valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
The exact life of the pre-filter and filter will depend upon the environment. If necessary, the filters should be changed more frequently. The reset the pre-filter or filter timers when one indicator (or both) is lit: 1. Change the fi lter and/or pre-fi lter as described in the Maintenance section of the manual. 2. To reset the counter to zero hours and turn off the indicator, simply press and hold the filter reset key for three seconds. If both the pre-filter and filter indicators are lit, the reset key will first turn off the pre-filter indicator. Then, you must release the reset key and then press and hold the filter reset key again for three seconds to turn off the filter indicator. The reset the pre-filter or filter timers before the indicators are lit: In some environments, you may want to change the pre-filter or filter more frequently than indicated by the filter indicators. This procedure allows you to reset the pre-filter or filter counter before the indicators are lit. 1. Change the fi lter and/or pre-fi lter as described in the Maintenance section of the manual. 2. Now, you must choose which timer you want to reset. Press and hold the filter reset key (approximately three seconds) until the pre-filter indicator flashes. Press the reset key again to alternate between the two indicators. The timer that will be reset is designated by the flashing indicator. 3. Once you have the correct indicator flashing, press and hold the reset key for three seconds to reset that timer to zero hours. The indicator will stop flashing when it has been reset. If needed, repeat these steps to reset the other timer. ENGLISH 41769-01 04/26/2005 ©2005 Hunter Fan Company 41769_rev 04-26-05_B.indd 4 4/26/05, 1:49:25 PM ® 5 Cleaning and Filter Replacement 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. Remove the pre-filter before cleaning the front grill. 2. At least every 90 days, replace the carbon pre-filter. This is necessary to maintain proper odor removing and overall filtration performance. If necessary, it can be changed more often. Mark the new filter installation sticker included with the new carbon pre-filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it in the Air Purifier. 3. While replacing the pre-filter, you should view the condition of the HEPAtech® Filter. Compare the filter to the color coded chart that is on the inside of the housing. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. Mark the new filter installation sticker included with the new HEPAtech® Filter. Depending on use and environment, the HEPAtech® Filter should last four to six months. 4. Gently pull on the filter to remove it from the unit. While removing the filter, note the directional arrows printed on the top of the filter. The new filter will be installed with the same orientation. Once removed, the used filter can be discarded. 5. Remove the new filter from its wrapping and look at the directional arrows printed on the side of the filter. Install the filter with arrows pointing towards the unit. Press the filter firmly into the air purifier. To avoid damaging the filter media, you should press on the frame of the filter only. 6. If you notice a decrease in air output or an increase in noise, the HEPAtech® Filter may be clogged. Replace it with a new HEPAtech® Filter. Replacement Filters To obtain a replacement filter for your Air Purifier, call 1-800-4Hunter for your nearest retailer or Hunter Customer Service at (US) 1-888-830-1326, (Canada) 1-888-855-8300. Please be prepared to tell the operator the model number of your Air Purifi er and the model number of the fi lter you need to replace. Visit our website at Hunter Air Purifier Model No.: 30078 30079 30212 30213 Pre-Filter Replacement Model No.: 30901 30901 30901 30901 HEPAtech® Filter Replacement Model No.: 30928 30928 30931 30931 ENGLISH ©2005 Hunter Fan Company 41769-01 04/26/2005 41769_rev 04-26-05_B.indd 5 4/26/05, 1:49:25 PM 6 ® 41769-01 04/26/2005 ©2005 Hunter Fan Company ENGLISH How the HEPAtech® Air Purifi cation System Works As the air is pulled into the purifi er, the activated carbon pre-fi lter absorbs odors and catches large particles. Then, the air travels through the HEPAtech® fi lter where the smaller particles are collected. Then, the ionizer releases negative ions into the air that attract positively charged dust, smoke, and pollen particles. Finally, the clean, purifi ed air is released back into the room. Other Home Comfort Products from Hunter To learn more about...
Questo manuale è adatto anche per i modelli :Aria - 30212 (1.89 mb)
Aria - 30213 (1.89 mb)
Aria - 30079 (1.89 mb)