM button on the front panel. 4. When in ZOOM mode, the mouse cursor will change to a different icon in different areas of the screen. Or, use the arrow keys to bring a different portion of the magnified image into view. Users can control the portion of the magnified image to be displayed by clicking directly on screen: Figure 3-4 Zoom Express Control The screen is divided into a 4x4 grid. The function of each section is defined as below: • 1: Left and up • 2, 3: Up • 4: Right and up • 5, 9: Left • 8,12: Right • 13: Left and down • 14, 15: Down • 16: Right and down • 6, 7, 10, 11: Not used 29 3.12 SEARCH By mouse: Right-click to bring up the menu bar and click to enter Search Menu. By front panel: Press ”Search” key to enter Search Menu directly. 3.12.1 Time Search Figure 3-5 Search Menu – Time Search Play From: Select the time to begin the search by choosing the Date and Time. Click on the “Play” button to start the search. The DVR will automatically begin to play the video selected. The DVR will play the nearest time if there is no data at the selected time. In search playback mode, pressing the “Stop” button will return to the search menu. 30 3.12.2 Event Search Figure 3-6 Search Menu – Event Search From: Select starting date and time To: Select ending date and time. Camera: Select which cameras to include in the search. Event: Select which event type(s) to search for. Choose from Alarm, Motion or Video Loss. Click on the “Search” button to start searching. The search results will be shown as a list of events. 31 Prev Page: Go to previous page Next Page: Go to next page Play: Playback selected item Copy: Copy selected item 3.12.3 Smart Search Smart Search allows the review of a segment of the recorded video from individual cameras to detect motion in an area specified at the time of the search. The resulting ‘motion events’ are displayed in the form of an Event List. Figure 3-7 Search Menu – Smart Search From Date: Select starting date. Time: Select starting time. To Date: Select ending date. Time: Select ending time. 32 Camera: Select which cameras to review. Grid Setting: Press Grid Setting butto...

Questo manuale è adatto anche per i modelli :
Video - ECOR264-16X1 (3.47 mb)
Video - ECOR264-9X1 (3.47 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie