valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
¦ Keep children away from the appliance. Please monitor children to ensure that they do not play with the appliance. ¦ The mixer and the warm water pipe may be hot. ¦ Please switch off all fuses immediately with a malfunction. Immediately shut off the cold water supply to the appliance should it leak. The malfunction can only be repaired by a specialist or an authorised service agent. Your new appliance The electronic continuous-flow heater is intended exclusively for heating water which flows through the appliance. The continuous-flow heater switches on and heats the water when the warm water tap is opened. It switches off as soon as the tap is closed. Operating the continuous-flow heater The default temperature for the water temperature after the first start-up or a power failure is 40 °C. Selecting shower temperature Select the required temperature with the rotary knob used to vary the desired temperature from 20 °C to 60 °C in steps of 0.5 °C. The coloured display lighting indicates the temperature range during operation by means of blue or red hues. Info: The temperature shown in the display is the water temperature inside the appliance. The temperature of the water leaving the tap can vary from this due to heat losses in the pipework. 12 enen Desired temperature You may also simply select your personally programmed shower temperature at the touch of a button. You have two storage options. 1 2 Wellness program Desired temperature button 1 is preset to 40 °C, desired temperature button 2 is preset to 60 °C. ¦ Simply press the corresponding button and the set temperature and a thermometer appear on the display. Info: This setting remains active until a new setting is selected by pushing the button or turning the rotary knob. Changing the desired temperature The preset temperatures for button 1 (40 °C) or button 2 (60 °C) can be changed individually. ¦ Press desired temperature button 1 for at least 3 seconds, the temperature display will start to flash rapidly. ¦ Use the rotary knob to set the desired temperature between 20 °C and 60 °C. ¦ Keep desired temperature button 1 pressed for 3 seconds, the setting is stored. The temperature for desired temperature button 2 can be set in the same way as button 1. Two wellness programs can be set with the “exclusiv” continuous-flow heater. These wellness programs commence with a warm phase and conclude with a cold phase. The temperature stimulus associated with this can lead to stimulation of the circulation and enhance blood circulation. Consult you doctor if you are unsure concerning your personal suitability for the wellness programs (particularly with an existing illness) and the degree of application. 1x Starting wellness program 1 ¦Press the wellness program button once. The display lights up in colour, the stored shower temperature appears in °C and the symbol is displayed. ¦ Now turn on the tap within 2 minutes and wellness program 1 commences. At first, warm water whose temperature depends on ...
Questo manuale è adatto anche per i modelli :scaldabagno - DE1821555/02 (880.79 kb)
scaldabagno - DE1821555/03 (880.79 kb)
scaldabagno - DE2427555/01 (880.79 kb)
scaldabagno - DE2427555/02 (880.79 kb)