then secure the module into place with nylon tie straps. Step 8: Replace all panels In reverse order of removal. 225 Technology Way • Steubenville, Ohio 43952 800-878-8007
s work according to OEM requirements. Step 6: Plug In the Remote Starter/Alarm module to the T-harness. Step 7: Test all functions of the Remote Starter/Alarm module and then secure the module into place with nylon tie straps. Step 8: Replace all panels In reverse order of removal. 225 Technology Way • Steubenville, Ohio 43952 800-878-8007
ep 4: Route the T-harness so that It does not interfere with any moving functions of the vehicle. Step 5: Test all functions of the vehicle to make sure that all operations work according to OEM requirements. Step 6: Plug In the Remote Starter/Alarm module to the T-harness. Step 7: Test all functions of the Remote Starter/Alarm module and then secure the module into place with nylon tie straps. Step 8: Replace all panels In reverse order of removal. 225 Technology Way • Steubenville, Ohio 4
Select the vehicle make and model then print it out if possible as a reference guide. This chart will provide you with the information on what type of Anti-Theft Bypass module, relays or any other extra parts you may need before you begin your installation. We are available to answer your install questions and provide as much info online that is available. What your remote starter includes: Each remote starter comes packaged with an installation kit, an interactive install DVD and links to B
panel. Step 2: Locate the factory ignition harness located below the steering column and unplug. Step 3: Plug the T-harness In between the factory ignition harness. Step 4: Route the T-harness so that It does not interfere with any moving functions of the vehicle. Step 5: Test all functions of the vehicle to make sure that all operations work according to OEM requirements. Step 6: Plug In the Remote Starter/Alarm module to the T-harness. Step 7: Test all functions of the Remote Starter/Al
T-Harness Installation Models NIS-1 NIS-4 TOY-1 TOY-3 TOY-2 Step 1: Remove the trim panel below the steering column and knee bolster (if equipped) behind the trim panel. Step 2: Locate the factory ignition harness located below the steering column and unplug. Step 3: Plug the T-harness In between the factory ignition harness. Step 4: Route the T-harness so that It does not interfere with any moving functions of the vehicle. Step 5: Test all functions of the vehicle to make sure that
Clean the selected area with the cleaning wipes and let dry. 3. Apply the Bulldog strength glue to each security place and position on the desired object, continuing to hold in place for 30 seconds. Allow plates to dray for 24 hours. 4. Insert cable through each plate tunnel with large anchoring plate being last. 5. Finally, secure your system by attaching the padlock into the loophole cable ending. 11' 1 1-3 4 5