|
Facilità d'uso
The display will show the last selected fan speed used (HI HIHIHIHILO: HI: High fan speed, LO LOLOLOLOLow fan speed). You now have 5 seconds in which to make your new selection: 2X 5. Select the high or low fan speed by using the + +++++ or – ––––– keys. The selected fan speed will be shown on the digital display (HI HIHIHIHILO: Low fan HI: High fan speed, LO LOLOLOLOspeed). You can choose to collect the water from dehumidification in either the detachable water tank or an external container or drain. Please refer to the “Water drainage” chapter Attention! Attention!Attention!Attention!Attention!Attention! 1. The appliance will switch itself off automatically when it reaches the previously specified value, and switch on again if air humidity levels vary by approximately 10%. Therefore, do not become alarmed if the appliance switches itself off occasionally. 2. In order to ensure that the appliance operates correctly even at very low temperatures, the dehumidifier is equipped with an electronic frost sensor. This sensor switches the compressor off to prevent ice from forming inside the appliance. This makes it possible to use the appliance even at very low temperatures (min) 5. C. 2- Selecting the desired humidity level 2- Selecting the desired humidity level2- Selecting the desired humidity level2- Selecting the desired humidity level2- Selecting the desired humidity level2- Selecting the desired humidity level Make sure that you have selected dehumidification mode (Please see “Air dehumidification” chapter). 1. During dehumidification mode, the display will show current ambient air humidity levels as a %. 2. Press the + +++++ or - ----- key The display will show the current humidity setting (desired level) as a flashing %. This means that it is possible to change it. You now have 5 seconds in which to enter a new humidity level selection. 3. Select the desired value by pressing the + or – key. This adjusts the setting in steps of 5%. If either of the two keys is held down continuously, the setting will adjust in steps of 20%. LI DH3650/70 11 28/9/04, 10:36 If no new data are entered after 5 seconds, the value currently displayed will be taken as the new user setting and the display will go back to displaying the actual room humidity levels. The appliance will switch itself off automatically when it reaches the previously specified value, and switch on again if air humidity levels vary by approximately 5%. Note NoteNoteNoteNoteNote Ideal humidity levels recommended by doctors lie between 40 to 60%. Air purification Air purificationAir purificationAir purificationAir purificationAir purification 1. Make sure that you have selected Air Purification mode. 2. Press the “MODE MODEMODEMODEMODEMODE” button once to activate function selection. The dehumidification/ purification indicator lamp will light up, indicating that an operation mode is about to be selected. The display will show the currently selected operation mode (DH DHDHDHDH DH: Dehumidifier,...
Questo manuale è adatto anche per i modelli :scaldabagno - DH3650/02 (393.99 kb)
scaldabagno - DH3650/03 (393.99 kb)
scaldabagno - DH3650/04 (393.99 kb)
scaldabagno - DH3650/07 (393.99 kb)