valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
NTSC : When NTSC signal is inputted. PAL : When PAL signal is inputted. B/W : When black and white signal with 60 Hz/50 Hz field frequency is inputted in composite video input. During PC IN, the current signal being displayed is in the form “Horizontal Resolution . Vertical Resolution @ Field Frequency” on the latter part of the menu title based on the timing data list (on page 8). Note: • In case the frequency of connected PC is not included in the timing data list, the signal may not be displayed correctly. 2. Set each setting parameter. Presently selected line is the line being highlighted. Move to item down or up : Press • PIP or • POS button. Change and adjust the settings : Press -or + button. Store the settings : Settings are stored if menu button is pressed. It displays off the Video Adjustment Menu. Caution: • If power is cut off while setting, it will not store the settings that have changed. Setting of Composite Video / S-Video / Component Video Input 1. Display the Video Adjustment Menu. (Refer to page 15) VIDEO IN NTSC BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOR 0 TINT 0 VOLUME 0 H-POSITION 0 COLOR TEMP STANDARD SCAN FULL LANGUAGE ENGLISH NORMAL SETTINGS VIDEO IN PAL BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOUR 0 TINT - VOLUME 0 H-POSITION 0 COLOUR TEMP STANDARD SCAN FULL LANGUAGE ENGLISH NORMAL SETTINGS 2. Move the cursor to each setting parameter listed below with the • PIP or • POS button, then adjust the level of the selected item with the -or + button. Item Effect Indicator BRIGHT Darker Brighter CONTRAST Less More SHARPNESS Soft Sharp COLOR (PAL: COLOUR) Less More TINT (NTSC ONLY) Greenish Reddish VOLUME Decrease Inccrease H-POSITION Left Right Notes: • BRIGHT, CONTRAST, SHARPNESS, COLOR, and TINT can be set to different values for each input signal. • TINT applies for NTSC system only. 3. Move the cursor to the COLOR TEMP (NTSC) or COLOUR TEMP (PAL) parameters with the • PIP or • POS button, then select color temperature of display with -or + button. STANDARD : Pictures are displayed in normal color temperature. 9300K : Pictures are displayed in bluish color temperature. 6500K : Pictures are displayed in reddish color temperature. 4. Move the cursor to the SCAN parameter with the • PIP or • POS button, then select scanning area with -or + button. FULL : Vertical and horizontal picture size are equal to the display panel size. Picture aspect ratio is disregarded and the vertical size of picture is a little stretched. OVER : The vertical size of picture is fitted to the height of the display panel. Picture is cut on left and right sides for making the expansion ratio of both vertical and horizontal size into 1 : 1. UNDER : The horizontal size of picture is fitted to the width of the display panel. Black horizontal bar appears on top and bottom of the picture for making the expansion ratio of both vertical and horizontal into 1 : 1. 5. Move the cursor to the LANGUAGE parameter in the menu with the • PIP or • POS button, then select the desired language with the -or + button. Pressing the button repeatedly displays the language as shown below. 6. To reset the monitor to the default settings, move the cursor to the NORMAL SETTINGS with the • PIP or • POS button, then press the -or + button to restore the default settings. Onscreen display of NORMAL SETTINGS as shown below appears on the center of the screen when -or + button is pressed. Note: • During reset, setting parameters of Video Adjustment Menu only are being reset. NORMAL SETTINGS VIDEO IN NTSC BRIGHT -12 CONTRAST 8 SHARPNESS -16 COLOR -6 TINT -2 VOLUME -4 H-POSITION 3 COLOR TEMP 6500K SCAN FULL LANGUAGE ENGLISH NORMAL SETTINGS VIDEO IN NTSC BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOR 0 TINT 0 VOLUME 0 H-POSITION 0 COLOR TEMP STANDARD SCAN FULL LANGUAGE ENGLISH NORMAL SETTINGS 7. After setting the parameters, press the MENU button. Set values will be stored and the Video Adjustment Menu will exit. Caution: • If power is cut off while setting, it will not store the settings that have changed. Setting of PC Input 1. Display the Video Adjustment Menu. (Refer to page 15) PC IN 1280x1024@60Hz BRIGHT 0 CONTRAST 0 H-POSITION 0 V - POSITION 0 CLOCK 0 PHASE 0 COLOR TEMP USER COLOR USER COLOR R 20 USER COLOR G 20 USER COLOR B 20 OSD H-POSITION 0 OSD V-POSITION 0 VOLUME 0 LANGUAGE ENGLISH NORMAL SETTINGS 2. Set the BRIGHT, CONTRAST, VOLUME, and LANGUAGE parameters. Please refer to page 16 for the operation method. 3. Move the cursor to each setting parameter listed below with the • PIP or • POS button, then adjust the level of the selected item with the -or + button. 5. Move the cursor to either USER COLOR R, USER COLOR G, or USER COLOR B parameter in the menu with the • PIP or • POS button, then adjust the red, green, or blue color for color temperature. - : Decreases the red, green, or blue color. + : Increases the red, green, or blue color. 6. To reset the monitor to the default settings, move the cursor to the NORMAL SETTINGS with the • PIP or • POS button, t...