Log:
valutazioni - 4, GPA: 4.3 ( )

Istruzioni per l'uso Amana, Modello 3UHSDUH

Produttore : Amana
File Size : 112.72 kb
File Nome : a9ec5ddc-49eb-4424-afb7-70baabc38342.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


If the floor is not level it is necessary to shim the rear wheels onto a piece of plywood or other shim material so refrigerator is level. A WARNING To avoid electrical shock which can cause severe personal injury or death, disconnect power outlet from main power supply before installing or servicing refrigerator. Prepare refrigerator for delivery Some installations may require door removal to get the refrigerator into the home. 1. Remove toe grille. 2. Remove top hinge cover and top hinge. Dispensing and Electronic Models • Disconnect wire connectors. Loosen the water tube clamp (A). Loosen the water tube union nut (B). Pull the water tube away from the union nut and through the tube clamp. Unplug electrical connector from voltage box (C)> CAUTION To avoid electrical shock which can cause severe personal injury or death, green ground wire must remain attached to hinge. Remove doors. • Remove top hinges. • Remove doors from bottom hinge. • Remove bottom hinge. Top right 4. Attach refrigerator to appliance cart CAUTION To avoid floor and wall damage protect walls and soft vinyl or other flooring with masonite or other protective material when moving the refrigerator. /3 Install refrigerator 1. Reinstall doors by performing section 2 in reverse order. 2. Connect ice maker water supply line. (Refer to Owner's Manual) 3. Plug power cord into electrical receptacle. 4. Move refrigerator into final location. 5. Once refrigerator is located and stable, level refrigerator by adjusting front, and rear (some models) cabinet leveling adjustment screws. 6. Reconnect power from power source to electrical receptacle. 7. Align doors. • To align tops of doors loosen the 2 bottom right side hinge screws. Turn cam to raise or lower refrigerator door (Some models). (Refer to label inside refrigerator compartment on bottom mullion.) • Tighten the 2 hinge screws. 8. Replace toe grille. 4 Prepare refrigerator for use. 1. Remove all interior packaging material. 4. Verify power to refrigerator is connected. 2. Clean interior and exterior of refrigerator. 3. Instruct consumer on controls and features. --- Part No. 12123312 Printed in U.S.A....


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie