valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Unfold and flatten out the black carbon pre-filter. Attach the four corners of the carbon pre-filter to the four hook fasteners on the HEPA filter. Locate the black carbon pre-filter. It will be folded inside a plastic bag. Remove and discard the plastic bag. Installing the Carbon Pre-Filter Insert the two tabs on the bottom of the intake grille into the holes on the bottom ledge of the air purifier. Pivot the intake grille into place and lightly press on the upper corners of the grille to snap it into place. NOTE: The air purifier has a safety switch that prevents operation if the intake grille is not properly installed. DO NOT attempt to override or disable this safety switch. 1 2 3 4 840129900 ENv02.qxd 11/1/04 11:01 AM Page 6 840129900 ENv02.qxd 11/1/04 11:01 AM Page 7 Plugging in the Air Purifier WARNING: To reduce the risk of NOTE: The polarized plug will only electrical shock, never plug in the air fit in one direction—DO NOT try purifier while your hands are wet. to force the plug. If you are unable to Always unplug the air purifier before insert the plug into the outlet, try moving or servicing the unit. reversing the plug. If the plug still does not fit, contact a qualified electrician to replace the obsolete outlet. Setting the Controls – Manual Control Models 1. Germicidal UV Button – Turns on the germicidal UV lamp to reduce harmful bacteria from the filtered air. When this button is on, a bluish glow should be visible through the UV bulb check window on the top of the unit. NOTE: The light will not come on if the fan is turned off. 2. UV “On” Indicator – Lights when the germicidal UV lamp is on. 3. Power On Indicator – Lights when unit is on. 4. Fan Speed Knob – Turn the fan speed knob to the desired setting. There are four settings: • Off • WhisperClean™ – Use for quiet, nighttime operation or for constant low-speed filtration. • Medium – Provides a higher fan speed; use for quickly filtering dust, pollen, smoke, etc. from a room. • QuickClean™ – Provides cleaning during acute needs. 7 840129900 ENv02.qxd 11/1/04 11:01 AM Page 8 Setting the Controls – AirSmart™ Models 1. Germicidal UV Button – Turns on the germicidal UV lamp to reduce harmful bacteria from the filtered air. When this button is on, a bluish glow should be visible through the viewing window on the top of the unit. NOTE: The light will not come on if the fan is turned off. 2. UV “On” Indicator – Lights when the germicidal UV lamp is on. 3. Pre-Filter Timer Reset Button 4. HEPA Filter Timer Reset Button 5. AirSmart™ Display – When the air purifier is first turned on, the AirSmart™ sensor will analyze the air to determine the current air quality. A bar will move back and forth across the display panel until the air quality is determined. This will take about one minute. The sensor will then continue to monitor and show the air quality (poor, fair, or good) in a bar graph in the display. If the fan is set to Auto, the sensor automatically adjusts the fan speed for the most effective air purification. 8 AIR AUTO SELECTED QUALITY FAN SPEED Poor QuickClean™ Fair Medium Good WhisperClean™ The Display also has check marks that will appear to indicate that it is time to check the carbon pre-filter or HEPA filter. See “Checking the Filters” on page 10. Once the filters have been checked, and if neces sary, replaced, press the recessed RESET button with the end of a pen, toothpick, or small nail. This will reset the “timer-like” control. 6. Power On Indicator – Lights when unit is on. 7. Fan Speed Knob – Turn the fan speed knob to the desired setting. There are five settings: • Off • WhisperClean™ – Use for quiet, nighttime operation or for constant low-speed filtration. • Medium – Provides a higher fan speed; use to quickly filter dust, pollen, smoke, etc., from a room. • QuickClean™ – Provides cleaning during acute needs. • Auto – Functions with the AirSmart™ sensor and automatically selects the fan speed depending on the air quality detected. This is the normal setting for continuous use. 840129900 ENv02.qxd 11/1/04 11:02 AM Page 9 How to Clean Your air purifier is designed to provide years of trouble-free service with minimal maintenance. The following instructions will help you maximize the life and efficiency of your air purifier. To reduce risk of electric shock: • Always unplug before cleaning. • Do not immerse in water or other liquid. Cleaning the Air Purifier • Wipe the enclosure, control panel, • The outlet grille should simply be and cord with a damp cloth or dusted. It should not be immersed sponge. in water. • The intake grille can be removed • No part of the air purifier should be and washed in warm, soapy water. placed in a dishwasher. Do not place in dishwasher. Make sure the grille is completely dry before reinstalling. Cleaning the AirSmart™ Sensor On models equipped with the AirSmart™ sensor, it is recommended to clean the sensor monthly. 1. Remove the air sensor cleaner from the storage compartment behind the intake g...
Questo manuale è adatto anche per i modelli :Aria - 04162 (1.44 mb)
Aria - 04160 (1.44 mb)