valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Fold the filter cover upwards. Notes ¦ The opening angle of the filter cover is restricted to approx. 80°. Do not open the filter cover any further, otherwise the hinges may be damaged. ¦ The filter cover locks in any position. 2. Remove the two metal grease filters under the filter cover and the metal grease filter on the underside of the appliance. Unfasten the lock, fold the metal filter forwards and remove it from the bracket. Note: Grease can accumulate at the bottom of the metal grease filter. Hold the metal grease filter level, otherwise grease will drip out. 3. Clean the metal grease filter. 4. After removing the filters, clean the inside of the appliance. 5. Clean the filter cover. Installing the metal mesh grease filter 1. Insert the two metal grease filters under the filter cover with the lock facing downwards. Insert the metal grease filters on the underside of the appliance. 2. Fold the metal grease filters inwards, locking them in place. 3. Close the filter cover. Changing the activated charcoal filter (only in circulating-air mode) In order to guarantee efficient odour filtration, the filter must be serviced regularly. The activated charcoal filters must be replaced at least every 4 months. Notes ¦ The activated charcoal filters are not included in the delivery. The activated charcoal filters can be obtained from specialist retailers, from our after-sales service or from the Online Shop. ¦ The activated charcoal filters cannot be cleaned or reactivated. 1. Remove metal grease filter: See above. 2. Turn the old activated charcoal filter and pull away from the bracket. . 3. Push the new activated charcoal filter onto the bracket and turn. © 4. Fit the metal grease filter: See above. Trouble shooting Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. : Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by one of our trained after-sales technicians. If the appliance is defective, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service. .. .. Malfunction table Problem Possible cause Solution The appliance does not work The plug is not plugged in. Connect the appliance to the electricity supply Power cut Check whether other kitchen appliances are working Faulty fuse Check in the fuse box to make sure that the fuse for the appliance is OK The button illu-The control unit Call the aftersales service. mination does not work. is faulty. The lighting does not work. The bulbs are faulty. For information on changing the bulbs, see the "Replacing Bulbs" section. Replacing bulbs : Risk of electric shock! When changing the bulbs, the bulb socket contacts are live. Before changing the bulb, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Important Only use a bulb of the same type and same power (see also the bulb holder or rating plate). Replacing halogen bulbs Note: When inserting halogen bulbs, do not touch the glass tube. Use a clean cloth to insert the halogen bulbs. 1. Carefully remove the bulb ring using a suitable tool. 2. Pull out the bulb and replace it with a bulb of the same type. 3. Insert the bulb cover. 4. Insert the mains plug or switch on the fuse again. Replace the bulb with one of the same type: Voltage: 12 V Power: max. 20 W Socket: G4 After-sales service Our after-sales s...
Questo manuale è adatto anche per i modelli :Cappe - 3BC8855G/01 (611.36 kb)
Cappe - 3BC8855N/01 (611.36 kb)
Cappe - 3BC8880B/01 (611.36 kb)
Cappe - 3BC8880G/01 (611.36 kb)