|
Facilità d'uso
In doing so, place other hand under the metal grease filter. 2. Take the metal grease filter out of the holder. ............ Note: Grease can accumulate in the bottom of the metal grease filter. Hold the metal grease filter level, otherwise grease will drip out. 3. Clean the metal grease filter. 4. After removing the filters, clean the inside of the appliance. Installing the metal mesh grease filter 1. Insert the metal mesh grease filter. While doing this, place the other hand under the metal mesh grease filter. 2. Fold the metal mesh grease filter upwards, locking it in place. Changing the activated charcoal filter (only in circulating-air mode) In order to guarantee efficient odour filtration, the filter must be serviced regularly. The activated charcoal filters must be replaced at least every 4 months. Notes ¦ The activated charcoal filters are not included in the delivery. The activated charcoal filters can be obtained from specialist retailers, from our after-sales service or from the Online Shop. ¦ The activated charcoal filters cannot be cleaned or reactivated. 1. For removing the metal grease filter, see above. 2. Withdraw the old activated charcoal filters from the holder. 3. Press the new activated charcoal filters onto the holder until they can be heard to lock in place. 4. For fitting the metal grease filter, see above. Trouble shooting Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. : Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by one of our trained after-sales technicians. If the appliance is defective, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service. Malfunction table Problem Possible cause Solution The appliance does not work The plug is not plugged in. Connect the appliance to the electricity supply Power cut Check whether other kitchen appliances are working Faulty fuse Check in the fuse box to make sure that the fuse for the appliance is OK The lighting does not work. The bulbs are faulty. For information on changing the bulbs, see the "Replacing Bulbs" section. Replacing bulbs : Risk of electric shock! When changing the bulbs, the bulb socket contacts are live. Before changing the bulb, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Important Only use a bulb of the same type and same power (see also the bulb holder or rating plate). Replacing halogen bulbs Note: When inserting halogen bulbs, do not touch the glass tube. Use a clean cloth to insert the halogen bulbs. 1. Carefully remove the bulb ring using a suitable tool. 2. Pull out the bulb and replace it with a bulb of the same type. 3. Insert the bulb cover. 4. Insert the mains plug or switch on the fuse again. Replace the bulb with one of the same type: Voltage: 12 V Power: max. 20 W Socket: G4 After-sales service Our after-sales service is there for you if your appliance needs to be repaired. We will always find the right solution in order to avoid unnecessary visits from a service technician. When calling us, please give the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. The rating plate with these numbers can be found inside the appliance (remove the metal mesh grease filter to gain access). You can make a note of the numbers of your appliance and the telephone number of the after-sales service in the space below to save time should it be required. E no. FD no. After-sales serviceO Please be aware that a visit by an after-sales engineer will be charged if a problem turns out to be the result of operator error, even during the warranty period. Please find the contact data of all countries in the enclosed customer service list. To book an engineer visit and product advice GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute. A call set-up fee of up to 6 pence may apply. IE 01450 2655 0.03 € per minute at peak. Off peak 0.0088 € per minute. Trust the expertise of the manufacturer, and rest assured that the repair will be carried out by trained service technicians using original spare parts for your domestic appliance. Accessories for circulating-air mode Activated charcoal filter LZ26000 8 . ..[.....]... ..................................................................................8 .......................................................................................8 .......................................................................................10 .......................................................................................10 .......................................................................................10 ..................................................................................10 ...................................................................
Questo manuale è adatto anche per i modelli :Cappe - LI96022HK/01 (1.38 mb)