valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
1. Select the ”Exhaust air/Circulating air” settings area. 2. Set the operating mode with the rotary selector. 34,34, (( 3(34,0, (( 3( 3. Press the t button to switch to the next settings area. The brand logo can be switched on or off. 1. Select the “Display/brand logo” settings area. 2. Using the rotary selector, adjust the display. Press the t button for approx. 3 seconds.The changes to the standard settings are accepted. Operation Switch on the fan and select the fan settings Switch off the fan Intensive setting (fan setting 4) Fan run-on It is recommended to switch on the blower when you start cooking and not to switch it off again until several minutes after you have finished cooking. In this way the kitchen fumes are removed most effectively. Press the w button. The appliance automatically switches to fan setting 2. 01, ( %2 Select the required fan setting by pressing the corresponding Function button (1-3). Press the w button. The Intensive setting generates maximum performance. It can be used if thick fumes or strong odours occur temporarily. Press Function button 4. If the Intensive setting is not switched off by hand, the fan automatically switches back to setting 2 after 10 minutes. Press the+ button. 01, ( %2 !" The fan runs at the selected setting for the set time. Then the fan switches off automatically. Operation Light The light can be switched on and off independently of the fan. 01, ( %#2 !" Set timer Intermittent 1. Press the0 button.The ”Light”area is selected automatically. 2. Set the required luminositywith the rotaryselector. The selected luminosityis indicated on the display. The timer runs independently of the extractor hood. 1. Press theW button.The preset running time of the timer is displayed. 01, ( 2 " !" 2. The running time of the timer can be changed with the rotaryselector. 3. The time runs automatically. The elapsing time is indicated on the display. When the time has elapsed, a signal sounds. Press the W button toend the signal early. Intermittent ventilation can be used to ventilate the kitchen hourly for the preset time. 1. Select a fan setting (except fan setting 4). 5, " ( %2 2. Press theu button.The ”Intermittent”area is selected automatically. Operation Intermittent ventilation starts automatically. The display switches back to idle state after the set time has elapsed. The saturation of the grease filters can be queried via the Information button. To do this, the extractor hood must be switched on. Press thetbutton. Saturation displays Grease filters NOTE 6 )*7, "* 6 )* The saturation display of the grease filters can be reset even before 100 % is reached. 1. Press the t button again. The settings area is lit. 2. Using the rotary selector, set the saturation display to 0 %. If the t button is lit and a signal sounds when the extractor hood has been switched off, the grease filters are 100% saturated. 1. Clean the grease filters o...
Questo manuale è adatto anche per i modelli :Cappe - LC258BA90/03 (3.22 mb)
Cappe - LC928BA90/02 (3.22 mb)
Cappe - LC928BA90/03 (3.22 mb)
Cappe - LC950BA90/02 (3.22 mb)