valutazioni - 5, GPA: 4.4
(
)
)
|
Facilità d'uso
"ACK" will appear on the monitor. To reset the alarm, press the RESET button after acknowledging the alarm. "ACK" will go out. SUSPEND: To suspend an activated alarm, press this button while holding down the SHIFT button. "ALM SUSPENDED" will appear on the monitor. To cancel the suspension, press this button while holding down the SHIFT button again. $0 Function 1 button (F1/CAM SETUP) Press this button while holding down the SHIFT button to open the camera's SETUP MENU on the active monitor. The function as the F1 button is reserved for future use. $1 Tour Sequence button (TOUR SEQ) Press this button, in combination with the numeric buttons, to run a tour sequence on the active monitor. $2 Group Sequence button (GROUP SEQ) Press this button to select a group sequence. To select a group, press the corresponding numeric buttons, followed by the GROUP SEQ button. $3 Function 2 button (F2/INDEX) Displays date and time entry form during the recorder mode. $4 Next button (NEXT) %2 Setup button (SETUP) Moves a tour sequence one step forward from the step To display the unit's SETUP MENU, press this button previously paused on the active monitor. while holding down the SHIFT button. Also selects a camera. If the active monitor is in the * The playback of the recorded images is possible when spot mode, press NEXT while holding down the CAM a recorder is connected. (SET) button, to replace the currently selected camera with the next higher-numbered camera. During the recorder mode, this button moves the playback image one step forward. $5 Previous button (PREV) Moves a tour sequence one step backward from the step previously paused on the active monitor. Also selects a camera. If the active monitor is in spot mode, press PREV while holding down the CAM (SET) button, to replace the currently selected camera with the next lower-numbered camera. During the recorder mode, this button moves the playback image one step forward. $6 Recorder button (RECORDER) To enter the recorder mode, press this button. (Refer to p. 116.) Note: Only one operator can enter the recorder mode at one time. $7 Pause button (PAUSE) Pauses a tour sequence, and the playback of the recorded images* that is being run on the active monitor. Also restarts the sequence from the next step forward, or the playback of the recorded images*. $8 Play button (PLAY) Starts the playback of the recorded images*. $9 Stop button (STOP) Ends a tour sequence, or stops the playback of the recorded images* that is being run on the active monitor. %0 Shift button (SHIFT) To activate the alternate function of each button, press this button, in combination with buttons associated with special functions. %1 On-screen Display button (OSD) In combination with the numeric buttons, this button toggles the currently selected display items on the active monitor. 1: Clock display (T&D) 2: Camera title display (CAM ID) 3: Event display (EVENT) 4: Monitor status display (MON STATUS) 5: All displays (ALL) 7: ALARM HISTORY table (ALM H) 8: VIDEO LOSS STATUS table (VLD H) 9: SYSTEM STATUS table (SYS S) ¦ WV-CU360CJ System Controller (TERMINAL MODE) A template, on which “For Matrix Switcher (WJ-SX150)” is written, is provided with System Controller WV-CU360CJ. When using the template, place it on the surface of the controller. %3 %4 %5 %6%7%8 %9 ^0 ^1 & & & & & & * * * %3 Operation indicator (OPERATE) Lights up when the controller's power is turned on. %4 Link indicator (LINK) Lights up when communication is established with the matrix switcher. %5 Alarm indicator (ALARM) Lights up when an alarm condition exists. %6 Monitor indicator (MONITOR) Lights up when the monitor number appears on the LED display. %7 LED Display Displays the monitor number, camera number, numeric entry and error status, etc. %8 Camera indicator (CAMERA) Lights up when the camera number appears on the LED display. SETUP SHIFT REW/FF STEP FOCUS OPERATE LINK ALARM BUSY PROHIBITED CALL PRESET PROGRAM PRESET OPEN FAR TELE GROUP SEQ PAUSE SUSPEND F1 CAM SETUP ALL RESET ACK RESET F2 TOUR SEQ PREV NEXT STOP OSD AUTO MONITOR CAMERA For Matrix Switcher (WJ-SX150) WV-CUCJ360System Controller RECORDER INDEX STOP PLAY PAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFF MON (ESC) T&D CAM ID MON STATUS ALL EVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFF EL-ZOOM AUX1 ON AUX1 OFF STILL 3 4 4 *7 *3 *6 ^3&0&1&2*5*2 ^8^9 ^7 ^6 ^5^4 5 6 8 7 1 0 &9 ^2 %9 Busy indicator (BUSY) Lights up when the higher-priority operator selects the camera or monitor you are currently operating. Operations from the system controller are disabled until this indicator goes off. ^0 Prohibited indicator (PROHIBITED) Blinks when an operator attempts to control a monitor (or camera) that is already used by a higher-priority operator or the operator has done the prohibited operation. ^1 Zoom wheel controller This control is used for zooming cameras equipped with the specific lens. Moving the control to the right will zoom ...